CIS - Tubes, Pipes and Hollow Profiles (Of Iron or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCIS: Market for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) 2025
Market Size for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in CIS
The CIS market for tubes, pipes and hollow profiles (of iron or steel) stood at $X in 2021, increasing by 1.7% against the previous year. Over the period under review, consumption saw a slight slump. As a result, consumption reached the peak level of $X. From 2014 to 2021, the growth of the market remained at a somewhat lower figure.
Production of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in CIS
In value terms, production of tubes, pipes and hollow profiles (of iron or steel) totaled $X in 2021 estimated in export price. Over the period under review, production continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 when the production volume increased by 32%. The level of production peaked at $X in 2013; however, from 2014 to 2021, production remained at a lower figure.
Exports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Exports in CIS
In 2021, shipments abroad of tubes, pipes and hollow profiles (of iron or steel) decreased by -2.5% to X tons, falling for the third consecutive year after three years of growth. Total exports indicated a notable expansion from 2012 to 2021: its volume increased at an average annual rate of +2.3% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, exports decreased by -24.7% against 2018 indices. The most prominent rate of growth was recorded in 2017 when exports increased by 57%. The volume of export peaked at X tons in 2018; however, from 2019 to 2021, the exports failed to regain momentum.
In value terms, exports of tubes, pipes and hollow profiles (of iron or steel) rose notably to $X in 2021. Total exports indicated a mild increase from 2012 to 2021: its value increased at an average annual rate of +1.4% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, exports decreased by -22.1% against 2018 indices. The pace of growth appeared the most rapid in 2017 when exports increased by 98% against the previous year. The level of export peaked at $X in 2018; however, from 2019 to 2021, the exports stood at a somewhat lower figure.
Exports by Country
Russia represented the major exporter of tubes, pipes and hollow profiles (of iron or steel) in the CIS, with the volume of exports resulting at X tons, which was near 81% of total exports in 2021. It was distantly followed by Belarus (X tons) and Kazakhstan (X tons), together committing a 17% share of total exports.
From 2012 to 2021, average annual rates of growth with regard to iron or steel pipe and tube exports from Russia stood at +2.0%. At the same time, Kazakhstan (+24.0%) and Belarus (+1.1%) displayed positive paces of growth. Moreover, Kazakhstan emerged as the fastest-growing exporter exported in the CIS, with a CAGR of +24.0% from 2012-2021. Kazakhstan (+5.3 p.p.) significantly strengthened its position in terms of the total exports, while Russia saw its share reduced by -2.6% from 2012 to 2021, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Russia ($X) remains the largest iron or steel pipe and tube supplier in the CIS, comprising 83% of total exports. The second position in the ranking was taken by Belarus ($X), with a 10% share of total exports.
In Russia, exports of tubes, pipes and hollow profiles (of iron or steel) remained relatively stable over the period from 2012-2021. The remaining exporting countries recorded the following average annual rates of exports growth: Belarus (+2.6% per year) and Kazakhstan (+19.7% per year).
Export Prices by Country
In 2021, the export price in the CIS amounted to $X per ton, with an increase of 16% against the previous year. Overall, the export price, however, continues to indicate a relatively flat trend pattern. The growth pace was the most rapid in 2017 when the export price increased by 26% against the previous year. Over the period under review, the export prices hit record highs at $X per ton in 2013; however, from 2014 to 2021, the export prices remained at a lower figure.
Average prices varied somewhat amongst the major exporting countries. In 2021, amid the top suppliers, the country with the highest price was Russia ($X per ton), while Kazakhstan ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Belarus (+1.6%), while the other leaders experienced a decline in the export price figures.
Imports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Imports in CIS
In 2021, purchases abroad of tubes, pipes and hollow profiles (of iron or steel) decreased by -7.1% to X tons, falling for the second consecutive year after three years of growth. Overall, imports continue to indicate a perceptible descent. The most prominent rate of growth was recorded in 2013 with an increase of 22%. As a result, imports attained the peak of X tons. From 2014 to 2021, the growth of imports of remained at a somewhat lower figure.
In value terms, imports of tubes, pipes and hollow profiles (of iron or steel) reached $X in 2021. In general, imports continue to indicate a drastic downturn. The pace of growth was the most pronounced in 2018 when imports increased by 21%. Over the period under review, imports of reached the peak figure at $X in 2013; however, from 2014 to 2021, imports stood at a somewhat lower figure.
