Malaysia - Plastic Baths, Wash-Basins, Lavatory Pans and Covers and Similar Sanitary Ware - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMalaysia: Plastic Sanitary Ware Market 2024
Plastic Sanitary Ware Market Size in Malaysia
The Malaysian plastic sanitary ware market was finally on the rise to reach $X in 2022, after two years of decline. Over the period under review, the total consumption indicated prominent growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, consumption attained the peak level and is likely to continue growth in the immediate term.
Plastic Sanitary Ware Production in Malaysia
In value terms, plastic sanitary ware production expanded slightly to $X in 2022 estimated in export price. Overall, the total production indicated a prominent expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2017 with an increase of X%. Over the period under review, production reached the peak level at $X in 2020; however, from 2021 to 2022, production failed to regain momentum.
Plastic Sanitary Ware Exports
Exports from Malaysia
In 2022, overseas shipments of plastic baths, wash-basins, lavatory pans and covers and similar sanitary ware decreased by X% to X units for the first time since 2019, thus ending a two-year rising trend. In general, exports saw a abrupt decrease. The pace of growth was the most pronounced in 2020 when exports increased by X%. Over the period under review, the exports attained the maximum at X units in 2021, and then reduced sharply in the following year.
In value terms, plastic sanitary ware exports fell rapidly to $X in 2022. Over the period under review, exports showed a abrupt setback. The growth pace was the most rapid in 2020 when exports increased by X% against the previous year. Over the period under review, the exports attained the peak figure at $X in 2021, and then reduced rapidly in the following year.
Exports by Country
Thailand (X units), Sweden (X units) and Indonesia (X units) were the main destinations of plastic sanitary ware exports from Malaysia, with a combined X% share of total exports. The United Arab Emirates, Vietnam, Singapore, Kenya, Bangladesh, Japan, Maldives, Mauritius and the United States lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Maldives (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Thailand ($X) emerged as the key foreign market for plastic baths, wash-basins, lavatory pans and covers and similar sanitary ware exports from Malaysia, comprising X% of total exports. The second position in the ranking was held by Sweden ($X), with a X% share of total exports. It was followed by Maldives, with a X% share.
From 2012 to 2022, the average annual growth rate of value to Thailand stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Sweden (X% per year) and Maldives (X% per year).
Export Prices by Country
In 2022, the average plastic sanitary ware export price amounted to $X per unit, rising by X% against the previous year. In general, the export price, however, showed a slight reduction. The export price peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.
There were significant differences in the average prices for the major overseas markets. In 2022, amid the top suppliers, the country with the highest price was Maldives ($X per unit), while the average price for exports to the United Arab Emirates ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Maldives (X%), while the prices for the other major destinations experienced more modest paces of growth.
Plastic Sanitary Ware Imports
Imports into Malaysia
In 2022, plastic sanitary ware imports into Malaysia skyrocketed to X units, increasing by X% against the year before. Over the period under review, imports, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2021 with an increase of X%. Imports peaked at X units in 2014; however, from 2015 to 2022, imports stood at a somewhat lower figure.
In value terms, plastic sanitary ware imports rose notably to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2021 when imports increased by X%. Imports peaked at $X in 2015; however, from 2016 to 2022, imports failed to regain momentum.
Imports by Country
In 2022, China (X units) constituted the largest plastic sanitary ware supplier to Malaysia, accounting for a X% share of total imports. It was followed by Japan (X units), with a X% share of total imports. South Korea (X units) ranked third in terms of total imports with a X% share.
From 2012 to 2022, the average annual growth rate of volume from China was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (X% per year) and South Korea (X% per year).
In value terms, China ($X) constituted the largest supplier of plastic baths, wash-basins, lavatory pans and covers and similar sanitary ware to Malaysia, comprising X% of total imports. The second position in the ranking was taken by Japan ($X), with a X% share of total imports. It was followed by South Korea, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from China was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (X% per year) and South Korea (X% per year).
Import Prices by Country
In 2022, the average plastic sanitary ware import price amounted to $X per unit, almost unchanged from the previous year. Over the period under review, import price indicated modest growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, plastic sanitary ware import price decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2015 when the average import price increased by X%. The import price peaked at $X per unit in 2020; however, from 2021 to 2022, import prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Japan ($X per unit), while the price for Thailand ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Japan (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the plastic sanitary ware market in Malaysia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22231250 - Plastic baths, shower-baths, sinks and wash-basins
- Prodcom 22231270 - Plastic lavatory seats and covers
- Prodcom 22231290 - Plastic bidets, lavatory pans, flushing cisterns and similar sanitary ware (excluding baths, showers-baths, sinks and wash-basins, lavatory seats and covers)
Country coverage:
- Malaysia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Malaysia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the plastic sanitary ware market in Asia.
This report provides an in-depth analysis of the plastic sanitary ware market in the U.S..
This report provides an in-depth analysis of the plastic sanitary ware market in China.
This report provides an in-depth analysis of the plastic sanitary ware market in the EU.
This report provides an in-depth analysis of the global plastic sanitary ware market.
- Market Research in Malaysia
- Plastic Sanitary Ware Market
- Plastic Pipe and Hose Market
- Plastic Self-adhesive Plate Market
- Plastic Bath or Sink Market
- Plastic Lavatory Seat Market
- Ethylene Polymer Bag Market
- Plastic Supports Market
- Plastic Tableware and Kitchenware Market
- Plastic Household Ware Market