![Report Australia and Oceania - Moulds for Mineral Materials - Market Analysis, Forecast, Size, Trends and Insights for 499$](/landing/img/reports/australia-and-oceania-moulds-for-mineral-materials-market-analysis-forecast-size-trends-and-insights.webp)
Australia and Oceania - Moulds for Mineral Materials - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAustralia and Oceania: Market for Moulds For Mineral Materials 2025
Market Size for Moulds For Mineral Materials in Australia and Oceania
The mould for mineral materials market in Australia and Oceania soared to $X in 2022, with an increase of 25% against the previous year. The total consumption indicated a perceptible increase from 2012 to 2022: its value increased at an average annual rate of +4.8% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by +21.9% against 2018 indices. The level of consumption peaked in 2022 and is likely to see gradual growth in the immediate term.
Production of Moulds For Mineral Materials in Australia and Oceania
In value terms, mould for mineral materials production totaled $X in 2022 estimated in export price. Over the period under review, production, however, showed a measured expansion. The most prominent rate of growth was recorded in 2017 with an increase of 422% against the previous year. The level of production peaked at $X in 2018; however, from 2019 to 2022, production remained at a lower figure.
Exports of Moulds For Mineral Materials
Exports in Australia and Oceania
After two years of growth, shipments abroad of moulds for mineral materials decreased by -48.4% to X units in 2022. In general, exports showed a abrupt contraction. The growth pace was the most rapid in 2017 with an increase of 755%. As a result, the exports attained the peak of X units. From 2018 to 2022, the growth of the exports remained at a somewhat lower figure.
In value terms, mould for mineral materials exports stood at $X in 2022. Overall, exports, however, saw a measured expansion. The pace of growth appeared the most rapid in 2015 when exports increased by 524% against the previous year. As a result, the exports attained the peak of $X. From 2016 to 2022, the growth of the exports remained at a lower figure.
Exports by Country
Australia was the key exporting country with an export of about X units, which recorded 83% of total exports. It was distantly followed by New Zealand (X units), committing a 17% share of total exports.
From 2012 to 2022, average annual rates of growth with regard to mould for mineral materials exports from Australia stood at -12.6%. At the same time, New Zealand (+10.5%) displayed positive paces of growth. Moreover, New Zealand emerged as the fastest-growing exporter exported in Australia and Oceania, with a CAGR of +10.5% from 2012-2022. While the share of New Zealand (+15 p.p.) increased significantly in terms of the total exports from 2012-2022, the share of Australia (-11.1 p.p.) displayed negative dynamics.
In value terms, Australia ($X) and New Zealand ($X) appeared to be the countries with the highest levels of exports in 2022.
In terms of the main exporting countries, New Zealand, with a CAGR of +28.7%, recorded the highest rates of growth with regard to the value of exports, over the period under review.
Export Prices by Country
The export price in Australia and Oceania stood at $X per unit in 2022, increasing by 105% against the previous year. Overall, the export price recorded a buoyant increase. The most prominent rate of growth was recorded in 2019 an increase of 348%. The level of export peaked in 2022 and is likely to see steady growth in the immediate term.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was New Zealand ($X per unit), while Australia stood at $X per unit.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by New Zealand (+16.5%).
Imports of Moulds For Mineral Materials
Imports in Australia and Oceania
In 2022, mould for mineral materials imports in Australia and Oceania soared to X units, increasing by 27% against 2021. Overall, imports, however, continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 with an increase of 50% against the previous year. The volume of import peaked at X units in 2014; however, from 2015 to 2022, imports remained at a lower figure.
In value terms, mould for mineral materials imports soared to $X in 2022. Total imports indicated prominent growth from 2012 to 2022: its value increased at an average annual rate of +7.2% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by +94.0% against 2017 indices. The pace of growth appeared the most rapid in 2018 when imports increased by 39% against the previous year. Over the period under review, imports reached the maximum in 2022 and are likely to see steady growth in the immediate term.
Imports by Country
Australia represented the major importing country with an import of around X units, which amounted to 73% of total imports. It was distantly followed by New Zealand (X units), mixing up a 19% share of total imports. The following importers - Marshall Islands (X units) and New Caledonia (X units) - together made up 6.9% of total imports.
Imports into Australia decreased at an average annual rate of -3.0% from 2012 to 2022. At the same time, New Caledonia (+45.7%), Marshall Islands (+39.8%) and New Zealand (+19.5%) displayed positive paces of growth. Moreover, New Caledonia emerged as the fastest-growing importer imported in Australia and Oceania, with a CAGR of +45.7% from 2012-2022. New Zealand (+16 p.p.), Marshall Islands (+3.6 p.p.) and New Caledonia (+3.1 p.p.) significantly strengthened its position in terms of the total imports, while Australia saw its share reduced by -19.9% from 2012 to 2022, respectively.
In value terms, Australia ($X) constitutes the largest market for imported moulds for mineral materials in Australia and Oceania, comprising 77% of total imports. The second position in the ranking was taken by New Zealand ($X), with a 20% share of total imports. It was followed by New Caledonia, with a 2.5% share.
From 2012 to 2022, the average annual growth rate of value in Australia totaled +5.4%. The remaining importing countries recorded the following average annual rates of imports growth: New Zealand (+24.2% per year) and New Caledonia (+42.1% per year).
Import Prices by Country
In 2022, the import price in Australia and Oceania amounted to $X per unit, almost unchanged from the previous year. Over the period under review, the import price, however, showed a prominent expansion. The pace of growth appeared the most rapid in 2018 when the import price increased by 57% against the previous year. Over the period under review, import prices attained the peak figure at $X per unit in 2021, and then declined modestly in the following year.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Australia ($X per unit), while Marshall Islands ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Australia (+8.7%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for mould for mineral materials in Australia and Oceania. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735060 - Moulds for mineral materials
Country coverage:
- Australia
- Cook Islands
- Fiji
- French Polynesia
- Kiribati
- Marshall Islands
- Micronesia
- New Caledonia
- New Zealand
- Northern Mariana Islands
- Palau
- Papua New Guinea
- Samoa
- Solomon Islands
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Wallis and Futuna Islands
- American Samoa
- Nauru
- Niue
- Guam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Australia and Oceania, split by region and country
- Trade (exports and imports) in Australia and Oceania
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Australia
- Cook Islands
- Fiji
- French Polynesia
- Kiribati
- Marshall Islands
- Micronesia
- New Caledonia
- New Zealand
- Northern Mariana Islands
- Palau
- Papua New Guinea
- Samoa
- Solomon Islands
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Wallis and Futuna Islands
- American Samoa
- Nauru
- Niue
- Guam
-
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption, By Country, 2018–2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Destination, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Origin, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Consumption, By Country, 2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Production, By Country, 2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, 2012–2024
Recommended reports
This report provides an in-depth analysis of the market for mould for mineral materials in Asia.
This report provides an in-depth analysis of the market for mould for mineral materials in the U.S..
This report provides an in-depth analysis of the market for mould for mineral materials in China.
This report provides an in-depth analysis of the market for mould for mineral materials in the EU.
This report provides an in-depth analysis of the global market for mould for mineral materials.