Imports by Country
Kazakhstan (X tons), Russia (X tons), Belarus (X tons) and Uzbekistan (X tons) represented roughly 86% of total imports in 2021. It was distantly followed by Azerbaijan (X tons), mixing up a 7.5% share of total imports. The following importers - Kyrgyzstan (X tons) and Armenia (X tons) - each amounted to a 4.1% share of total imports.
From 2012 to 2021, the biggest increases were recorded for Uzbekistan (with a CAGR of +29.2%), while purchases for the other leaders experienced mixed trends in the imports figures.
In value terms, Russia ($X), Kazakhstan ($X) and Uzbekistan ($X) constituted the countries with the highest levels of imports in 2021, together accounting for 72% of total imports.
Among the main importing countries, Uzbekistan, with a CAGR of +27.7%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced mixed trends in the imports figures.
Import Prices by Country
In 2021, the import price in the CIS amounted to $X per ton, rising by 14% against the previous year. Over the period under review, the import price, however, recorded a pronounced reduction. The level of import peaked at $X per ton in 2012; however, from 2013 to 2021, import prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Russia ($X per ton), while Kyrgyzstan ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Russia (+1.0%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron or steel pipe and tube in CIS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24201110 - Line pipe, of a kind used for oil or gas pipelines, seamless, of stainless steel
- Prodcom 24201150 - Line pipe, of a kind used for oil or gas pipelines, seamless, of steel other than stainless steel
- Prodcom 24201210 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of stainless steel
- Prodcom 24201250 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of steel other than stainless steel
- Prodcom 24201310 - Tubes and pipes, of circular cross-section, seamless, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill pipe used for oil or gas drilling)
- Prodcom 24201330 - Precision tubes and pipes, of circular cross-section, colddrawn or cold-rolled, seamless, of steel other than stainless steel
- Prodcom 24201350 - Tubes and pipes, of circular cross-section, cold-drawn or coldrolled, s eamless, of steel other than stainless steel (excluding precision tubes and pipes)
- Prodcom 24201370 - Tubes and pipes, of circular cross-section, hot-finished, s eamless, of steel other than stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill-pipe used for oil or gas drilling)
- Prodcom 24201400 - Tubes and pipes, of non-circular cross-section, seamless, a nd hollow profiles, seamless, of steel
- Prodcom 24202110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202150 - Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202200 - Casing, of a kind used in drilling for oil or gas, welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202300 - Tubes and pipes, welded, of an external diameter > .406,4 mm, of steel (excluding line pipe of a kind used for oil or gas pipelines and casing used for oil or gas drilling)
- Prodcom 24202400 - Tubes and pipes, riveted or similarly closed, of an external diameter > .406,4 mm, of steel (excluding line pipe for oil and gas pipelines, casing used for oil or gas drilling and welded tubes and pipes)
- Prodcom 24203110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203150 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203210 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203250 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203310 - Tubes and pipes, of circular cross-section, welded, of an external diameter . .406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing used for oil or gas drilling)
- Prodcom 24203340 - Precision tubes and pipes, of circular cross-section, welded, o f an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203370 - Tubes and pipes, of circular cross-section, hot- or coldformed and welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203410 - Tubes and pipes, of non-circular cross-section, hot- or coldformed and welded, of stainless steel
- Prodcom 24203430 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness . 2 mm, hotor cold-formed and welded, of steel other than stainless steel
- Prodcom 24203450 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness > 2 mm, hot-or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203470 - Tubes and pipes, of other non-circular cross-section than square or rectangular, hot- or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203500 - Tubes and pipes, open seam, riveted or similarly closed, of steel (excluding line pipe for oil and gas pipelines, casing and tubing used for oil or gas drilling and other welded tubes and pipes)
- Prodcom 24512000 - Tubes, pipes and hollow profiles of cast iron excluding tubes, p ipes, hollow profiles made into identifiable parts of articles, s uch as sections of central heating radiators and machinery parts
Country coverage:
- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in CIS, split by region and country
- Trade (exports and imports) in CIS
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption, By Country, 2018–2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Destination, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Origin, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Consumption, By Country, 2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Production, By Country, 2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, 2012–2024
Recommended reports
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Asia.
This report provides an in-depth analysis of the global market for iron or steel pipe and tube.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the EU.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the U.S..
This report provides an in-depth analysis of the market for iron or steel pipe and tube in China.