
Australia and Oceania - Sheet Piling of Steel - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAustralia and Oceania: Steel Sheet Piling Market 2025
Steel Sheet Piling Market Size in Australia and Oceania
In 2022, the steel sheet piling market in Australia and Oceania increased by 0.7% to $X, rising for the third consecutive year after two years of decline. The market value increased at an average annual rate of +3.9% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The level of consumption peaked at $X in 2017; afterwards, it flattened through to 2022.
Steel Sheet Piling Production in Australia and Oceania
In value terms, steel sheet piling production amounted to $X in 2022 estimated in export price. Over the period under review, production, however, recorded a relatively flat trend pattern. The pace of growth appeared the most rapid in 2018 when the production volume increased by 5.8% against the previous year. As a result, production reached the peak level of $X. From 2019 to 2022, production growth failed to regain momentum.
Steel Sheet Piling Exports
Exports in Australia and Oceania
In 2022, the amount of sheet piling of steel exported in Australia and Oceania fell notably to X tons, declining by -77.7% compared with 2021. Over the period under review, exports faced a sharp contraction. The most prominent rate of growth was recorded in 2015 with an increase of 138%. Over the period under review, the exports reached the peak figure at X tons in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
In value terms, steel sheet piling exports declined dramatically to $X in 2022. In general, exports showed a dramatic decrease. The most prominent rate of growth was recorded in 2018 when exports increased by 287% against the previous year. Over the period under review, the exports reached the maximum at $X in 2012; however, from 2013 to 2022, the exports failed to regain momentum.
Exports by Country
Australia represented the largest exporter of sheet piling of steel in Australia and Oceania, with the volume of exports amounting to X tons, which was near 81% of total exports in 2022. It was distantly followed by New Zealand (X tons), committing an 18% share of total exports.
From 2012 to 2022, average annual rates of growth with regard to steel sheet piling exports from Australia stood at -22.3%. New Zealand (-17.9%) illustrated a downward trend over the same period. New Zealand (+6.6 p.p.) significantly strengthened its position in terms of the total exports, while Australia saw its share reduced by -7.2% from 2012 to 2022, respectively.
In value terms, Australia ($X) remains the largest steel sheet piling supplier in Australia and Oceania, comprising 92% of total exports. The second position in the ranking was taken by New Zealand ($X), with a 7.9% share of total exports.
In Australia, steel sheet piling exports contracted by an average annual rate of -25.1% over the period from 2012-2022.
Export Prices by Country
The export price in Australia and Oceania stood at $X per ton in 2022, increasing by 103% against the previous year. In general, the export price, however, recorded a pronounced decrease. The growth pace was the most rapid in 2020 an increase of 352%. The level of export peaked at $X per ton in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Australia ($X per ton), while New Zealand stood at $X per ton.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by New Zealand (-2.9%).
Steel Sheet Piling Imports
Imports in Australia and Oceania
In 2022, approx. X tons of sheet piling of steel were imported in Australia and Oceania; which is down by -17.8% on 2021 figures. Over the period under review, imports continue to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2013 with an increase of 42%. As a result, imports reached the peak of X tons. From 2014 to 2022, the growth of imports remained at a lower figure.
In value terms, steel sheet piling imports reached $X in 2022. Overall, imports, however, showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2017 with an increase of 48% against the previous year. Over the period under review, imports hit record highs at $X in 2013; however, from 2014 to 2022, imports remained at a lower figure.
Imports by Country
In 2022, French Polynesia (X tons) represented the main importer of sheet piling of steel, generating 31% of total imports. It was distantly followed by Solomon Islands (X tons), New Zealand (X tons), Papua New Guinea (X tons), Guam (X tons) and New Caledonia (X tons), together constituting a 59% share of total imports. Fiji (X tons) took a little share of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Solomon Islands (with a CAGR of +27.4%), while imports for the other leaders experienced more modest paces of growth.
In value terms, French Polynesia ($X) constitutes the largest market for imported sheet piling of steel in Australia and Oceania, comprising 39% of total imports. The second position in the ranking was held by New Zealand ($X), with a 17% share of total imports. It was followed by Guam, with a 13% share.
From 2012 to 2022, the average annual rate of growth in terms of value in French Polynesia totaled +21.3%. In the other countries, the average annual rates were as follows: New Zealand (-7.8% per year) and Guam (-3.3% per year).
Import Prices by Country
In 2022, the import price in Australia and Oceania amounted to $X per ton, picking up by 24% against the previous year. Over the last decade, it increased at an average annual rate of +1.1%. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was French Polynesia ($X per ton), while Solomon Islands ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by New Zealand (+3.5%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the steel sheet piling market in Australia and Oceania. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24107410 - Sheet piling (of steel)
- Prodcom 2410T251 - Sheet piling
Country coverage:
- Australia
- Cook Islands
- Fiji
- French Polynesia
- Kiribati
- Marshall Islands
- Micronesia
- New Caledonia
- New Zealand
- Northern Mariana Islands
- Palau
- Papua New Guinea
- Samoa
- Solomon Islands
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Wallis and Futuna Islands
- American Samoa
- Nauru
- Niue
- Guam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Australia and Oceania, split by region and country
- Trade (exports and imports) in Australia and Oceania
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Australia
- Cook Islands
- Fiji
- French Polynesia
- Kiribati
- Marshall Islands
- Micronesia
- New Caledonia
- New Zealand
- Northern Mariana Islands
- Palau
- Papua New Guinea
- Samoa
- Solomon Islands
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Wallis and Futuna Islands
- American Samoa
- Nauru
- Niue
- Guam
-
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption, By Country, 2018–2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Destination, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Origin, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Consumption, By Country, 2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Production, By Country, 2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, 2012–2024
Recommended reports
This report provides an in-depth analysis of the steel sheet piling market in Asia.
This report provides an in-depth analysis of the steel sheet piling market in the U.S..
This report provides an in-depth analysis of the steel sheet piling market in China.
This report provides an in-depth analysis of the steel sheet piling market in the EU.
This report provides an in-depth analysis of the global steel sheet piling market.