World - Nails, Tacks, Staples, Screws and Bolts - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingGlobal Nail And Bolt Market 2024
Nail And Bolt Market Size
In 2021, the global nail and bolt market increased by 11% to $X for the first time since 2018, thus ending a two-year declining trend. The market value increased at an average annual rate of +1.1% over the period from 2012 to 2021; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded throughout the analyzed period. Global consumption peaked at $X in 2016; however, from 2017 to 2021, consumption stood at a somewhat lower figure.
Nail And Bolt Production
In value terms, nail and bolt production expanded modestly to $X in 2021 estimated in export price. The total output value increased at an average annual rate of +1.0% from 2012 to 2021; the trend pattern remained consistent, with only minor fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2018 when the production volume increased by 11% against the previous year. As a result, production reached the peak level of $X. From 2019 to 2021, global production growth failed to regain momentum.
Nail And Bolt Exports
Exports
In 2021, shipments abroad of nails, tacks, staples, screws and bolts was finally on the rise to reach X tons for the first time since 2018, thus ending a two-year declining trend. The total export volume increased at an average annual rate of +3.5% over the period from 2012 to 2021; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2017 when exports increased by 36%. The global exports peaked in 2021 and are expected to retain growth in the near future.
In value terms, nail and bolt exports soared to $X in 2021. The total export value increased at an average annual rate of +4.1% over the period from 2012 to 2021; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
Exports by Country
China was the key exporting country with an export of about X tons, which resulted at 37% of total exports. Taiwan (Chinese) (X tons) held a 13% share (based on physical terms) of total exports, which put it in second place, followed by Germany (7.3%) and the United States (5.6%). Italy (X tons), Vietnam (X tons), India (X tons), Japan (X tons), the Netherlands (X tons), Turkey (X tons), South Korea (X tons), Poland (X tons) and Thailand (X tons) took a little share of total exports.
From 2012 to 2021, average annual rates of growth with regard to nail and bolt exports from China stood at +3.9%. At the same time, Turkey (+12.7%), Vietnam (+12.6%), Poland (+6.7%), the Netherlands (+6.4%), India (+4.2%), Thailand (+4.1%), Germany (+3.0%), South Korea (+2.9%), the United States (+2.4%), Taiwan (Chinese) (+2.2%) and Italy (+1.8%) displayed positive paces of growth. Moreover, Turkey emerged as the fastest-growing exporter exported in the world, with a CAGR of +12.7% from 2012-2021. Japan experienced a relatively flat trend pattern. From 2012 to 2021, the share of Vietnam increased by +1.5 percentage points, while the shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, the largest nail and bolt supplying countries worldwide were China ($X), Germany ($X) and Taiwan (Chinese) ($X), together comprising 47% of global exports. The United States, Japan, Italy, the Netherlands, South Korea, Vietnam, India, Poland, Turkey and Thailand lagged somewhat behind, together comprising a further 30%.
Vietnam, with a CAGR of +14.7%, recorded the highest rates of growth with regard to the value of exports, among the main exporting countries over the period under review, while shipments for the other global leaders experienced more modest paces of growth.
Export Prices by Country
In 2021, the average nail and bolt export price amounted to $X per ton, increasing by 6.1% against the previous year. Overall, the export price continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2016 when the average export price increased by 27%. As a result, the export price reached the peak level of $X per ton. From 2017 to 2021, the average export prices remained at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Japan ($X per ton), while Vietnam ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by China (+3.7%), while the other global leaders experienced more modest paces of growth.
Nail And Bolt Imports
Imports
After two years of decline, overseas purchases of nails, tacks, staples, screws and bolts increased by 16% to X tons in 2021. The total import volume increased at an average annual rate of +2.0% from 2012 to 2021; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded in certain years. As a result, imports reached the peak and are likely to continue growth in the immediate term.
In value terms, nail and bolt imports surged to $X in 2021. The total import value increased at an average annual rate of +3.1% over the period from 2012 to 2021; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded in certain years. As a result, imports reached the peak and are likely to continue growth in the immediate term.
Imports by Country
In 2021, the United States (X tons), followed by Canada (X tons) and Germany (X tons) were the major importers of nails, tacks, staples, screws and bolts, together comprising 38% of total imports. The following importers - Spain (X tons), Russia (X tons), France (X tons), the UK (X tons), Poland (X tons), the Netherlands (X tons), Italy (X tons), Japan (X tons), China (X tons) and India (X tons) - together made up 26% of total imports.
