Report China - Non-Upholstered Seats With Metal Frames - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update Nov 1, 2024

China - Non-Upholstered Seats With Metal Frames - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

China: Market for Non-Upholstered Seats With Metal Frames 2024

Market Size for Non-Upholstered Seats With Metal Frames in China

In 2021, the Chinese metal frame non-upholstered seat market decreased by -52% to $X for the first time since 2018, thus ending a two-year rising trend. In general, consumption showed a drastic downturn. As a result, consumption attained the peak level of $X. From 2018 to 2021, the growth of the market remained at a lower figure.

Production of Non-Upholstered Seats With Metal Frames in China

In value terms, metal frame non-upholstered seat production contracted slightly to $X in 2021 estimated in export price. The total output value increased at an average annual rate of +1.4% over the period from 2012 to 2021; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2018 with an increase of 40%. Over the period under review, production hit record highs at $X in 2020, and then fell in the following year.

Exports of Non-Upholstered Seats With Metal Frames

Exports from China

After two years of decline, shipments abroad of non-upholstered seats with metal frames increased by 26% to X units in 2021. Overall, exports recorded a pronounced increase. The pace of growth appeared the most rapid in 2018 when exports increased by 414% against the previous year. The exports peaked in 2021 and are expected to retain growth in the near future.

In value terms, metal frame non-upholstered seat exports skyrocketed to $X in 2021. The total export value increased at an average annual rate of +3.7% from 2012 to 2021; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, the exports attained the peak and are likely to continue growth in the immediate term.

Exports by Country

The United States (X units) was the main destination for metal frame non-upholstered seat exports from China, with a 41% share of total exports. Moreover, metal frame non-upholstered seat exports to the United States exceeded the volume sent to the second major destination, France (X units), sevenfold. Germany (X units) ranked third in terms of total exports with a 5.5% share.

From 2012 to 2021, the average annual rate of growth in terms of volume to the United States stood at +5.2%. Exports to the other major destinations recorded the following average annual rates of exports growth: France (+8.8% per year) and Germany (+3.7% per year).

In value terms, the United States ($X) remains the key foreign market for non-upholstered seats with metal frames exports from China, comprising 39% of total exports. The second position in the ranking was held by Germany ($X), with a 7% share of total exports. It was followed by France, with a 5.3% share.

From 2012 to 2021, the average annual rate of growth in terms of value to the United States totaled +4.9%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (+3.8% per year) and France (+6.3% per year).

Export Prices by Country

The average metal frame non-upholstered seat export price stood at $X per unit in 2021, growing by 12% against the previous year. Overall, the export price, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 when the average export price increased by 132% against the previous year. As a result, the export price attained the peak level of $X per unit. From 2018 to 2021, the average export prices failed to regain momentum.

Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was the Netherlands ($X per unit), while the average price for exports to Russia ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Japan (+3.2%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Non-Upholstered Seats With Metal Frames

Imports into China

In 2021, overseas purchases of non-upholstered seats with metal frames decreased by -24.6% to X units, falling for the third year in a row after two years of growth. In general, imports recorded a relatively flat trend pattern. The pace of growth appeared the most rapid in 2013 when imports increased by 47%. Over the period under review, imports hit record highs at X units in 2014; however, from 2015 to 2021, imports stood at a somewhat lower figure.

In value terms, metal frame non-upholstered seat imports skyrocketed to $X in 2021. Overall, total imports indicated resilient growth from 2012 to 2021: its value increased at an average annual rate of +8.8% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, imports decreased by -14.3% against 2018 indices. The pace of growth was the most pronounced in 2015 with an increase of 37%. Over the period under review, imports reached the maximum at $X in 2018; however, from 2019 to 2021, imports remained at a lower figure.

Imports by Country

In 2021, Vietnam (X units) constituted the largest supplier of metal frame non-upholstered seat to China, with a 24% share of total imports. Moreover, metal frame non-upholstered seat imports from Vietnam exceeded the figures recorded by the second-largest supplier, Indonesia (X units), ninefold. The third position in this ranking was held by India (X units), with a 1.8% share.

From 2012 to 2021, the average annual rate of growth in terms of volume from Vietnam amounted to +9.1%. The remaining supplying countries recorded the following average annual rates of imports growth: Indonesia (+33.3% per year) and India (+14.3% per year).

In value terms, Italy ($X), Vietnam ($X) and Germany ($X) constituted the largest metal frame non-upholstered seat suppliers to China, together comprising 42% of total imports. These countries were followed by Japan, Poland, Indonesia, Slovenia and India, which together accounted for a further 15%.

Among the main suppliers, Poland, with a CAGR of +51.7%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2021, the average metal frame non-upholstered seat import price amounted to $X per unit, increasing by 63% against the previous year. In general, the import price showed a resilient increase. The most prominent rate of growth was recorded in 2015 when the average import price increased by 74%. Over the period under review, average import prices hit record highs in 2021 and is expected to retain growth in the near future.

There were significant differences in the average prices amongst the major supplying countries. In 2021, amid the top importers, the country with the highest price was Italy ($X per unit), while the price for India ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Italy (+17.4%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The countries with the highest volumes of metal frame non-upholstered seat consumption in 2020 were China, the United States and India, with a combined 52% share of global consumption. These countries were followed by Germany, Indonesia, Bangladesh, Mexico, France, the UK, Vietnam and Canada, which together accounted for a further 25%.
China remains the largest metal frame non-upholstered seat producing country worldwide, accounting for 63% of total volume. Moreover, metal frame non-upholstered seat production in China exceeded the figures recorded by the second-largest producer, India, sixfold. The third position in this ranking was occupied by Indonesia, with a 4.3% share.
In value terms, the largest metal frame non-upholstered seat suppliers to China were Taiwan Chinese), Vietnam and the Czech Republic, together comprising 50% of total imports. These countries were followed by Japan and India, which together accounted for a further 4.8%.
In value terms, the United States remains the key foreign market for metal frame non-upholstered seat exports from China, comprising 41% of total exports. The second position in the ranking was occupied by Germany, with a 6.7% share of total exports. It was followed by France, with a 4.3% share.
The average metal frame non-upholstered seat export price stood at $13 per unit in 2020, remaining stable against the previous year.
In 2020, the average metal frame non-upholstered seat import price amounted to $20 per unit, which is down by -16.3% against the previous year.

This report provides an in-depth analysis of the market for metal frame non-upholstered seat in China. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 31001190 - Non-upholstered seats with metal frames (excluding medical, s urgical, dental or veterinary seats, barbers

Country coverage:

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Trade (exports and imports) in China
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. MARKET STRUCTURE
    3. TRADE BALANCE
    4. PER CAPITA CONSUMPTION
    5. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
  8. 8. IMPORTS

    The Largest Import Supplying Countries

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Destinations for Exports

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption In 2012-2023
    5. Imports, In Physical Terms, By Country, 2012–2023
    6. Imports, In Value Terms, By Country, 2012–2023
    7. Import Prices, By Country Of Origin, 2012–2023
    8. Exports, In Physical Terms, By Country, 2012–2023
    9. Exports, In Value Terms, By Country, 2012–2023
    10. Export Prices, By Country Of Destination, 2012–2023
  12. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
    4. Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
    5. Trade Balance, In Physical Terms, 2012-2023
    6. Trade Balance, In Value Terms, 2012-2023
    7. Per Capita Consumption, 2012-2023
    8. Market Volume Forecast to 2030
    9. Market Value Forecast to 2030
    10. Products: Market Size And Growth, By Type
    11. Products: Average Per Capita Consumption, By Type
    12. Products: Exports And Growth, By Type
    13. Products: Export Prices And Growth, By Type
    14. Production Volume And Growth
    15. Exports And Growth
    16. Export Prices And Growth
    17. Market Size And Growth
    18. Per Capita Consumption
    19. Imports And Growth
    20. Import Prices
    21. Production, In Physical Terms, 2012–2023
    22. Production, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, 2012–2023
    24. Imports, In Value Terms, 2012–2023
    25. Imports, In Physical Terms, By Country, 2023
    26. Imports, In Physical Terms, By Country, 2012–2023
    27. Imports, In Value Terms, By Country, 2012–2023
    28. Import Prices, By Country Of Origin, 2012–2023
    29. Exports, In Physical Terms, 2012–2023
    30. Exports, In Value Terms, 2012–2023
    31. Exports, In Physical Terms, By Country, 2023
    32. Exports, In Physical Terms, By Country, 2012–2023
    33. Exports, In Value Terms, By Country, 2012–2023
    34. Export Prices, By Country Of Destination, 2012–2023

Recommended reports

Free Data: Non-Upholstered Seats With Metal Frames - China