
CIS - Nails, Tacks, Staples, Screws and Bolts - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCIS: Nail And Bolt Market 2025
Nail And Bolt Market Size in CIS
The CIS nail and bolt market expanded significantly to $X in 2021, picking up by 14% against the previous year. The market value increased at an average annual rate of +3.2% from 2012 to 2021; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Over the period under review, the market hit record highs in 2021 and is expected to retain growth in the immediate term.
Nail And Bolt Production in CIS
In value terms, nail and bolt production rose to $X in 2021 estimated in export price. The total output value increased at an average annual rate of +1.6% from 2012 to 2021; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2017 with an increase of 27%. Over the period under review, production attained the peak level at $X in 2019; however, from 2020 to 2021, production remained at a lower figure.
Nail And Bolt Exports
Exports in CIS
In 2021, shipments abroad of nails, tacks, staples, screws and bolts increased by 19% to X tons, rising for the second year in a row after four years of decline. Over the period under review, exports showed a relatively flat trend pattern. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
In value terms, nail and bolt exports skyrocketed to $X in 2021. Total exports indicated measured growth from 2012 to 2021: its value increased at an average annual rate of +4.0% over the last nine-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, exports increased by +35.7% against 2018 indices. As a result, the exports attained the peak and are likely to continue growth in the immediate term.
Exports by Country
Russia (X tons) and Belarus (X tons) dominates exports structure, together achieving 95% of total exports. Azerbaijan (X tons) and Uzbekistan (X tons) followed a long way behind the leaders.
From 2012 to 2021, the most notable rate of growth in terms of shipments, amongst the main exporting countries, was attained by Azerbaijan (with a CAGR of +115.6%), while the other leaders experienced more modest paces of growth.
In value terms, Russia ($X), Belarus ($X) and Azerbaijan ($X) constituted the countries with the highest levels of exports in 2021, with a combined 97% share of total exports.
Azerbaijan, with a CAGR of +104.1%, saw the highest growth rate of the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2021, the export price in the CIS amounted to $X per ton, jumping by 19% against the previous year. Export price indicated a noticeable increase from 2012 to 2021: its price increased at an average annual rate of +3.6% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2017 when the export price increased by 45%. The level of export peaked in 2021 and is expected to retain growth in years to come.
There were significant differences in the average prices amongst the major exporting countries. In 2021, amid the top suppliers, the country with the highest price was Azerbaijan ($X per ton), while Russia ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Belarus (+7.2%), while the other leaders experienced a decline in the export price figures.
Nail And Bolt Imports
Imports in CIS
In 2021, approx. X tons of nails, tacks, staples, screws and bolts were imported in the CIS; increasing by 9.7% against 2020 figures. The total import volume increased at an average annual rate of +1.3% over the period from 2012 to 2021; the trend pattern remained consistent, with only minor fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2017 with an increase of 11% against the previous year. Over the period under review, imports attained the peak figure in 2021 and are likely to continue growth in the immediate term.
In value terms, nail and bolt imports soared to $X in 2021. Total imports indicated notable growth from 2012 to 2021: its value increased at an average annual rate of +3.9% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, imports reached the peak and are likely to continue growth in the immediate term.
Imports by Country
In 2021, Russia (X tons) was the largest importer of nails, tacks, staples, screws and bolts, constituting 78% of total imports. It was distantly followed by Kazakhstan (X tons), constituting a 10% share of total imports. Uzbekistan (X tons), Belarus (X tons), Azerbaijan (X tons) and Kyrgyzstan (X tons) followed a long way behind the leaders.
From 2012 to 2021, average annual rates of growth with regard to nail and bolt imports into Russia stood at +1.5%. At the same time, Uzbekistan (+15.0%) and Kyrgyzstan (+1.3%) displayed positive paces of growth. Moreover, Uzbekistan emerged as the fastest-growing importer imported in the CIS, with a CAGR of +15.0% from 2012-2021. Kazakhstan experienced a relatively flat trend pattern. By contrast, Azerbaijan (-1.2%) and Belarus (-3.9%) illustrated a downward trend over the same period. Uzbekistan (+3.2 p.p.) significantly strengthened its position in terms of the total imports, while Belarus saw its share reduced by -1.5% from 2012 to 2021, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Russia ($X) constitutes the largest market for imported nails, tacks, staples, screws and bolts in the CIS, comprising 78% of total imports. The second position in the ranking was held by Kazakhstan ($X), with an 8.7% share of total imports. It was followed by Belarus, with a 5.2% share.
In Russia, nail and bolt imports increased at an average annual rate of +4.2% over the period from 2012-2021. In the other countries, the average annual rates were as follows: Kazakhstan (+1.2% per year) and Belarus (+1.6% per year).
Import Prices by Country
The import price in the CIS stood at $X per ton in 2021, picking up by 17% against the previous year. Over the period from 2012 to 2021, it increased at an average annual rate of +2.5%. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major importing countries. In 2021, amid the top importers, the country with the highest price was Belarus ($X per ton), while Kyrgyzstan ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Uzbekistan (+12.6%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the nail and bolt market in CIS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25931410 -
- Prodcom 25931480 -
- Prodcom 25941113 - Screws, turned from bars, rods, profiles, or wire, of a shank thickness . 6 mm
- Prodcom 25941115 - Other screws and bolts for fixing railway truck construction material, iron or steel
- Prodcom 25941117 - Screws and bolts without heads in steel
- Prodcom 25941123 - Slotted and cross-recessed screws of stainless steel
- Prodcom 25941125 - Other screws and bolts with heads
- Prodcom 25941127 - Hexagon socket head screws of stainless steel
- Prodcom 25941129 - Other hexagon socket head screws
- Prodcom 25941131 - Stainless steel hexagon bolts with heads
- Prodcom 25941133 - Iron or steel hexagon bolts with heads, with a tensile strength < .800 MPa (excluding of stainless steel)
- Prodcom 25941135 - Iron or steel hexagon bolts with heads, with a tensile strength. .800 MPa (excluding of stainless steel)
- Prodcom 25941139 - Iron or steel bolts with heads (excluding hexagon bolts)
- Prodcom 25941153 - Iron or steel wood screws
- Prodcom 25941157 - Iron or steel screw hooks and screw rings
- Prodcom 25941173 - Stainless steel self-tapping screws (excluding threaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941175 - Iron or steel self-tapping screws (excluding of stainless steel, t hreaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941183 - Iron or steel nuts turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm
- Prodcom 25941185 - Stainless steel nuts (excluding those turned from bars, rods, p rofiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941187 - Iron or steel nuts (including self-locking nuts) (excluding of stainless steel, turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941190 - Threaded articles, n.e.c., of iron or steel
- Prodcom 25941210 - Iron or steel spring washers and other lock washers
- Prodcom 25941230 - Iron or steel washers (excluding spring washers and other lock washers)
- Prodcom 25941250 - Iron or steel rivets (including partly hollow rivets) (excluding tubular or bifurcated rivets for all purposes)
- Prodcom 25941270 - Iron or steel cotters and cotter-pins and similar non-threaded articles (excluding washers, rivets)
- Prodcom 25941310 - Washers, rivets, cotters, cotter pins and the like, not threaded, of copper
- Prodcom 25941340 - Copper screws, bolts and nuts (excluding pointed screw nails, s crew stoppers, threaded mechanisms used to transmit motion/to act as active machinery part, screw hooks, rings)
- Prodcom 25941370 - Threaded articles of copper, n.e.c.
Country coverage:
- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in CIS, split by region and country
- Trade (exports and imports) in CIS
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption, By Country, 2018–2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Destination, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Origin, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Consumption, By Country, 2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Production, By Country, 2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, 2012–2024
Recommended reports
This report provides an in-depth analysis of the nail and bolt market in Asia.
This report provides an in-depth analysis of the global nail and bolt market.
This report provides an in-depth analysis of the nail and bolt market in the EU.
This report provides an in-depth analysis of the nail and bolt market in the U.S..
This report provides an in-depth analysis of the nail and bolt market in China.
- Nail and Bolt Market
- Aluminium Window and Door Market
- Sanitary Alluminium Ware Market
- Plastic Floor Market
- Marble Building Stone Market
- Central Heating Boilers Market
- Cement Prefabricated Structural Components Market
- Float Glass and Surface Ground or Polished Glass Market
- Wooden Window Market
- Wooden Door Market