Global Thread Rolling Machine Market: Slow but Steady Growth Expected with +0.2% CAGR

IndexBox has just published a new report: World - Thread Rolling Machines For Working Metal, Sintered Metal Carbides Or Cermets - Market Analysis, Forecast, Size, Trends And Insights.

The article discusses the expected growth of the thread rolling machine market worldwide, with rising demand driving an upward consumption trend. Projections indicate a slight increase in market performance with a forecasted CAGR of +0.2% in volume and +3.5% in value from 2024 to 2030, leading to a significant growth in market volume and value by the end of the period.

Market Forecast

Driven by rising demand for thread rolling machine worldwide, the market is expected to start an upward consumption trend over the next six-year period. The performance of the market is forecast to increase slightly, with an anticipated CAGR of +0.2% for the period from 2024 to 2030, which is projected to bring the market volume to 113K units by the end of 2030.

In value terms, the market is forecast to increase with an anticipated CAGR of +3.5% for the period from 2024 to 2030, which is projected to bring the market value to $1.1B (in nominal wholesale prices) by the end of 2030.

Consumption

World Consumption of Thread Rolling Machines For Working Metal, Sintered Metal Carbides Or Cermets

Global thread rolling machine consumption reached 112K units in 2024, therefore, remained relatively stable against 2023 figures. Overall, consumption, however, continues to indicate a slight descent. Over the period under review, global consumption attained the peak volume at 131K units in 2019; however, from 2020 to 2024, consumption remained at a lower figure.

The global thread rolling machine market revenue soared to $895M in 2024, rising by 43% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). In general, consumption, however, recorded a relatively flat trend pattern. Global consumption peaked at $1.2B in 2016; however, from 2017 to 2024, consumption failed to regain momentum.

Consumption By Country

China (58K units) remains the largest thread rolling machine consuming country worldwide, accounting for 52% of total volume. Moreover, thread rolling machine consumption in China exceeded the figures recorded by the second-largest consumer, India (16K units), fourfold. The third position in this ranking was taken by Germany (8.2K units), with a 7.3% share.

From 2013 to 2024, the average annual growth rate of volume in China amounted to -3.3%. In the other countries, the average annual rates were as follows: India (+28.9% per year) and Germany (-5.7% per year).

In value terms, the largest thread rolling machine markets worldwide were Germany ($222M), China ($143M) and India ($106M), with a combined 53% share of the global market. Spain, the UK, Russia, the United States, Malaysia, Italy and Brazil lagged somewhat behind, together accounting for a further 28%.

In terms of the main consuming countries, Russia, with a CAGR of +34.0%, recorded the highest growth rate of market size over the period under review, while market for the other global leaders experienced more modest paces of growth.

The countries with the highest levels of thread rolling machine per capita consumption in 2024 were Germany (99 units per million persons), Spain (57 units per million persons) and Malaysia (56 units per million persons).

From 2013 to 2024, the most notable rate of growth in terms of consumption, amongst the key consuming countries, was attained by Russia (with a CAGR of +38.3%), while consumption for the other global leaders experienced more modest paces of growth.

Production

World Production of Thread Rolling Machines For Working Metal, Sintered Metal Carbides Or Cermets

After four years of growth, production of thread rolling machines for working metal, sintered metal carbides or cermets decreased by -5.7% to 123K units in 2024. Overall, production continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2018 with an increase of 1.7% against the previous year. Global production peaked at 131K units in 2023, and then dropped in the following year.

In value terms, thread rolling machine production soared to $817M in 2024 estimated in export price. In general, production saw a noticeable contraction. The most prominent rate of growth was recorded in 2016 with an increase of 28% against the previous year. As a result, production attained the peak level of $1.3B. From 2017 to 2024, global production growth remained at a lower figure.

Production By Country

China (93K units) remains the largest thread rolling machine producing country worldwide, accounting for 76% of total volume. Moreover, thread rolling machine production in China exceeded the figures recorded by the second-largest producer, Germany (8.5K units), more than tenfold. The United States (4.5K units) ranked third in terms of total production with a 3.7% share.

In China, thread rolling machine production remained relatively stable over the period from 2013-2024. The remaining producing countries recorded the following average annual rates of production growth: Germany (-5.8% per year) and the United States (+0.5% per year).

Imports

World Imports of Thread Rolling Machines For Working Metal, Sintered Metal Carbides Or Cermets

In 2024, the amount of thread rolling machines for working metal, sintered metal carbides or cermets imported worldwide surged to 32K units, with an increase of 63% compared with 2023. In general, imports recorded a prominent expansion. As a result, imports attained the peak and are likely to continue growth in the immediate term.

In value terms, thread rolling machine imports stood at $132M in 2024. The total import value increased at an average annual rate of +2.5% over the period from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2018 with an increase of 15%. Over the period under review, global imports reached the peak figure in 2024 and are expected to retain growth in years to come.

Imports By Country

India was the main importing country with an import of around 17K units, which amounted to 54% of total imports. Russia (3.6K units) ranks second in terms of the total imports with an 11% share, followed by Brazil (7.1%) and Malaysia (6.3%).

India was also the fastest-growing in terms of the thread rolling machines for working metal, sintered metal carbides or cermets imports, with a CAGR of +43.4% from 2013 to 2024. At the same time, Russia (+38.2%), Brazil (+8.0%) and Malaysia (+4.0%) displayed positive paces of growth. While the share of India (+50 p.p.) and Russia (+9.9 p.p.) increased significantly in terms of the global imports from 2013-2024, the share of Brazil (-5.4 p.p.) and Malaysia (-10.6 p.p.) displayed negative dynamics.

In value terms, India ($44M) constitutes the largest market for imported thread rolling machines for working metal, sintered metal carbides or cermets worldwide, comprising 34% of global imports. The second position in the ranking was taken by Malaysia ($6.3M), with a 4.8% share of global imports. It was followed by Russia, with a 4.3% share.

From 2013 to 2024, the average annual rate of growth in terms of value in India amounted to +24.4%. The remaining importing countries recorded the following average annual rates of imports growth: Malaysia (+11.9% per year) and Russia (+5.9% per year).

Import Prices By Country

The average thread rolling machine import price stood at $4.1 thousand per unit in 2024, waning by -31.1% against the previous year. Over the period under review, the import price continues to indicate a deep downturn. The pace of growth appeared the most rapid in 2022 when the average import price increased by 42% against the previous year. Global import price peaked at $16 thousand per unit in 2016; however, from 2017 to 2024, import prices remained at a lower figure.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Malaysia ($3.1 thousand per unit), while Brazil ($1.1 thousand per unit) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Malaysia (+7.6%), while the other global leaders experienced a decline in the import price figures.

Exports

World Exports of Thread Rolling Machines For Working Metal, Sintered Metal Carbides Or Cermets

In 2024, approx. 44K units of thread rolling machines for working metal, sintered metal carbides or cermets were exported worldwide; growing by 9% against 2023 figures. Overall, exports saw buoyant growth. The growth pace was the most rapid in 2021 with an increase of 406% against the previous year. As a result, the exports attained the peak of 95K units. From 2022 to 2024, the growth of the global exports remained at a somewhat lower figure.

In value terms, thread rolling machine exports reached $129M in 2024. The total export value increased at an average annual rate of +1.4% from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2023 with an increase of 19% against the previous year. Over the period under review, the global exports attained the maximum in 2024 and are likely to see steady growth in years to come.

Exports By Country

China prevails in exports structure, accounting for 35K units, which was approx. 81% of total exports in 2024. It was distantly followed by India (2.2K units), mixing up a 5.1% share of total exports. Taiwan (Chinese) (1.9K units) and Pakistan (1K units) took a little share of total exports.

From 2013 to 2024, average annual rates of growth with regard to thread rolling machine exports from China stood at +18.6%. At the same time, Pakistan (+75.6%), India (+37.2%) and Taiwan (Chinese) (+7.1%) displayed positive paces of growth. Moreover, Pakistan emerged as the fastest-growing exporter exported in the world, with a CAGR of +75.6% from 2013-2024. From 2013 to 2024, the share of China, India and Pakistan increased by +25, +4.4 and +2.2 percentage points, respectively.

In value terms, the largest thread rolling machine supplying countries worldwide were China ($29M), Taiwan (Chinese) ($28M) and India ($1.6M), together comprising 46% of global exports. These countries were followed by Pakistan, which accounted for a further 0.1%.

Pakistan, with a CAGR of +23.7%, recorded the highest growth rate of the value of exports, among the main exporting countries over the period under review, while shipments for the other global leaders experienced more modest paces of growth.

Export Prices By Country

The average thread rolling machine export price stood at $2.9 thousand per unit in 2024, dropping by -6.7% against the previous year. Over the period under review, the export price saw a abrupt slump. The most prominent rate of growth was recorded in 2022 an increase of 213% against the previous year. The global export price peaked at $20 thousand per unit in 2016; however, from 2017 to 2024, the export prices stood at a somewhat lower figure.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Taiwan (Chinese) ($15 thousand per unit), while Pakistan ($154 per unit) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Taiwan (Chinese) (-4.9%), while the other global leaders experienced a decline in the export price figures.

Source: IndexBox Market Intelligence Platform