Indonesia: Blow-Moulding Machine Market 2025

Blow-Moulding Machine Market Size in Indonesia

In 2022, the Indonesian blow-moulding machine market decreased by -0.1% to $X, falling for the second consecutive year after three years of growth. The market value increased at an average annual rate of +1.2% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Blow-moulding machine consumption peaked at $X in 2020; however, from 2021 to 2022, consumption stood at a somewhat lower figure.

Blow-Moulding Machine Production in Indonesia

In value terms, blow-moulding machine production contracted slightly to $X in 2022 estimated in export price. Over the period under review, the total production indicated moderate growth from 2012 to 2022: its value increased at an average annual rate of +4.0% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production increased by +1.9% against 2020 indices. The pace of growth was the most pronounced in 2015 with an increase of 137%. As a result, production attained the peak level of $X. From 2016 to 2022, production growth failed to regain momentum.

Blow-Moulding Machine Exports

Exports from Indonesia

In 2022, overseas shipments of blow-moulding machines for working rubber or plastics decreased by -7.7% to X units, falling for the fourth consecutive year after four years of growth. Overall, exports saw a pronounced descent. The growth pace was the most rapid in 2013 when exports increased by 175%. As a result, the exports attained the peak of X units. From 2014 to 2022, the growth of the exports remained at a lower figure.

In value terms, blow-moulding machine exports surged to $X in 2022. Over the period under review, exports, however, saw a tangible expansion. The growth pace was the most rapid in 2015 when exports increased by 624%. The exports peaked at $X in 2013; however, from 2014 to 2022, the exports failed to regain momentum.

Exports by Country

The Philippines (X units), Vietnam (X units) and India (X units) were the main destinations of blow-moulding machine exports from Indonesia, together accounting for 25% of total exports.

From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by the Philippines (with a CAGR of 0.0%), while the other leaders experienced more modest paces of growth.

In value terms, China ($X), Singapore ($X) and Japan ($X) were the largest markets for blow-moulding machine exported from Indonesia worldwide, with a combined 78% share of total exports. India, the Philippines, Taiwan (Chinese), South Africa, Vietnam, Malaysia, Thailand, the United States and Hong Kong SAR lagged somewhat behind, together comprising a further 22%.

Among the main countries of destination, Thailand, with a CAGR of +104.6%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average blow-moulding machine export price stood at $X per unit in 2022, surging by 158% against the previous year. In general, the export price continues to indicate a prominent increase. The pace of growth was the most pronounced in 2015 when the average export price increased by 624%. The export price peaked in 2022 and is expected to retain growth in the near future.

Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was China ($X per unit), while the average price for exports to Hong Kong SAR ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Thailand (+104.6%), while the prices for the other major destinations experienced more modest paces of growth.

Blow-Moulding Machine Imports

Imports into Indonesia

In 2022, approx. X units of blow-moulding machines for working rubber or plastics were imported into Indonesia; picking up by 1.8% compared with 2021 figures. In general, imports, however, recorded a abrupt setback. The most prominent rate of growth was recorded in 2020 with an increase of 86%. Over the period under review, imports hit record highs at X units in 2013; however, from 2014 to 2022, imports stood at a somewhat lower figure.

In value terms, blow-moulding machine imports plummeted to $X in 2022. Over the period under review, imports, however, continue to indicate a deep downturn. The most prominent rate of growth was recorded in 2020 with an increase of 46%. Over the period under review, imports attained the peak figure at $X in 2014; however, from 2015 to 2022, imports failed to regain momentum.

Imports by Country

In 2022, China (X units) constituted the largest blow-moulding machine supplier to Indonesia, with a 84% share of total imports. Moreover, blow-moulding machine imports from China exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X units), more than tenfold. Japan (X units) ranked third in terms of total imports with a 5.6% share.

From 2012 to 2022, the average annual growth rate of volume from China totaled +2.1%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (-14.9% per year) and Japan (-14.6% per year).

In value terms, China ($X) constituted the largest supplier of blow-moulding machines for working rubber or plastics to Indonesia, comprising 36% of total imports. The second position in the ranking was taken by Taiwan (Chinese) ($X), with a 15% share of total imports. It was followed by Japan, with a 10% share.

From 2012 to 2022, the average annual rate of growth in terms of value from China amounted to -1.4%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (-11.4% per year) and Japan (-18.9% per year).

Import Prices by Country

In 2022, the average blow-moulding machine import price amounted to $X per unit, shrinking by -45.2% against the previous year. Overall, the import price recorded a abrupt decline. The pace of growth appeared the most rapid in 2015 when the average import price increased by 25% against the previous year. As a result, import price attained the peak level of $X per unit. From 2016 to 2022, the average import prices failed to regain momentum.

Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per unit), while the price for the United States ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Malaysia (+41.0%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :