EU: Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2025

Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in the EU

The EU market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids skyrocketed to $X in 2022, with an increase of 154% against the previous year. Overall, consumption continues to indicate a resilient increase. As a result, consumption attained the peak level and is likely to continue growth in the immediate term.

Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in the EU

In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids contracted slightly to $X in 2022 estimated in export price. Overall, production, however, recorded a pronounced shrinkage. The pace of growth was the most pronounced in 2017 with an increase of 9.1%. The level of production peaked at $X in 2013; however, from 2014 to 2022, production remained at a lower figure.

Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Exports in the EU

In 2022, overseas shipments of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids increased by 13% to X units, rising for the second consecutive year after two years of decline. The total export volume increased at an average annual rate of +3.4% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 with an increase of 25% against the previous year. Over the period under review, the exports of hit record highs in 2022 and are expected to retain growth in the near future.

In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids declined to $X in 2022. Over the period under review, exports, however, recorded a pronounced decline. The most prominent rate of growth was recorded in 2021 when exports increased by 21% against the previous year. Over the period under review, the exports of reached the peak figure at $X in 2013; however, from 2014 to 2022, the exports remained at a lower figure.

Exports by Country

Italy was the largest exporter of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the European Union, with the volume of exports reaching X units, which was near 45% of total exports in 2022. Germany (X units) took an 18% share (based on physical terms) of total exports, which put it in second place, followed by the Netherlands (9.4%) and Spain (5.7%). Portugal (X units), Poland (X units), Denmark (X units), Slovenia (X units), Finland (X units) and France (X units) held a relatively small share of total exports.

Exports from Italy increased at an average annual rate of +7.8% from 2012 to 2022. At the same time, the Netherlands (+26.2%), Denmark (+10.4%), Slovenia (+6.3%), Poland (+6.1%), Spain (+4.1%) and Finland (+2.1%) displayed positive paces of growth. Moreover, the Netherlands emerged as the fastest-growing exporter exported in the European Union, with a CAGR of +26.2% from 2012-2022. Portugal experienced a relatively flat trend pattern. By contrast, Germany (-3.2%) and France (-6.6%) illustrated a downward trend over the same period. While the share of Italy (+15 p.p.) and the Netherlands (+8.1 p.p.) increased significantly in terms of the total exports from 2012-2022, the share of Portugal (-1.9 p.p.), France (-2.9 p.p.) and Germany (-16.4 p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplying countries in the European Union were Germany ($X), Italy ($X) and Finland ($X), together comprising 62% of total exports. The Netherlands, France, Spain, Poland, Denmark, Portugal and Slovenia lagged somewhat behind, together accounting for a further 20%.

Slovenia, with a CAGR of +10.3%, saw the highest growth rate of the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

In 2022, the export price in the European Union amounted to $X per unit, waning by -16.7% against the previous year. Over the period under review, the export price continues to indicate a abrupt shrinkage. The growth pace was the most rapid in 2019 when the export price increased by 3.7%. The level of export peaked at $X per unit in 2013; however, from 2014 to 2022, the export prices failed to regain momentum.

There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Finland ($X per unit), while Portugal ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Slovenia (+3.8%), while the other leaders experienced mixed trends in the export price figures.

Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Imports in the EU

Imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids shrank to X units in 2022, with a decrease of -7.2% against the previous year's figure. Over the period under review, imports, however, saw a perceptible increase. The most prominent rate of growth was recorded in 2019 with an increase of 135%. As a result, imports attained the peak of X units. From 2020 to 2022, the growth of imports of remained at a lower figure.

In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X in 2022. Total imports indicated a noticeable expansion from 2012 to 2022: its value increased at an average annual rate of +4.6% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by +76.5% against 2016 indices. The most prominent rate of growth was recorded in 2021 with an increase of 20%. The level of import peaked in 2022 and is expected to retain growth in years to come.

Imports by Country

The purchases of the three major importers of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids, namely Germany, France and Romania, represented more than third of total import. It was distantly followed by Austria (X units), Spain (X units), Italy (X units) and Poland (X units), together generating a 23% share of total imports. The following importers - the Netherlands (X units), Portugal (X units), Ireland (X units), Belgium (X units), Hungary (X units) and the Czech Republic (X units) - together made up 16% of total imports.

From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Ireland (with a CAGR of +26.9%), while imports for the other leaders experienced more modest paces of growth.

In value terms, Germany ($X), France ($X) and Italy ($X) appeared to be the countries with the highest levels of imports in 2022, together accounting for 36% of total imports. Poland, the Netherlands, Austria, Spain, Romania, Belgium, the Czech Republic, Ireland, Hungary and Portugal lagged somewhat behind, together accounting for a further 46%.

In terms of the main importing countries, Ireland, with a CAGR of +16.8%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The import price in the European Union stood at $X per unit in 2022, surging by 11% against the previous year. Over the period under review, the import price recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2020 when the import price increased by 116%. Over the period under review, import prices hit record highs at $X per unit in 2014; however, from 2015 to 2022, import prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was the Netherlands ($X per unit), while Romania ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Hungary (+7.8%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :