Report EU - Machinery for Solid-Liquid Separation - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update Nov 1, 2024

EU - Machinery for Solid-Liquid Separation - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

EU: Solid-Liquid Separator Market 2024

Solid-Liquid Separator Market Size in the EU

In 2022, the EU solid-liquid separator market increased by less than 0.1% to $X, rising for the fifth consecutive year after five years of decline. The total consumption indicated a slight increase from 2012 to 2022: its value increased at an average annual rate of +1.7% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by +69.1% against 2017 indices. The level of consumption peaked in 2022 and is likely to continue growth in the near future.

Solid-Liquid Separator Production in the EU

In value terms, solid-liquid separator production fell to $X in 2022 estimated in export price. Over the period under review, production, however, showed a mild decrease. The most prominent rate of growth was recorded in 2018 with an increase of 32%. The level of production peaked at $X in 2014; however, from 2015 to 2022, production failed to regain momentum.

Solid-Liquid Separator Exports

Exports in the EU

For the third consecutive year, the European Union recorded growth in overseas shipments of machinery for solid-liquid separation, which increased by 1.5% to X units in 2022. The total export volume increased at an average annual rate of +1.7% over the period from 2012 to 2022; the trend pattern remained consistent, with only minor fluctuations being observed in certain years. The pace of growth appeared the most rapid in 2021 with an increase of 14%. The volume of export peaked in 2022 and is likely to see steady growth in years to come.

In value terms, solid-liquid separator exports rose sharply to $X in 2022. Total exports indicated resilient growth from 2012 to 2022: its value increased at an average annual rate of +5.2% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by +71.5% against 2015 indices. The most prominent rate of growth was recorded in 2021 with an increase of 22% against the previous year. Over the period under review, the exports reached the maximum in 2022 and are likely to see gradual growth in the near future.

Exports by Country

Germany was the main exporter of machinery for solid-liquid separation in the European Union, with the volume of exports resulting at X units, which was approx. 40% of total exports in 2022. Italy (X units) held the second position in the ranking, followed by France (X units) and Belgium (X units). All these countries together held near 39% share of total exports. The Netherlands (X units), Poland (X units), Romania (X units), the Czech Republic (X units), Denmark (X units) and Spain (X units) followed a long way behind the leaders.

Exports from Germany increased at an average annual rate of +2.8% from 2012 to 2022. At the same time, the Czech Republic (+11.1%), Poland (+7.3%), Italy (+3.8%), the Netherlands (+1.3%) and Romania (+1.1%) displayed positive paces of growth. Moreover, the Czech Republic emerged as the fastest-growing exporter exported in the European Union, with a CAGR of +11.1% from 2012-2022. France and Belgium experienced a relatively flat trend pattern. By contrast, Denmark (-1.9%) and Spain (-2.4%) illustrated a downward trend over the same period. From 2012 to 2022, the share of Germany and Italy increased by +4.2 and +3.2 percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Germany ($X) remains the largest solid-liquid separator supplier in the European Union, comprising 42% of total exports. The second position in the ranking was held by France ($X), with a 19% share of total exports. It was followed by Belgium, with a 12% share.

In Germany, solid-liquid separator exports expanded at an average annual rate of +4.4% over the period from 2012-2022. In the other countries, the average annual rates were as follows: France (+4.4% per year) and Belgium (+9.7% per year).

Export Prices by Country

The export price in the European Union stood at $X per unit in 2022, picking up by 8.8% against the previous year. Over the last decade, it increased at an average annual rate of +3.5%. The most prominent rate of growth was recorded in 2017 when the export price increased by 20%. Over the period under review, the export prices attained the peak figure in 2022 and is expected to retain growth in years to come.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was the Netherlands ($X per unit), while Romania (less than $X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Belgium (+10.4%), while the other leaders experienced more modest paces of growth.

Solid-Liquid Separator Imports

Imports in the EU

In 2022, the amount of machinery for solid-liquid separation imported in the European Union stood at X units, remaining stable against the year before. The total import volume increased at an average annual rate of +1.7% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of 19%. The volume of import peaked in 2022 and is likely to see steady growth in the near future.

In value terms, solid-liquid separator imports stood at $X in 2022. Overall, imports continue to indicate a strong expansion. The growth pace was the most rapid in 2021 when imports increased by 30% against the previous year. The level of import peaked in 2022 and is expected to retain growth in the immediate term.

Imports by Country

In 2022, Germany (X units), France (X units), Belgium (X units), Italy (X units) and Spain (X units) represented the main importer of machinery for solid-liquid separation in the European Union, creating 66% of total import. It was distantly followed by the Netherlands (X units), committing a 5.1% share of total imports. The Czech Republic (X units), Denmark (X units), Poland (X units), Hungary (X units), Austria (X units), Romania (X units) and Ireland (X units) followed a long way behind the leaders.

From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by Hungary (with a CAGR of +14.3%), while imports for the other leaders experienced more modest paces of growth.

In value terms, the largest solid-liquid separator importing markets in the European Union were France ($X), Germany ($X) and Belgium ($X), with a combined 52% share of total imports. These countries were followed by Ireland, the Netherlands, Italy, Spain, Denmark, Austria, Hungary, the Czech Republic, Poland and Romania, which together accounted for a further 41%.

Among the main importing countries, Ireland, with a CAGR of +26.7%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2022, the import price in the European Union amounted to $X per unit, picking up by 4.7% against the previous year. Import price indicated a resilient expansion from 2012 to 2022: its price increased at an average annual rate of +7.0% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, solid-liquid separator import price increased by +80.6% against 2015 indices. The most prominent rate of growth was recorded in 2020 an increase of 14%. Over the period under review, import prices hit record highs in 2022 and is expected to retain growth in years to come.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Ireland ($X per unit), while the Czech Republic ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Ireland (+26.7%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The countries with the highest volumes of in 2021 were France, Germany and Belgium, with a combined 42% share of total consumption.
The countries with the highest volumes of in 2021 were Germany, Italy and France, together accounting for 85% of total production.
In value terms, the largest solid-liquid separator supplying countries in the European Union were Germany, France and Belgium, with a combined 70% share of total exports. These countries were followed by Italy, the Netherlands, Poland and Romania, which together accounted for a further 18%.
In value terms, the largest solid-liquid separator importing markets in the European Union were France, Belgium and Germany, with a combined 55% share of total imports. These countries were followed by the Netherlands, Italy, Ireland, Spain, Denmark, Austria, Sweden, the Czech Republic, Poland and Romania, which together accounted for a further 39%.
In 2021, the export price in the European Union amounted to $8.2 per unit, increasing by 6.9% against the previous year.
In 2021, the import price in the European Union amounted to $8.1 per unit, picking up by 5.9% against the previous year.

This report provides an in-depth analysis of the solid-liquid separator market in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 28291270 - Machinery and apparatus for solid-liquid separation/ purification excluding for water and beverages, centrifuges and centrifugal dryers, oil/petrol filters for internal combustion engines

Country coverage:

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Production in the EU, split by region and country
  • Trade (exports and imports) in the EU
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. CONSUMPTION BY COUNTRY
    3. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
    2. PRODUCTION BY COUNTRY
  8. 8. IMPORTS

    The Largest Importers on The Market and How They Succeed

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Exporters on The Market and How They Succeed

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. 11. COUNTRY PROFILES

    The Largest Markets And Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
    • Austria
    • Belgium
    • Bulgaria
    • Croatia
    • Cyprus
    • Czech Republic
    • Denmark
    • Estonia
    • Finland
    • France
    • Germany
    • Greece
    • Hungary
    • Ireland
    • Italy
    • Latvia
    • Lithuania
    • Luxembourg
    • Malta
    • Netherlands
    • Poland
    • Portugal
    • Romania
    • Slovakia
    • Slovenia
    • Spain
    • Sweden
  12. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption, By Country, 2018–2023
    5. Production, In Physical Terms, By Country, 2012–2023
    6. Imports, In Physical Terms, By Country, 2012–2023
    7. Imports, In Value Terms, By Country, 2012–2023
    8. Import Prices, By Country Of Destination, 2012–2023
    9. Exports, In Physical Terms, By Country, 2012–2023
    10. Exports, In Value Terms, By Country, 2012–2023
    11. Export Prices, By Country Of Origin, 2012–2023
  13. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Consumption, By Country, 2023
    4. Market Volume Forecast to 2030
    5. Market Value Forecast to 2030
    6. Products: Market Size And Growth, By Type
    7. Products: Average Per Capita Consumption, By Type
    8. Products: Exports And Growth, By Type
    9. Products: Export Prices And Growth, By Type
    10. Production Volume And Growth
    11. Exports And Growth
    12. Export Prices And Growth
    13. Market Size And Growth
    14. Per Capita Consumption
    15. Imports And Growth
    16. Import Prices
    17. Production, In Physical Terms, 2012–2023
    18. Production, In Value Terms, 2012–2023
    19. Production, By Country, 2023
    20. Production, In Physical Terms, By Country, 2012–2023
    21. Imports, In Physical Terms, 2012–2023
    22. Imports, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, By Country, 2023
    24. Imports, In Physical Terms, By Country, 2012–2023
    25. Imports, In Value Terms, By Country, 2012–2023
    26. Import Prices, By Country, 2012–2023
    27. Exports, In Physical Terms, 2012–2023
    28. Exports, In Value Terms, 2012–2023
    29. Exports, In Physical Terms, By Country, 2023
    30. Exports, In Physical Terms, By Country, 2012–2023
    31. Exports, In Value Terms, By Country, 2012–2023
    32. Export Prices, 2012–2023

Recommended reports

Free Data: Machinery For Solid-Liquid Separation - European Union