Africa: Market for Safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels 2022

Market Size for Safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels in Africa

In 2020, the African market for safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses decreased by -X% to $X, falling for the second year in a row after three years of growth. The market value increased at an average annual rate of +X% from 2007 to 2020; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2008 with an increase of X% against the previous year. The level of consumption peaked at $X in 2018; however, from 2019 to 2020, consumption failed to regain the momentum.

Production of Safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels in Africa

In value terms, production of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses rose sharply to $X in 2020 estimated in export prices. The total output value increased at an average annual rate of +X% over the period from 2007 to 2020; the trend pattern remained consistent, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2008 when the production volume increased by X% year-to-year. The level of production peaked in 2020 and is likely to see gradual growth in the immediate term.

Production By Country in Africa

The countries with the highest volumes of production of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses in 2020 were Egypt (X square meters), South Africa (X square meters) and Kenya (X square meters), with a combined X% share of total production. These countries were followed by Morocco, Zimbabwe and Gambia, which together accounted for a further X 2007 to 2020, the biggest increases were in Morocco, while production of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses for the other leaders experienced more modest paces of growth.

Exports of Safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels

Exports in Africa

For the sixth consecutive year, Africa recorded growth in shipments abroad of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses, which increased by X% to X square meters in 2020. Over the period under review, exports recorded prominent growth. The most prominent rate of growth was recorded in 2018 when exports increased by X% y-o-y. Over the period under review, exports attained the maximum in 2020 and are expected to retain growth in the immediate term.

In value terms, exports of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses surged to $X in 2020. Overall, exports recorded a remarkable increase. The most prominent rate of growth was recorded in 2018 with an increase of X% against the previous year. The level of export peaked in 2020 and is likely to continue growth in the immediate term.

Exports by Country

In 2020, Morocco (X square meters) was the key exporter of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses, creating X% of total exports. South Africa (X square meters) held a X% share (based on tons) of total exports, which put it in second place, followed by Egypt (X%).

Morocco was also the fastest-growing in terms of the safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses exports, with a CAGR of +X% from 2007 to 2020. South Africa (-X%) and Egypt (-X%) illustrated a downward trend over the same period. While the share of Morocco (+X p.p.) increased significantly in terms of the total exports from 2007-2020, the share of Egypt (-X p.p.) and South Africa (-X p.p.) displayed negative dynamics.

In value terms, Morocco ($X) remains the largest safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels supplier in Africa, comprising X% of total exports. The second position in the ranking was occupied by South Africa ($X), with a X% share of total exports.

In Morocco, exports of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses expanded at an average annual rate of +X% over the period from 2007-2020. In the other countries, the average annual rates were as follows: South Africa (-X% per year) and Egypt (-X% per year).

Export Prices by Country

In 2020, the export price for safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses in Africa amounted to $X per square meter, stabilizing at the previous year. Over the last thirteen-year period, it increased at an average annual rate of +X%. The pace of growth appeared the most rapid in 2008 when the export price increased by X% year-to-year. Over the period under review, export prices attained the peak figure at $X per square meter in 2014; however, from 2015 to 2020, export prices failed to regain the momentum.

Prices varied noticeably by the country of origin; the country with the highest price was South Africa ($X per square meter), while Egypt ($X per square meter) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Egypt, while the other leaders experienced mixed trends in the export price figures.

Imports of Safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels

Imports in Africa

In 2020, after thirteen years of growth, there was significant decline in overseas purchases of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses, when their volume decreased by -X% to X square meters. Over the period under review, imports, however, continue to indicate prominent growth. The pace of growth appeared the most rapid in 2011 with an increase of X% y-o-y. Over the period under review, imports reached the peak figure at X square meters in 2019, and then fell dramatically in the following year.

In value terms, imports of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses declined sharply to $X in 2020. Overall, imports, however, posted a resilient expansion. The most prominent rate of growth was recorded in 2011 when imports increased by X% y-o-y. The level of import peaked at $X in 2018; however, from 2019 to 2020, imports stood at a somewhat lower figure.

Imports by Country

In 2020, Morocco (X square meters), distantly followed by South Africa (X square meters), Algeria (X square meters), Nigeria (X square meters), Ghana (X square meters), Sudan (X square meters) and Kenya (X square meters) were the largest importers of safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses, together achieving X% of total imports. Tanzania (X square meters), Uganda (X square meters), Cote d'Ivoire (X square meters), Ethiopia (X square meters), Libya (X square meters) and Tunisia (X square meters) followed a long way behind the leaders.

From 2007 to 2020, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Morocco, while imports for the other leaders experienced more modest paces of growth.

In value terms, the largest safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels importing markets in Africa were South Africa ($X), Morocco ($X) and Algeria ($X), with a combined X% share of total imports. These countries were followed by Ghana, Kenya, Nigeria, Sudan, Tanzania, Tunisia, Ethiopia, Cote d'Ivoire, Libya and Uganda, which together accounted for a further X terms of the main importing countries, Ethiopia recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The import price for safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses in Africa stood at $X per square meter in 2020, falling by -X% against the previous year. In general, the import price showed a abrupt slump. The most prominent rate of growth was recorded in 2018 an increase of X% against the previous year. The level of import peaked at $X per square meter in 2007; however, from 2008 to 2020, import prices remained at a lower figure.

Prices varied noticeably by the country of destination; the country with the highest price was Tunisia ($X per square meter), while Uganda ($X per square meter) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Ethiopia, while the other leaders experienced a decline in the import price figures.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :