Europe - Plastic Tubes, Pipes and Hoses, and Fitting - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Plastics Tubes, Pipes And Hoses, And Fitting 2024
Market Size for Plastics Tubes, Pipes And Hoses, And Fitting in Europe
The Europe plastic pipe and hose market was estimated at $X in 2022, with an increase of X% against the previous year. The market value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The level of consumption peaked in 2022 and is expected to retain growth in years to come.
Production of Plastics Tubes, Pipes And Hoses, And Fitting in Europe
In value terms, plastic pipe and hose production expanded modestly to $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern remained consistent, with somewhat noticeable fluctuations being observed in certain years. The pace of growth was the most pronounced in 2021 when the production volume increased by X%. Over the period under review, production hit record highs in 2022 and is expected to retain growth in the near future.
Exports of Plastics Tubes, Pipes And Hoses, And Fitting
Exports in Europe
In 2022, shipments abroad of plastics tubes, pipes and hoses, and fitting decreased by X% to X tons for the first time since 2011, thus ending a ten-year rising trend. The total export volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. As a result, the exports reached the peak of X tons, and then declined slightly in the following year.
In value terms, plastic pipe and hose exports amounted to $X in 2022. Total exports indicated a measured expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2015 indices. The pace of growth was the most pronounced in 2021 when exports increased by X% against the previous year. The level of export peaked in 2022 and is likely to see gradual growth in the near future.
Exports by Country
Germany (X tons) and Italy (X tons) represented roughly X% of total exports in 2022. Poland (X tons) ranks next in terms of the total exports with a X% share, followed by Spain (X%) and the Netherlands (X%). France (X tons), Austria (X tons), the Czech Republic (X tons), the UK (X tons), Belgium (X tons), Sweden (X tons), Switzerland (X tons) and Russia (X tons) held a little share of total exports.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main exporting countries, was attained by Russia (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) remains the largest plastic pipe and hose supplier in Europe, comprising X% of total exports. The second position in the ranking was held by Italy ($X), with a X% share of total exports. It was followed by Poland, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value in Germany totaled X%. In the other countries, the average annual rates were as follows: Italy (X% per year) and Poland (X% per year).
Export Prices by Country
The export price in Europe stood at $X per ton in 2022, rising by X% against the previous year. Over the last decade, it increased at an average annual rate of X%. The growth pace was the most rapid in 2021 an increase of X% against the previous year. Over the period under review, the export prices attained the peak figure in 2022 and is expected to retain growth in years to come.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was the UK ($X per ton), while Russia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced more modest paces of growth.
Imports of Plastics Tubes, Pipes And Hoses, And Fitting
Imports in Europe
For the seventh year in a row, Europe recorded growth in overseas purchases of plastics tubes, pipes and hoses, and fitting, which increased by X% to X tons in 2022. The total import volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The volume of import peaked in 2022 and is likely to see gradual growth in years to come.
In value terms, plastic pipe and hose imports stood at $X in 2022. Total imports indicated a notable increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2015 indices. The pace of growth was the most pronounced in 2021 when imports increased by X%. Over the period under review, imports attained the peak figure in 2022 and are expected to retain growth in years to come.
Imports by Country
The purchases of the twelve major importers of plastics tubes, pipes and hoses, and fitting, namely Germany, France, Belgium, the Netherlands, Russia, the UK, Austria, Poland, Italy, Spain, Sweden and the Czech Republic, represented more than two-thirds of total import. Romania (X tons) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Belgium (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), France ($X) and the Netherlands ($X) were the countries with the highest levels of imports in 2022, with a combined X% share of total imports.
Among the main importing countries, the Netherlands, with a CAGR of X%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Europe stood at $X per ton in 2022, approximately equating the previous year. Over the last decade, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2021 an increase of X%. The level of import peaked in 2022 and is likely to see steady growth in the near future.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Italy ($X per ton), while Belgium ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for plastic pipe and hose in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212153 - Rigid tubes, pipes and hoses of polymers of ethylene
- Prodcom 22212155 - Rigid tubes, pipes and hoses of polymers of propylene
- Prodcom 22212157 - Rigid tubes, pipes and hoses of polymers of vinyl chloride
- Prodcom 22212170 - Rigid tubes, pipes and hoses of plastics (excluding of polymers of ethylene, of polymers of propylene, of polymers of vinyl chloride)
- Prodcom 22212920 - Flexible tubes, pipes and hoses of plastics, with a burst pressure . .27,6 MPa
- Prodcom 22212935 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings
- Prodcom 22212937 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors
- Prodcom 22212950 - Plastic tubes, pipes and hoses (excluding artificial guts, s ausage skins, rigid, flexible tubes and pipes having a minimum burst pressure of .27,6 MPa)
- Prodcom 22212970 - Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, p ipes and hoses
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic pipe and hose in Asia.
This report provides an in-depth analysis of the market for plastic pipe and hose in the U.S..
This report provides an in-depth analysis of the market for plastic pipe and hose in China.
This report provides an in-depth analysis of the market for plastic pipe and hose in the EU.
This report provides an in-depth analysis of the global market for plastic pipe and hose.
- Plastic Pipe and Hose Market
- Plastic Self-adhesive Plate Market
- Plastic Bath or Sink Market
- Plastic Sanitary Ware Market
- Plastic Lavatory Seat Market
- Ethylene Polymer Bag Market
- Plastic Supports Market
- Plastic Tableware and Kitchenware Market
- Plastic Household Ware Market
- Plastic Household Articles Market