Report Australia - Orthopaedic Appliances and Splints - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update Jan 1, 2025

Australia - Orthopaedic Appliances and Splints - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

Australia: Orthopaedic Appliances Market 2025

Orthopaedic Appliances Market Size in Australia

In 2022, after two years of growth, there was significant decline in the Australian orthopaedic appliances market, when its value decreased by -7.7% to $X. The market value increased at an average annual rate of +3.7% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Orthopaedic appliances consumption peaked at $X in 2021, and then declined in the following year.

Orthopaedic Appliances Exports

Exports from Australia

Orthopaedic appliances exports from Australia surged to X tons in 2022, increasing by 17% compared with the previous year's figure. Overall, total exports indicated a measured increase from 2012 to 2022: its volume increased at an average annual rate of +2.2% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports decreased by -6.6% against 2020 indices. The pace of growth was the most pronounced in 2014 with an increase of 118%. The exports peaked at X tons in 2020; however, from 2021 to 2022, the exports remained at a lower figure.

In value terms, orthopaedic appliances exports surged to $X in 2022. Over the period under review, exports showed buoyant growth. The pace of growth was the most pronounced in 2014 with an increase of 60% against the previous year. The exports peaked at $X in 2020; afterwards, it flattened through to 2022.

Exports by Country

The United States (X tons) was the main destination for orthopaedic appliances exports from Australia, accounting for a 59% share of total exports. Moreover, orthopaedic appliances exports to the United States exceeded the volume sent to the second major destination, the Netherlands (X tons), fivefold. The third position in this ranking was taken by New Zealand (X tons), with a 7.6% share.

From 2012 to 2022, the average annual growth rate of volume to the United States amounted to +20.3%. Exports to the other major destinations recorded the following average annual rates of exports growth: the Netherlands (+118.0% per year) and New Zealand (-17.3% per year).

In value terms, the United States ($X) remains the key foreign market for orthopaedic appliances and splints exports from Australia, comprising 59% of total exports. The second position in the ranking was held by the Netherlands ($X), with a 12% share of total exports. It was followed by New Zealand, with a 7.6% share.

From 2012 to 2022, the average annual growth rate of value to the United States totaled +15.5%. Exports to the other major destinations recorded the following average annual rates of exports growth: the Netherlands (+102.1% per year) and New Zealand (-6.1% per year).

Export Prices by Country

The average orthopaedic appliances export price stood at $X per ton in 2022, surging by 4.9% against the previous year. In general, the export price recorded a remarkable increase. The pace of growth was the most pronounced in 2013 an increase of 89% against the previous year. Over the period under review, the average export prices attained the maximum in 2022 and is likely to see steady growth in the near future.

Average prices varied noticeably for the major external markets. In 2022, amid the top suppliers, the highest price was recorded for prices to Malaysia ($X per ton) and Switzerland ($X per ton), while the average price for exports to Germany ($X per ton) and New Zealand ($X per ton) were amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Malaysia (+32.2%), while the prices for the other major destinations experienced more modest paces of growth.

Orthopaedic Appliances Imports

Imports into Australia

For the third year in a row, Australia recorded growth in supplies from abroad of orthopaedic appliances and splints, which increased by 6.6% to X tons in 2022. The total import volume increased at an average annual rate of +2.5% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2013 when imports increased by 31% against the previous year. As a result, imports reached the peak of X tons. From 2014 to 2022, the growth of imports remained at a lower figure.

In value terms, orthopaedic appliances imports contracted to $X in 2022. Over the period under review, total imports indicated a measured expansion from 2012 to 2022: its value increased at an average annual rate of +4.4% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by +7.7% against 2019 indices. The growth pace was the most rapid in 2013 with an increase of 19%. Imports peaked at $X in 2021, and then dropped in the following year.

Imports by Country

In 2022, Vietnam (X tons) constituted the largest supplier of orthopaedic appliances to Australia, accounting for a 60% share of total imports. Moreover, orthopaedic appliances imports from Vietnam exceeded the figures recorded by the second-largest supplier, China (X tons), twofold. The third position in this ranking was held by Mexico (X tons), with a 5% share.

From 2012 to 2022, the average annual rate of growth in terms of volume from Vietnam stood at +36.3%. The remaining supplying countries recorded the following average annual rates of imports growth: China (-5.3% per year) and Mexico (+7.3% per year).

In value terms, the United States ($X) constituted the largest supplier of orthopaedic appliances and splints to Australia, comprising 38% of total imports. The second position in the ranking was taken by Switzerland ($X), with an 18% share of total imports. It was followed by China, with a 16% share.

From 2012 to 2022, the average annual rate of growth in terms of value from the United States was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Switzerland (+1.3% per year) and China (+21.3% per year).

Import Prices by Country

The average orthopaedic appliances import price stood at $X per ton in 2022, waning by -18.6% against the previous year. In general, import price indicated slight growth from 2012 to 2022: its price increased at an average annual rate of +1.8% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, orthopaedic appliances import price decreased by -22.3% against 2019 indices. The pace of growth was the most pronounced in 2016 an increase of 23% against the previous year. The import price peaked at $X per ton in 2019; however, from 2020 to 2022, import prices stood at a somewhat lower figure.

Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was the United States ($X per ton), while the price for Vietnam ($X per ton) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (+28.0%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The country with the largest volume of orthopaedic appliances consumption was the United States, comprising approx. 49% of total volume. Moreover, orthopaedic appliances consumption in the United States exceeded the figures recorded by the second-largest consumer, China, fivefold. The third position in this ranking was occupied by India, with a 5.4% share.
The country with the largest volume of orthopaedic appliances production was China, accounting for 38% of total volume. Moreover, orthopaedic appliances production in China exceeded the figures recorded by the second-largest producer, India, fourfold. The United States ranked third in terms of total production with a 5.5% share.
In value terms, the United States constituted the largest supplier of orthopaedic appliances to Australia, comprising 40% of total imports. The second position in the ranking was occupied by China, with a 13% share of total imports. It was followed by Mexico, with a 6.2% share.
In value terms, the largest markets for orthopaedic appliances exported from Australia were the United States, New Zealand and Switzerland, together comprising 67% of total exports. These countries were followed by the Netherlands and Vietnam, which together accounted for a further 14%.
The average orthopaedic appliances export price stood at $406,332 per ton in 2021, falling by -10.5% against the previous year.
In 2021, the average orthopaedic appliances import price amounted to $168,008 per ton, which is down by -8.7% against the previous year.

This report provides an in-depth analysis of the orthopaedic appliances market in Australia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 32502239 - Orthopaedic appliances, splints and other fracture appliances

Country coverage:

  • Australia

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Trade (exports and imports) in Australia
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. MARKET STRUCTURE
    3. TRADE BALANCE
    4. PER CAPITA CONSUMPTION
    5. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
  8. 8. IMPORTS

    The Largest Import Supplying Countries

    1. IMPORTS FROM 2012–2024
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Destinations for Exports

    1. EXPORTS FROM 2012–2024
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. LIST OF TABLES

    1. Key Findings In 2024
    2. Market Volume, In Physical Terms, 2012–2024
    3. Market Value, 2012–2024
    4. Per Capita Consumption In 2012-2024
    5. Imports, In Physical Terms, By Country, 2012–2024
    6. Imports, In Value Terms, By Country, 2012–2024
    7. Import Prices, By Country Of Origin, 2012–2024
    8. Exports, In Physical Terms, By Country, 2012–2024
    9. Exports, In Value Terms, By Country, 2012–2024
    10. Export Prices, By Country Of Destination, 2012–2024
  12. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2024
    2. Market Value, 2012–2024
    3. Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2024
    4. Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2024
    5. Trade Balance, In Physical Terms, 2012-2024
    6. Trade Balance, In Value Terms, 2012-2024
    7. Per Capita Consumption, 2012-2024
    8. Market Volume Forecast to 2030
    9. Market Value Forecast to 2030
    10. Products: Market Size And Growth, By Type
    11. Products: Average Per Capita Consumption, By Type
    12. Products: Exports And Growth, By Type
    13. Products: Export Prices And Growth, By Type
    14. Production Volume And Growth
    15. Exports And Growth
    16. Export Prices And Growth
    17. Market Size And Growth
    18. Per Capita Consumption
    19. Imports And Growth
    20. Import Prices
    21. Production, In Physical Terms, 2012–2024
    22. Production, In Value Terms, 2012–2024
    23. Imports, In Physical Terms, 2012–2024
    24. Imports, In Value Terms, 2012–2024
    25. Imports, In Physical Terms, By Country, 2024
    26. Imports, In Physical Terms, By Country, 2012–2024
    27. Imports, In Value Terms, By Country, 2012–2024
    28. Import Prices, By Country Of Origin, 2012–2024
    29. Exports, In Physical Terms, 2012–2024
    30. Exports, In Value Terms, 2012–2024
    31. Exports, In Physical Terms, By Country, 2024
    32. Exports, In Physical Terms, By Country, 2012–2024
    33. Exports, In Value Terms, By Country, 2012–2024
    34. Export Prices, By Country Of Destination, 2012–2024

Recommended reports

Free Data: Orthopaedic Appliances And Splints - Australia