From 2012 to 2021, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Spain (with a CAGR of +12.0%), while imports for the other global leaders experienced more modest paces of growth.
In value terms, the United States ($X), Germany ($X) and China ($X) were the countries with the highest levels of imports in 2021, together accounting for 29% of global imports. France, Canada, the UK, the Netherlands, Italy, Poland, Russia, Japan, Spain and India lagged somewhat behind, together accounting for a further 26%.
Poland, with a CAGR of +7.7%, saw the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other global leaders experienced more modest paces of growth.
Import Prices by Country
The average nail and bolt import price stood at $X per ton in 2021, growing by 8.9% against the previous year. Over the period from 2012 to 2021, it increased at an average annual rate of +1.1%. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major importing countries. In 2021, amid the top importers, the country with the highest price was China ($X per ton), while Canada ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Russia (+2.6%), while the other global leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the global nail and bolt market. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25931410 -
- Prodcom 25931480 -
- Prodcom 25941113 - Screws, turned from bars, rods, profiles, or wire, of a shank thickness . 6 mm
- Prodcom 25941115 - Other screws and bolts for fixing railway truck construction material, iron or steel
- Prodcom 25941117 - Screws and bolts without heads in steel
- Prodcom 25941123 - Slotted and cross-recessed screws of stainless steel
- Prodcom 25941125 - Other screws and bolts with heads
- Prodcom 25941127 - Hexagon socket head screws of stainless steel
- Prodcom 25941129 - Other hexagon socket head screws
- Prodcom 25941131 - Stainless steel hexagon bolts with heads
- Prodcom 25941133 - Iron or steel hexagon bolts with heads, with a tensile strength < .800 MPa (excluding of stainless steel)
- Prodcom 25941135 - Iron or steel hexagon bolts with heads, with a tensile strength. .800 MPa (excluding of stainless steel)
- Prodcom 25941139 - Iron or steel bolts with heads (excluding hexagon bolts)
- Prodcom 25941153 - Iron or steel wood screws
- Prodcom 25941157 - Iron or steel screw hooks and screw rings
- Prodcom 25941173 - Stainless steel self-tapping screws (excluding threaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941175 - Iron or steel self-tapping screws (excluding of stainless steel, t hreaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941183 - Iron or steel nuts turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm
- Prodcom 25941185 - Stainless steel nuts (excluding those turned from bars, rods, p rofiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941187 - Iron or steel nuts (including self-locking nuts) (excluding of stainless steel, turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941190 - Threaded articles, n.e.c., of iron or steel
- Prodcom 25941210 - Iron or steel spring washers and other lock washers
- Prodcom 25941230 - Iron or steel washers (excluding spring washers and other lock washers)
- Prodcom 25941250 - Iron or steel rivets (including partly hollow rivets) (excluding tubular or bifurcated rivets for all purposes)
- Prodcom 25941270 - Iron or steel cotters and cotter-pins and similar non-threaded articles (excluding washers, rivets)
- Prodcom 25941310 - Washers, rivets, cotters, cotter pins and the like, not threaded, of copper
- Prodcom 25941340 - Copper screws, bolts and nuts (excluding pointed screw nails, s crew stoppers, threaded mechanisms used to transmit motion/to act as active machinery part, screw hooks, rings)
- Prodcom 25941370 - Threaded articles of copper, n.e.c.
Country coverage:
Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:
- USA
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
+ the largest producing countries
Data coverage:
- Global market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Global production, split by region and country
- Global trade (exports and imports)
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- United States
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the nail and bolt market in Asia.
This report provides an in-depth analysis of the nail and bolt market in the EU.
This report provides an in-depth analysis of the nail and bolt market in the U.S..
This report provides an in-depth analysis of the nail and bolt market in China.
- Nail and Bolt Market
- Aluminium Window and Door Market
- Sanitary Alluminium Ware Market
- Plastic Floor Market
- Marble Building Stone Market
- Central Heating Boilers Market
- Cement Prefabricated Structural Components Market
- Float Glass and Surface Ground or Polished Glass Market
- Wooden Window Market
- Wooden Door Market