Poland: Market for Numerically Controlled Drilling Machines For Working Metal 2024

Market Size for Numerically Controlled Drilling Machines For Working Metal in Poland

The Polish numerically controlled drilling machine market expanded modestly to $X in 2021, picking up by 2.1% against the previous year. In general, consumption showed a resilient expansion. Numerically controlled drilling machine consumption peaked in 2021 and is likely to continue growth in years to come.

Production of Numerically Controlled Drilling Machines For Working Metal in Poland

In value terms, numerically controlled drilling machine production shrank to $X in 2021 estimated in export price. In general, production, however, posted a significant increase. The pace of growth was the most pronounced in 2013 with an increase of 323%. Over the period under review, production reached the maximum level at $X in 2020, and then declined in the following year.

Exports of Numerically Controlled Drilling Machines For Working Metal

Exports from Poland

After two years of growth, shipments abroad of numerically controlled drilling machines for working metal decreased by -6.4% to X tons in 2021. Over the period under review, exports, however, enjoyed significant growth. The pace of growth was the most pronounced in 2017 when exports increased by 348% against the previous year. Over the period under review, the exports reached the maximum at X tons in 2020, and then dropped in the following year.

In value terms, numerically controlled drilling machine exports declined modestly to $X in 2021. Overall, exports, however, continue to indicate a significant expansion. The pace of growth appeared the most rapid in 2017 when exports increased by 971%. The exports peaked at $X in 2015; however, from 2016 to 2021, the exports stood at a somewhat lower figure.

Exports by Country

Russia (X tons) was the main destination for numerically controlled drilling machine exports from Poland, accounting for a 92% share of total exports. Moreover, numerically controlled drilling machine exports to Russia exceeded the volume sent to the second major destination, Uzbekistan (X tons), more than tenfold. India (X tons) ranked third in terms of total exports with a 1.8% share.

From 2012 to 2021, the average annual growth rate of volume to Russia amounted to +41.1%. Exports to the other major destinations recorded the following average annual rates of exports growth: Uzbekistan (0.0% per year) and India (+6.5% per year).

In value terms, Russia ($X) remains the key foreign market for numerically controlled drilling machines for working metal exports from Poland, comprising 94% of total exports. The second position in the ranking was taken by Uzbekistan ($X), with a 5.1% share of total exports. It was followed by India, with a 0.3% share.

From 2012 to 2021, the average annual rate of growth in terms of value to Russia totaled +51.8%. Exports to the other major destinations recorded the following average annual rates of exports growth: Uzbekistan (0.0% per year) and India (-0.4% per year).

Export Prices by Country

In 2021, the average numerically controlled drilling machine export price amounted to $X per ton, rising by 2.5% against the previous year. Overall, the export price enjoyed buoyant growth. The most prominent rate of growth was recorded in 2018 an increase of 209%. Over the period under review, the average export prices reached the peak figure at $X per ton in 2015; however, from 2016 to 2021, the export prices failed to regain momentum.

There were significant differences in the average prices for the major overseas markets. In 2021, the country with the highest price was Germany ($X per ton), while the average price for exports to India ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Turkey (+20.4%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Numerically Controlled Drilling Machines For Working Metal

Imports into Poland

In 2021, the amount of numerically controlled drilling machines for working metal imported into Poland skyrocketed to X tons, picking up by 61% on 2020. Over the period under review, imports, however, continue to indicate a abrupt setback. Over the period under review, imports attained the peak figure at X tons in 2012; however, from 2013 to 2021, imports failed to regain momentum.

In value terms, numerically controlled drilling machine imports soared to $X in 2021. Overall, imports, however, saw a abrupt curtailment. The most prominent rate of growth was recorded in 2017 when imports increased by 94% against the previous year. Over the period under review, imports hit record highs at $X in 2012; however, from 2013 to 2021, imports remained at a lower figure.

Imports by Country

In 2021, Spain (X tons) constituted the largest numerically controlled drilling machine supplier to Poland, accounting for a 66% share of total imports. Moreover, numerically controlled drilling machine imports from Spain exceeded the figures recorded by the second-largest supplier, Germany (X tons), sixfold. The third position in this ranking was held by Japan (X tons), with a 7.1% share.

From 2012 to 2021, the average annual growth rate of volume from Spain totaled +24.0%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (-7.1% per year) and Japan (-12.5% per year).

In value terms, Spain ($X) constituted the largest supplier of numerically controlled drilling machines for working metal to Poland, comprising 50% of total imports. The second position in the ranking was taken by Japan ($X), with a 23% share of total imports. It was followed by Germany, with a 10% share.

From 2012 to 2021, the average annual rate of growth in terms of value from Spain stood at +16.3%. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (-6.2% per year) and Germany (-8.9% per year).

Import Prices by Country

In 2021, the average numerically controlled drilling machine import price amounted to $X per ton, increasing by 15% against the previous year. Over the period under review, the import price, however, showed a pronounced contraction. The most prominent rate of growth was recorded in 2017 when the average import price increased by 30% against the previous year. Over the period under review, average import prices attained the maximum at $X per ton in 2013; however, from 2014 to 2021, import prices remained at a lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2021, the country with the highest price was Japan ($X per ton), while the price for Taiwan (Chinese) ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Japan (+7.2%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :