Australia: Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2024

Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in Australia

In 2022, the Australian market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids decreased by -20.9% to $X, falling for the second year in a row after three years of growth. Over the period under review, consumption continues to indicate a abrupt contraction. Over the period under review, the market attained the peak level at $X in 2015; however, from 2016 to 2022, consumption remained at a lower figure.

Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in Australia

In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids expanded sharply to $X in 2022 estimated in export price. Overall, production, however, showed a deep reduction. The growth pace was the most rapid in 2018 with an increase of 122% against the previous year. Over the period under review, production of attained the peak level at $X in 2014; however, from 2015 to 2022, production stood at a somewhat lower figure.

Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Exports from Australia

In 2022, overseas shipments of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids increased by 63% to X units, rising for the third consecutive year after seven years of decline. Over the period under review, exports, however, saw a slight downturn. Over the period under review, the exports of attained the peak figure at X units in 2012; however, from 2013 to 2022, the exports failed to regain momentum.

In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids declined to $X in 2022. In general, exports, however, recorded a abrupt setback. The most prominent rate of growth was recorded in 2021 when exports increased by 50%. The exports peaked at $X in 2012; however, from 2013 to 2022, the exports failed to regain momentum.

Exports by Country

Egypt (X units) was the main destination for exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids from Australia, accounting for a 45% share of total exports. Moreover, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids to Egypt exceeded the volume sent to the second major destination, Pakistan (X units), fourfold. Brazil (X units) ranked third in terms of total exports with a 6.6% share.

From 2012 to 2022, the average annual growth rate of volume to Egypt totaled +113.7%. Exports to the other major destinations recorded the following average annual rates of exports growth: Pakistan (+39.7% per year) and Brazil (+6.0% per year).

In value terms, Brazil ($X) remains the key foreign market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids exports from Australia, comprising 17% of total exports. The second position in the ranking was held by Canada ($X), with a 7% share of total exports. It was followed by Papua New Guinea, with a 6.9% share.

From 2012 to 2022, the average annual growth rate of value to Brazil stood at -4.0%. Exports to the other major destinations recorded the following average annual rates of exports growth: Canada (-13.4% per year) and Papua New Guinea (-10.2% per year).

Export Prices by Country

The average export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X per unit in 2022, falling by -46.9% against the previous year. In general, the export price recorded a abrupt decrease. The pace of growth was the most pronounced in 2019 an increase of 30%. The export price peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices stood at a somewhat lower figure.

Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Canada ($X per unit), while the average price for exports to Pakistan ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to New Caledonia (+11.7%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Imports into Australia

In 2022, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids into Australia soared to X units, increasing by 15% against the previous year's figure. The total import volume increased at an average annual rate of +1.2% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2018 with an increase of 29%. As a result, imports reached the peak of X units. From 2019 to 2022, the growth of imports of failed to regain momentum.

In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids fell sharply to $X in 2022. In general, imports, however, saw a noticeable setback. The most prominent rate of growth was recorded in 2021 with an increase of 60%. As a result, imports reached the peak of $X, and then contracted significantly in the following year.

Imports by Country

In 2022, China (X units) constituted the largest supplier of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids to Australia, accounting for a 42% share of total imports. Moreover, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids from China exceeded the figures recorded by the second-largest supplier, Italy (X units), threefold. The third position in this ranking was taken by the UK (X units), with a 6% share.

From 2012 to 2022, the average annual rate of growth in terms of volume from China was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (+8.1% per year) and the UK (+8.6% per year).

In value terms, the UK ($X), China ($X) and Germany ($X) appeared to be the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids suppliers to Australia, with a combined 69% share of total imports. The United States, Italy, Malaysia, the Netherlands, Thailand and Singapore lagged somewhat behind, together accounting for a further 11%.

In terms of the main suppliers, the Netherlands, with a CAGR of +23.5%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2022, the average import price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids amounted to $X per unit, reducing by -38.3% against the previous year. Overall, the import price saw a noticeable decline. The pace of growth was the most pronounced in 2021 when the average import price increased by 87%. As a result, import price attained the peak level of $X per unit, and then fell significantly in the following year.

There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was the UK ($X per unit), while the price for Singapore ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (+6.2%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :