Central Asia - Plastic Plates, Sheets, Film, Foil and Strip - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCentral Asia: Market for Plastic Plates, Sheets, Film, Foil And Strip 2024
Market Size for Plastic Plates, Sheets, Film, Foil And Strip in Central Asia
In 2021, the Central Asian market for plastic plates, sheets, film, foil and strip increased by 16% to $X, rising for the fifth year in a row after three years of decline. The total consumption indicated a strong increase from 2012 to 2021: its value increased at an average annual rate of +6.7% over the last nine-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, consumption increased by +98.6% against 2016 indices. Over the period under review, the market reached the maximum level in 2021 and is likely to continue growth in the near future.
Production of Plastic Plates, Sheets, Film, Foil And Strip in Central Asia
In value terms, production of plastic plates, sheets, film, foil and strip contracted to $X in 2021 estimated in export price. The total production indicated a modest expansion from 2012 to 2021: its value increased at an average annual rate of +1.3% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, production increased by +21.5% against 2017 indices. The most prominent rate of growth was recorded in 2013 with an increase of 64% against the previous year. As a result, production reached the peak level of $X. From 2014 to 2021, production of growth remained at a lower figure.
Exports of Plastic Plates, Sheets, Film, Foil And Strip
Exports in Central Asia
For the seventh consecutive year, Central Asia recorded growth in overseas shipments of plastic plates, sheets, film, foil and strip, which increased by 37% to X tons in 2021. In general, exports posted significant growth. The pace of growth was the most pronounced in 2017 with an increase of 138%. The volume of export peaked in 2021 and is expected to retain growth in the near future.
In value terms, exports of plastic plates, sheets, film, foil and strip soared to $X in 2021. Overall, exports showed significant growth. The growth pace was the most rapid in 2019 when exports increased by 86% against the previous year. The level of export peaked in 2021 and is likely to see gradual growth in the near future.
Exports by Country
Turkmenistan represented the largest exporter of plastic plates, sheets, film, foil and strip in Central Asia, with the volume of exports recording X tons, which was near 54% of total exports in 2021. Uzbekistan (X tons) ranks second in terms of the total exports with a 21% share, followed by Kazakhstan (19%) and Kyrgyzstan (5.3%).
Exports from Turkmenistan increased at an average annual rate of +36.1% from 2012 to 2021. At the same time, Kyrgyzstan (+43.7%), Uzbekistan (+22.2%) and Kazakhstan (+17.3%) displayed positive paces of growth. Moreover, Kyrgyzstan emerged as the fastest-growing exporter exported in Central Asia, with a CAGR of +43.7% from 2012-2021. From 2012 to 2021, the share of Uzbekistan, Turkmenistan and Kyrgyzstan increased by +21, +15 and +2.9 percentage points, respectively.
In value terms, Turkmenistan ($X), Kazakhstan ($X) and Uzbekistan ($X) constituted the countries with the highest levels of exports in 2021, together accounting for 96% of total exports.
In terms of the main exporting countries, Uzbekistan, with a CAGR of +41.0%, recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2021, the export price in Central Asia amounted to $X per ton, with an increase of 12% against the previous year. Over the period under review, the export price, however, saw a pronounced contraction. The most prominent rate of growth was recorded in 2013 an increase of 27% against the previous year. As a result, the export price attained the peak level of $X per ton. From 2014 to 2021, the export prices failed to regain momentum.
There were significant differences in the average prices amongst the major exporting countries. In 2021, amid the top suppliers, the country with the highest price was Kazakhstan ($X per ton), while Turkmenistan ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Uzbekistan (+15.4%), while the other leaders experienced mixed trends in the export price figures.
Imports of Plastic Plates, Sheets, Film, Foil And Strip
Imports in Central Asia
Imports of plastic plates, sheets, film, foil and strip was estimated at X tons in 2021, growing by 12% compared with 2020. In general, imports enjoyed buoyant growth. The pace of growth was the most pronounced in 2017 with an increase of 79% against the previous year. The volume of import peaked in 2021 and is expected to retain growth in the near future.
In value terms, imports of plastic plates, sheets, film, foil and strip skyrocketed to $X in 2021. Overall, imports posted a buoyant expansion. The pace of growth was the most pronounced in 2017 when imports increased by 73%. The level of import peaked in 2021 and is expected to retain growth in years to come.
Imports by Country
In 2021, Kazakhstan (X tons) represented the key importer of plastic plates, sheets, film, foil and strip, constituting 50% of total imports. Uzbekistan (X tons) took the second position in the ranking, distantly followed by Kyrgyzstan (X tons) and Tajikistan (X tons). All these countries together held near 42% share of total imports. The following importers - Mongolia (X tons) and Turkmenistan (X tons) - together made up 7.9% of total imports.
From 2012 to 2021, the biggest increases were recorded for Uzbekistan (with a CAGR of +126.4%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Kazakhstan ($X), Uzbekistan ($X) and Kyrgyzstan ($X) were the countries with the highest levels of imports in 2021, with a combined 86% share of total imports.
Among the main importing countries, Uzbekistan, with a CAGR of +118.3%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2021, the import price in Central Asia amounted to $X per ton, with an increase of 17% against the previous year. Over the period under review, the import price, however, continues to indicate a slight curtailment. Over the period under review, import prices hit record highs at $X per ton in 2012; however, from 2013 to 2021, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2021, amid the top importers, the country with the highest price was Turkmenistan ($X per ton), while Kyrgyzstan ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Turkmenistan (+1.8%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Central Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22213010 - Other plates..., of polymers of ethylene, not reinforced, t hickness . 0,125 mm
- Prodcom 22213017 - Other plates..., of polymers of ethylene, not reinforced, etc., t hickness > 0,125 mm
- Prodcom 22213021 - Other plates..., of biaxially orientated polymers of propylene, t hickness . 0,10 mm
- Prodcom 22213023 - Other plates..., of polymers of propylene, thickness . 0,10 mm, others
- Prodcom 22213026 - Strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm but . .20 mm, of the kind used for packaging (excluding self-adhesive products)
- Prodcom 22213030 - Other plates..., of polymers of styrene, not reinforced, etc.
- Prodcom 22213035 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213036 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213037 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213038 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213053 - Plates..., of polymethyl methacrylate, not reinforced, etc.
- Prodcom 22213059 - Plates..., of other acrylic polymers, not reinforced, etc., n.e.c.
- Prodcom 22213061 - Plates, sheets, film, foil, strip of polycarbonates, non-cellular excluding floor, wall, ceiling coverings - self-adhesive, r einforced, laminated, supported/similarly combined with other materials
- Prodcom 22213063 - Plates..., of unsaturated polyesters, not reinforced, etc.
- Prodcom 22213065 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness . 0,35 mm
- Prodcom 22213067 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness > 0,35 mm
- Prodcom 22213069 - Plates, sheets, film, foil, strip of polyesters, non-cellular excluding floor, wall, ceiling coverings, self-adhesive - of polycarbonates, polyethylene terephthalate, unsaturated polyesters
- Prodcom 22213070 - Plates, sheets, film, foil and strip, of non-cellular cellulose or its chemical derivatives, not reinforced, laminated, supported or similarly combined with other materials (excluding selfadhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213082 - Plates, sheets, film, foil, strip of polyamides, non-cellular (excluding floor, wall, ceiling coverings, self-adhesive, r einforced, laminated, supported/similarly combined with other materials)
- Prodcom 22213086 - Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), amino-resins, phenolic resins or polymerisation products, not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213090 - Plates, sheets, film, foil and strip, of non-cellular plastics, n .e.c., not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products, floor, wall and ceiling coverings of HS
Country coverage:
- Kazakhstan
- Kyrgyzstan
- Mongolia
- Tajikistan
- Turkmenistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Central Asia, split by region and country
- Trade (exports and imports) in Central Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Kazakhstan
- Kyrgyzstan
- Mongolia
- Tajikistan
- Turkmenistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Asia.
This report provides an in-depth analysis of the global market for plastic plate, sheet, film, foil and strip.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the EU.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the U.S..
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in China.