Czech Republic: Injection-Moulding Machine Market 2025

Injection-Moulding Machine Market Size in the Czech Republic

The Czech injection-moulding machine market surged to $X in 2022, growing by 49% against the previous year. Overall, consumption enjoyed a buoyant increase. Injection-moulding machine consumption peaked at $X in 2017; however, from 2018 to 2022, consumption stood at a somewhat lower figure.

Injection-Moulding Machine Production in the Czech Republic

In value terms, injection-moulding machine production skyrocketed to $X in 2022 estimated in export price. Over the period under review, production enjoyed a resilient increase. The most prominent rate of growth was recorded in 2020 when the production volume increased by 161%. As a result, production attained the peak level of $X. From 2021 to 2022, production growth remained at a somewhat lower figure.

Injection-Moulding Machine Exports

Exports from the Czech Republic

In 2022, injection-moulding machine exports from the Czech Republic shrank sharply to X units, which is down by -33.6% compared with the previous year. Overall, exports, however, continue to indicate buoyant growth. The most prominent rate of growth was recorded in 2021 when exports increased by 192%. As a result, the exports attained the peak of X units, and then declined dramatically in the following year.

In value terms, injection-moulding machine exports declined dramatically to $X in 2022. Over the period under review, exports, however, recorded a prominent expansion. The most prominent rate of growth was recorded in 2015 when exports increased by 127%. Over the period under review, the exports attained the maximum at $X in 2021, and then fell remarkably in the following year.

Exports by Country

Poland (X units) was the main destination for injection-moulding machine exports from the Czech Republic, with a 64% share of total exports. Moreover, injection-moulding machine exports to Poland exceeded the volume sent to the second major destination, Italy (X units), fivefold. The third position in this ranking was taken by the UK (X units), with an 11% share.

From 2012 to 2022, the average annual rate of growth in terms of volume to Poland amounted to +35.6%. Exports to the other major destinations recorded the following average annual rates of exports growth: Italy (+2.2% per year) and the UK (+65.4% per year).

In value terms, Italy ($X), Poland ($X) and the UK ($X) were the largest markets for injection-moulding machine exported from the Czech Republic worldwide, together accounting for 82% of total exports.

Among the main countries of destination, the UK, with a CAGR of +57.9%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

In 2022, the average injection-moulding machine export price amounted to $X per unit, picking up by 13% against the previous year. Over the period under review, the export price, however, saw a abrupt contraction. The growth pace was the most rapid in 2016 an increase of 14%. Over the period under review, the average export prices reached the maximum at $X per unit in 2017; however, from 2018 to 2022, the export prices remained at a lower figure.

There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was Italy ($X per unit), while the average price for exports to Poland ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Italy (+4.4%), while the prices for the other major destinations experienced mixed trend patterns.

Injection-Moulding Machine Imports

Imports into the Czech Republic

In 2022, supplies from abroad of injection-moulding machines for working rubber or plastics increased by 4.6% to X units, rising for the second consecutive year after four years of decline. In general, imports saw a modest expansion. The pace of growth appeared the most rapid in 2014 when imports increased by 103% against the previous year. Imports peaked at X units in 2016; however, from 2017 to 2022, imports failed to regain momentum.

In value terms, injection-moulding machine imports shrank to $X in 2022. Over the period under review, total imports indicated a slight increase from 2012 to 2022: its value increased at an average annual rate of +1.3% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by +15.1% against 2020 indices. The pace of growth was the most pronounced in 2014 when imports increased by 66%. Imports peaked at $X in 2017; however, from 2018 to 2022, imports failed to regain momentum.

Imports by Country

In 2022, Germany (X units) constituted the largest supplier of injection-moulding machine to the Czech Republic, with a 55% share of total imports. Moreover, injection-moulding machine imports from Germany exceeded the figures recorded by the second-largest supplier, Austria (X units), threefold. The third position in this ranking was held by China (X units), with an 8.9% share.

From 2012 to 2022, the average annual growth rate of volume from Germany was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Austria (+1.6% per year) and China (+13.8% per year).

In value terms, Germany ($X), Austria ($X) and China ($X) constituted the largest injection-moulding machine suppliers to the Czech Republic, together accounting for 85% of total imports. Switzerland, Japan and the UK lagged somewhat behind, together accounting for a further 8.7%.

Among the main suppliers, the UK, with a CAGR of +127.2%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The average injection-moulding machine import price stood at $X per unit in 2022, declining by -12.3% against the previous year. In general, the import price showed a relatively flat trend pattern. The growth pace was the most rapid in 2019 an increase of 26%. As a result, import price attained the peak level of $X per unit. From 2020 to 2022, the average import prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Austria ($X per unit), while the price for Switzerland ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the UK (+57.1%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :