Netherlands: Market for Machines For The Manufacture Of Semiconductor Boules Or Wafers 2025

Market Size for Machines For The Manufacture Of Semiconductor Boules Or Wafers in the Netherlands

In 2021, the Dutch semiconductor wafer manufacturing machine market increased by 82% to $X, rising for the third consecutive year after two years of decline. Over the period under review, consumption, however, continues to indicate a abrupt curtailment. Over the period under review, the market reached the maximum level at $X in 2012; however, from 2013 to 2021, consumption remained at a lower figure.

Production of Machines For The Manufacture Of Semiconductor Boules Or Wafers in the Netherlands

In value terms, semiconductor wafer manufacturing machine production fell to $X in 2021 estimated in export price. In general, production, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the production volume increased by 11% against the previous year. Over the period under review, production reached the peak level at $X in 2014; however, from 2015 to 2021, production failed to regain momentum.

Exports of Machines For The Manufacture Of Semiconductor Boules Or Wafers

Exports from the Netherlands

In 2021, shipments abroad of machines for the manufacture of semiconductor boules or wafers decreased by -68.9% to X units, falling for the third consecutive year after two years of growth. In general, exports, however, continue to indicate perceptible growth. The pace of growth appeared the most rapid in 2015 when exports increased by 347% against the previous year. Over the period under review, the exports hit record highs at X units in 2018; however, from 2019 to 2021, the exports failed to regain momentum.

In value terms, semiconductor wafer manufacturing machine exports reduced markedly to $X in 2021. Over the period under review, exports, however, continue to indicate moderate growth. The growth pace was the most rapid in 2015 with an increase of 233% against the previous year. The exports peaked at $X in 2018; however, from 2019 to 2021, the exports remained at a lower figure.

Exports by Country

Singapore (X units), Austria (X units) and China (X units) were the main destinations of semiconductor wafer manufacturing machine exports from the Netherlands, with a combined 80% share of total exports.

From 2012 to 2021, the biggest increases were recorded for Singapore (with a CAGR of +60.5%), while shipments for the other leaders experienced more modest paces of growth.

In value terms, Austria ($X) emerged as the key foreign market for machines for the manufacture of semiconductor boules or wafers exports from the Netherlands, comprising 54% of total exports. The second position in the ranking was taken by Singapore ($X), with an 18% share of total exports. It was followed by Taiwan (Chinese), with a 7% share.

From 2012 to 2021, the average annual rate of growth in terms of value to Austria stood at +16.4%. Exports to the other major destinations recorded the following average annual rates of exports growth: Singapore (+44.1% per year) and Taiwan (Chinese) (-10.7% per year).

Export Prices by Country

The average semiconductor wafer manufacturing machine export price stood at $X per unit in 2021, increasing by 15% against the previous year. Over the period from 2012 to 2021, it increased at an average annual rate of +1.7%. The pace of growth was the most pronounced in 2018 an increase of 47% against the previous year. Over the period under review, the average export prices reached the peak figure at $X per unit in 2014; however, from 2015 to 2021, the export prices stood at a somewhat lower figure.

Prices varied noticeably country of destination: the country with the highest price was Finland ($X per unit), while the average price for exports to the United States ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Finland (+7.8%), while the prices for the other major destinations experienced a decline.

Imports of Machines For The Manufacture Of Semiconductor Boules Or Wafers

Imports into the Netherlands

In 2021, purchases abroad of machines for the manufacture of semiconductor boules or wafers was finally on the rise to reach X units for the first time since 2018, thus ending a two-year declining trend. Overall, imports, however, recorded a sharp reduction. Over the period under review, imports reached the maximum at X units in 2012; however, from 2013 to 2021, imports failed to regain momentum.

In value terms, semiconductor wafer manufacturing machine imports surged to $X in 2021. Over the period under review, imports, however, continue to indicate a significant curtailment. The growth pace was the most rapid in 2014 when imports increased by 207%. Over the period under review, imports attained the maximum at $X in 2012; however, from 2013 to 2021, imports stood at a somewhat lower figure.

Imports by Country

In 2021, Austria (X units) constituted the largest supplier of semiconductor wafer manufacturing machine to the Netherlands, accounting for a 50% share of total imports. Moreover, semiconductor wafer manufacturing machine imports from Austria exceeded the figures recorded by the second-largest supplier, the Philippines (X units), twofold. The third position in this ranking was held by Germany (X units), with a 9.8% share.

From 2012 to 2021, the average annual growth rate of volume from Austria totaled +32.5%. The remaining supplying countries recorded the following average annual rates of imports growth: the Philippines (+37.6% per year) and Germany (-14.5% per year).

In value terms, Austria ($X) constituted the largest supplier of machines for the manufacture of semiconductor boules or wafers to the Netherlands, comprising 46% of total imports. The second position in the ranking was taken by the Philippines ($X), with a 9.4% share of total imports. It was followed by Germany, with a 9.1% share.

From 2012 to 2021, the average annual rate of growth in terms of value from Austria stood at +26.4%. The remaining supplying countries recorded the following average annual rates of imports growth: the Philippines (+17.2% per year) and Germany (-15.2% per year).

Import Prices by Country

In 2021, the average semiconductor wafer manufacturing machine import price amounted to $X per unit, with a decrease of -30.5% against the previous year. Overall, the import price, however, saw notable growth. The growth pace was the most rapid in 2019 when the average import price increased by 156%. As a result, import price attained the peak level of $X per unit. From 2020 to 2021, the average import prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2021, the country with the highest price was South Korea ($X per unit), while the price for the Philippines ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by South Korea (+19.1%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :