Poland: Market for Machine-Tools For Working Stone, Ceramics, And Concrete 2024

Market Size for Machine-Tools For Working Stone, Ceramics, And Concrete in Poland

The Polish market for machine-tools for working stone, ceramics, and concrete fell dramatically to $X in 2022, which is down by -24.9% against the previous year. Overall, consumption continues to indicate a pronounced setback. As a result, consumption attained the peak level of $X. From 2018 to 2022, the growth of the market remained at a somewhat lower figure.

Production of Machine-Tools For Working Stone, Ceramics, And Concrete in Poland

In value terms, machine tools for working stone production shrank slightly to $X in 2022 estimated in export price. In general, production, however, faced a abrupt contraction. The pace of growth was the most pronounced in 2016 with an increase of 273% against the previous year. Over the period under review, production hit record highs at $X in 2012; however, from 2013 to 2022, production failed to regain momentum.

Exports of Machine-Tools For Working Stone, Ceramics, And Concrete

Exports from Poland

In 2022, overseas shipments of machine-tools for working stone, ceramics, and concrete decreased by -7.1% to X units for the first time since 2017, thus ending a four-year rising trend. In general, exports, however, saw a prominent increase. The pace of growth appeared the most rapid in 2016 when exports increased by 213%. The exports peaked at X units in 2021, and then fell in the following year.

In value terms, machine tools for working stone exports declined to $X in 2022. Over the period under review, exports, however, recorded a resilient increase. The growth pace was the most rapid in 2021 when exports increased by 86%. As a result, the exports attained the peak of $X, and then declined in the following year.

Exports by Country

Belarus (X units), Turkey (X units) and Russia (X units) were the main destinations of machine tools for working stone exports from Poland, together accounting for 38% of total exports. Sweden, Romania, the Czech Republic, Ukraine, Chile, the UK, the United States, Germany and Hungary lagged somewhat behind, together accounting for a further 44%.

From 2012 to 2022, the biggest increases were recorded for Chile (with a CAGR of +96.0%), while shipments for the other leaders experienced more modest paces of growth.

In value terms, the largest markets for machine tools for working stone exported from Poland were the United States ($X), Turkey ($X) and Belarus ($X), together comprising 35% of total exports. Germany, Russia, the Czech Republic, Sweden, Romania, Chile, the UK, Hungary and Ukraine lagged somewhat behind, together accounting for a further 42%.

Chile, with a CAGR of +140.7%, saw the highest growth rate of the value of exports, in terms of the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average export price for machine-tools for working stone, ceramics, and concrete stood at $X per unit in 2022, which is down by -6.2% against the previous year. In general, export price indicated a tangible increase from 2012 to 2022: its price increased at an average annual rate of +3.2% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, machine tools for working stone export price increased by +10.8% against 2017 indices. The most prominent rate of growth was recorded in 2017 an increase of 78% against the previous year. The export price peaked at $X per unit in 2021, and then shrank in the following year.

Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was the United States ($X per unit), while the average price for exports to Ukraine ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Saudi Arabia (+37.2%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Machine-Tools For Working Stone, Ceramics, And Concrete

Imports into Poland

In 2022, after two years of growth, there was significant decline in supplies from abroad of machine-tools for working stone, ceramics, and concrete, when their volume decreased by -20% to X units. Overall, total imports indicated a notable expansion from 2012 to 2022: its volume increased at an average annual rate of +2.3% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2017 when imports increased by 52% against the previous year. As a result, imports reached the peak of X units. From 2018 to 2022, the growth of imports failed to regain momentum.

In value terms, machine tools for working stone imports reduced markedly to $X in 2022. In general, imports continue to indicate a noticeable shrinkage. The most prominent rate of growth was recorded in 2014 when imports increased by 41%. Over the period under review, imports hit record highs at $X in 2018; however, from 2019 to 2022, imports failed to regain momentum.

Imports by Country

China (X units), Italy (X units) and Germany (X units) were the main suppliers of machine tools for working stone imports to Poland, with a combined 91% share of total imports.

From 2012 to 2022, the biggest increases were recorded for Italy (with a CAGR of +10.3%), while purchases for the other leaders experienced more modest paces of growth.

In value terms, Italy ($X), Germany ($X) and China ($X) constituted the largest machine tools for working stone suppliers to Poland, with a combined 89% share of total imports. The Czech Republic lagged somewhat behind, comprising a further 1.6%.

Among the main suppliers, the Czech Republic, with a CAGR of +8.8%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2022, the average import price for machine-tools for working stone, ceramics, and concrete amounted to $X per unit, picking up by 2.6% against the previous year. In general, the import price, however, continues to indicate a pronounced slump. The growth pace was the most rapid in 2018 when the average import price increased by 40%. Over the period under review, average import prices hit record highs at $X per unit in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Germany ($X per unit), while the price for China ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (+5.1%), while the prices for the other major suppliers experienced mixed trend patterns.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :