Italy: Market for Safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels 2022

Market Size for Safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels in Italy

The Italian market for safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses contracted modestly to $X in 2020, approximately mirroring the previous year. Overall, the total consumption indicated a notable increase from 2007 to 2020: its value increased at an average annual rate of +X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, consumption decreased by -X% against 2018 indices. The pace of growth was the most pronounced in 2010 when the market value increased by X% against the previous year. As a result, consumption reached the peak level of $X. from 2011 to 2020, the growth of the market remained at a somewhat lower figure.

Production of Safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels in Italy

In value terms, production of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses fell to $X in 2020 estimated in export prices. In general, production posted a prominent expansion. The pace of growth was the most pronounced in 2010 when the production volume increased by X% y-o-y. As a result, production reached the peak level of $X. from 2011 to 2020, production growth remained at a lower figure.

Exports of Safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels

Exports from Italy

For the fourth year in a row, Italy recorded decline in shipments abroad of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses, which decreased by -X% to X square meters in 2020. Over the period under review, exports recorded a abrupt slump. The growth pace was the most rapid in 2010 with an increase of X% y-o-y. Exports peaked at X square meters in 2007; however, from 2008 to 2020, exports stood at a somewhat lower figure.

In value terms, exports of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses fell rapidly to $X in 2020. In general, exports saw a abrupt setback. The pace of growth was the most pronounced in 2011 when exports increased by X% year-to-year. As a result, exports reached the peak of $X. from 2012 to 2020, the growth of exports failed to regain the momentum.

Exports by Country

Germany (X square meters) was the main destination for exports of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses from Italy, with a X% share of total exports. Moreover, exports of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses to Germany exceeded the volume sent to the second major destination, France (X square meters), twofold. The third position in this ranking was occupied by Poland (X square meters), with a X% share.

From 2007 to 2020, the average annual rate of growth in terms of volume to Germany totaled -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: France (-X% per year) and Poland (+X% per year).

In value terms, Germany ($X) remains the key foreign market for safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels exports from Italy, comprising X% of total exports. The second position in the ranking was occupied by France ($X), with a X% share of total exports. It was followed by Poland, with a X% share.

From 2007 to 2020, the average annual rate of growth in terms of value to Germany totaled -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: France (-X% per year) and Poland (-X% per year).

Export Prices by Country

The average export price for safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses stood at $X per square meter in 2020, falling by -X% against the previous year. Over the period under review, the export price, however, continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2008 an increase of X% against the previous year. The export price peaked at $X per square meter in 2019, and then contracted in the following year.

There were significant differences in the average prices for the major export markets. In 2020, the country with the highest price was Turkey ($X per square meter), while the average price for exports to Slovakia ($X per square meter) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to Germany, while the prices for the other major destinations experienced more modest paces of growth.

Imports of Safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels

Imports into Italy

In 2020, purchases abroad of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses was finally on the rise to reach X square meters for the first time since 2017, thus ending a two-year declining trend. Overall, total imports indicated mild growth from 2007 to 2020: its volume increased at an average annual rate of +X% over the last thirteen years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2010 when imports increased by X% year-to-year. Over the period under review, imports attained the maximum in 2020 and are expected to retain growth in years to come.

In value terms, imports of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses expanded sharply to $X in 2020. Over the period under review, imports saw a pronounced shrinkage. The growth pace was the most rapid in 2010 with an increase of X% year-to-year. As a result, imports reached the peak of $X. from 2011 to 2020, the growth of imports remained at a lower figure.

Imports by Country

In 2020, China (X square meters) constituted the largest safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels supplier to Italy, with a X% share of total imports. Moreover, imports of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses from China exceeded the figures recorded by the second-largest supplier, Spain (X square meters), threefold. Turkey (X square meters) ranked third in terms of total imports with a X% share.

From 2007 to 2020, the average annual growth rate of volume from China totaled +X%. The remaining supplying countries recorded the following average annual rates of imports growth: Spain (+X% per year) and Turkey (+X% per year).

In value terms, China ($X) constituted the largest supplier of safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels to Italy, comprising X% of total imports. The second position in the ranking was occupied by Turkey ($X), with a X% share of total imports. It was followed by Spain, with a X% share.

From 2007 to 2020, the average annual rate of growth in terms of value from China amounted to +X%. The remaining supplying countries recorded the following average annual rates of imports growth: Turkey (+X% per year) and Spain (-X% per year).

Import Prices by Country

In 2020, the average import price for safety glass, toughened (tempered), of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vesselses amounted to $X per square meter, reducing by -X% against the previous year. Overall, the import price continues to indicate a pronounced curtailment. The most prominent rate of growth was recorded in 2008 an increase of X% y-o-y. As a result, import price attained the peak level of $X per square meter. from 2009 to 2020, the growth in terms of the average import prices failed to regain the momentum.

There were significant differences in the average prices amongst the major supplying countries. In 2020, the country with the highest price was Poland ($X per square meter), while the price for Sweden ($X per square meter) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Poland, while the prices for the other major suppliers experienced mixed trend patterns.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :