Puerto Rico - Nails, Tacks, Staples, Screws and Bolts - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingPuerto Rico: Nail And Bolt Market 2025
Nail And Bolt Market Size in Puerto Rico
In 2021, the Puerto Rican nail and bolt market increased by 2.5% to $X for the first time since 2017, thus ending a three-year declining trend. In general, consumption, however, recorded a noticeable downturn. As a result, consumption reached the peak level of $X. From 2018 to 2021, the growth of the market failed to regain momentum.
Nail And Bolt Production in Puerto Rico
In value terms, nail and bolt production reached $X in 2021 estimated in export price. In general, production, however, showed a slight shrinkage. The pace of growth appeared the most rapid in 2017 when the production volume increased by 42% against the previous year. As a result, production reached the peak level of $X. From 2018 to 2021, production growth remained at a somewhat lower figure.
Nail And Bolt Exports
Exports from Puerto Rico
In 2021, approx. less than X kg of nails, tacks, staples, screws and bolts were exported from Puerto Rico; leveling off at 2020. In general, exports recorded a relatively flat trend pattern.
In value terms, nail and bolt exports amounted to less than $X in 2021. Over the period under review, exports recorded a relatively flat trend pattern.
Exports by Country
In 2021, China (X tons) represented the key exporter of nails, tacks, staples, screws and bolts, mixing up 37% of total exports. Taiwan (Chinese) (X tons) took the second position in the ranking, followed by Germany (X tons) and the United States (X tons). All these countries together took approx. 25% share of total exports. The following exporters - Italy (X tons), Vietnam (X tons), India (X tons), Japan (X tons), the Netherlands (X tons), Turkey (X tons), South Korea (X tons), Poland (X tons) and Thailand (X tons) - together made up 21% of total exports.
Exports from China increased at an average annual rate of +3.9% from 2012 to 2021. At the same time, Turkey (+12.7%), Vietnam (+12.6%), Poland (+6.7%), the Netherlands (+6.4%), India (+4.2%), Thailand (+4.1%), Germany (+3.0%), South Korea (+2.9%), the United States (+2.4%), Taiwan (Chinese) (+2.2%) and Italy (+1.8%) displayed positive paces of growth. Moreover, Turkey emerged as the fastest-growing exporter exported in the world, with a CAGR of +12.7% from 2012-2021. Japan experienced a relatively flat trend pattern. Vietnam (+1.5 p.p.) significantly strengthened its position in terms of the global exports, while the shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, China ($X), Germany ($X) and Taiwan (Chinese) ($X) constituted the countries with the highest levels of exports in 2021, together comprising 47% of total exports. These countries were followed by the United States, Japan, Italy, the Netherlands, South Korea, Vietnam, India, Poland, Turkey and Thailand, which together accounted for a further 30%.
Vietnam, with a CAGR of +14.7%, recorded the highest growth rate of the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2021, the export price in Puerto Rico amounted to less than $X per ton, almost unchanged from the previous year. Overall, the export price saw a relatively flat trend pattern.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Japan ($X per ton), while Vietnam ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by China (+3.7%), while the other leaders experienced more modest paces of growth.
Nail And Bolt Imports
Imports into Puerto Rico
In 2021, approx. less than X kg of nails, tacks, staples, screws and bolts were imported into Puerto Rico; stabilizing at 2020. Over the period under review, imports recorded a relatively flat trend pattern.
In value terms, nail and bolt imports stood at less than $X in 2021. In general, imports continue to indicate a relatively flat trend pattern.
Imports by Country
In 2021, the United States (X tons), followed by Canada (X tons) and Germany (X tons) were the main importers of nails, tacks, staples, screws and bolts, together constituting 38% of total imports. The following importers - Spain (X tons), Russia (X tons), France (X tons), the UK (X tons), Poland (X tons), the Netherlands (X tons), Italy (X tons), Japan (X tons), China (X tons) and India (X tons) - together made up 26% of total imports.
From 2012 to 2021, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Spain (with a CAGR of +12.0%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the United States ($X), Germany ($X) and China ($X) were the countries with the highest levels of imports in 2021, together accounting for 29% of total imports. These countries were followed by France, Canada, the UK, the Netherlands, Italy, Poland, Russia, Japan, Spain and India, which together accounted for a further 26%.
In terms of the main importing countries, Poland, with a CAGR of +7.7%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2021, the import price in Puerto Rico amounted to less than $X per ton, remaining relatively unchanged against the previous year. In general, the import price showed a relatively flat trend pattern.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was China ($X per ton), while Canada ($X per ton) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Russia (+2.6%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the nail and bolt market in Puerto Rico. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25931410 -
- Prodcom 25931480 -
- Prodcom 25941113 - Screws, turned from bars, rods, profiles, or wire, of a shank thickness . 6 mm
- Prodcom 25941115 - Other screws and bolts for fixing railway truck construction material, iron or steel
- Prodcom 25941117 - Screws and bolts without heads in steel
- Prodcom 25941123 - Slotted and cross-recessed screws of stainless steel
- Prodcom 25941125 - Other screws and bolts with heads
- Prodcom 25941127 - Hexagon socket head screws of stainless steel
- Prodcom 25941129 - Other hexagon socket head screws
- Prodcom 25941131 - Stainless steel hexagon bolts with heads
- Prodcom 25941133 - Iron or steel hexagon bolts with heads, with a tensile strength < .800 MPa (excluding of stainless steel)
- Prodcom 25941135 - Iron or steel hexagon bolts with heads, with a tensile strength. .800 MPa (excluding of stainless steel)
- Prodcom 25941139 - Iron or steel bolts with heads (excluding hexagon bolts)
- Prodcom 25941153 - Iron or steel wood screws
- Prodcom 25941157 - Iron or steel screw hooks and screw rings
- Prodcom 25941173 - Stainless steel self-tapping screws (excluding threaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941175 - Iron or steel self-tapping screws (excluding of stainless steel, t hreaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941183 - Iron or steel nuts turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm
- Prodcom 25941185 - Stainless steel nuts (excluding those turned from bars, rods, p rofiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941187 - Iron or steel nuts (including self-locking nuts) (excluding of stainless steel, turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941190 - Threaded articles, n.e.c., of iron or steel
- Prodcom 25941210 - Iron or steel spring washers and other lock washers
- Prodcom 25941230 - Iron or steel washers (excluding spring washers and other lock washers)
- Prodcom 25941250 - Iron or steel rivets (including partly hollow rivets) (excluding tubular or bifurcated rivets for all purposes)
- Prodcom 25941270 - Iron or steel cotters and cotter-pins and similar non-threaded articles (excluding washers, rivets)
- Prodcom 25941310 - Washers, rivets, cotters, cotter pins and the like, not threaded, of copper
- Prodcom 25941340 - Copper screws, bolts and nuts (excluding pointed screw nails, s crew stoppers, threaded mechanisms used to transmit motion/to act as active machinery part, screw hooks, rings)
- Prodcom 25941370 - Threaded articles of copper, n.e.c.
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Puerto Rico
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption In 2012-2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Origin, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Destination, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2024
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2024
- Trade Balance, In Physical Terms, 2012-2024
- Trade Balance, In Value Terms, 2012-2024
- Per Capita Consumption, 2012-2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Origin, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Destination, 2012–2024
Recommended reports
This report provides an in-depth analysis of the nail and bolt market in Asia.
This report provides an in-depth analysis of the global nail and bolt market.
This report provides an in-depth analysis of the nail and bolt market in the EU.
This report provides an in-depth analysis of the nail and bolt market in the U.S..
This report provides an in-depth analysis of the nail and bolt market in China.
- Market Research in Puerto Rico
- Nail and Bolt Market
- Aluminium Window and Door Market
- Sanitary Alluminium Ware Market
- Plastic Floor Market
- Marble Building Stone Market
- Central Heating Boilers Market
- Cement Prefabricated Structural Components Market
- Float Glass and Surface Ground or Polished Glass Market
- Wooden Window Market