SADC: Market for Prefabricated Buildings Of Plastics, Concrete Or Aluminium 2024

Market Size for Prefabricated Buildings Of Plastics, Concrete Or Aluminium in SADC

The SADC market for prefabricated buildings of plastics, concrete or aluminium dropped slightly to $X in 2021, reducing by -1.6% against the previous year. Over the period under review, consumption, however, saw a relatively flat trend pattern. As a result, consumption attained the peak level of $X. From 2017 to 2021, the growth of the market remained at a lower figure.

Production of Prefabricated Buildings Of Plastics, Concrete Or Aluminium in SADC

In value terms, production of prefabricated buildings of plastics, concrete or aluminium reduced dramatically to $X in 2021 estimated in export price. Over the period under review, production recorded a drastic downturn. The most prominent rate of growth was recorded in 2020 when the production volume increased by 58% against the previous year. Over the period under review, production of attained the maximum level at $X in 2012; however, from 2013 to 2021, production failed to regain momentum.

Exports of Prefabricated Buildings Of Plastics, Concrete Or Aluminium

Exports in SADC

In 2021, the amount of prefabricated buildings of plastics, concrete or aluminium exported in SADC skyrocketed to X tons, jumping by 24% against 2020. Over the period under review, exports, however, recorded a perceptible slump. Over the period under review, the exports of hit record highs at X tons in 2012; however, from 2013 to 2021, the exports failed to regain momentum.

In value terms, exports of prefabricated buildings of plastics, concrete or aluminium surged to $X in 2021. In general, exports, however, recorded a abrupt curtailment. The pace of growth appeared the most rapid in 2017 with an increase of 41% against the previous year. Over the period under review, the exports of reached the peak figure at $X in 2012; however, from 2013 to 2021, the exports failed to regain momentum.

Exports by Country

South Africa dominates aluminium structure, recording X tons, which was approx. 91% of total exports in 2021. The following exporters - Lesotho (X tons) and Madagascar (X tons) - each reached a 3.8% share of total exports.

Exports from South Africa decreased at an average annual rate of -3.1% from 2012 to 2021. At the same time, Lesotho (+19.5%) and Madagascar (+16.9%) displayed positive paces of growth. Moreover, Lesotho emerged as the fastest-growing exporter exported in SADC, with a CAGR of +19.5% from 2012-2021. From 2012 to 2021, the share of Lesotho increased by +1.9 percentage points. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, South Africa ($X) remains the largest prefabricated buildings of plastics, concrete or aluminium supplier in SADC, comprising 92% of total exports. The second position in the ranking was taken by Lesotho ($X), with a 2.1% share of total exports.

From 2012 to 2021, the average annual rate of growth in terms of value in South Africa totaled -6.2%. The remaining exporting countries recorded the following average annual rates of exports growth: Lesotho (+32.4% per year) and Madagascar (+7.4% per year).

Export Prices by Country

In 2021, the export price in SADC amounted to $X per ton, rising by 3.6% against the previous year. Overall, the export price, however, saw a noticeable slump. The pace of growth was the most pronounced in 2020 an increase of 27%. The level of export peaked at $X per ton in 2012; however, from 2013 to 2021, the export prices failed to regain momentum.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was South Africa ($X per ton), while Madagascar ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Lesotho (+10.8%), while the other leaders experienced a decline in the export price figures.

Imports of Prefabricated Buildings Of Plastics, Concrete Or Aluminium

Imports in SADC

In 2021, after four years of decline, there was significant growth in purchases abroad of prefabricated buildings of plastics, concrete or aluminium, when their volume increased by 44% to X tons. Overall, imports, however, saw a noticeable curtailment. The most prominent rate of growth was recorded in 2016 with an increase of 4,521%. As a result, imports reached the peak of X tons. From 2017 to 2021, the growth of imports of remained at a lower figure.

In value terms, imports of prefabricated buildings of plastics, concrete or aluminium surged to $X in 2021. In general, imports, however, recorded a perceptible decrease. Over the period under review, imports of attained the maximum at $X in 2013; however, from 2014 to 2021, imports remained at a lower figure.

Imports by Country

In 2021, Tanzania (X tons), distantly followed by Democratic Republic of the Congo (X tons), Angola (X tons), Mozambique (X tons), Malawi (X tons), South Africa (X tons), Botswana (X tons), Mauritius (X tons), Zimbabwe (X tons) and Lesotho (X tons) were the key importers of prefabricated buildings of plastics, concrete or aluminium, together making up 91% of total imports.

From 2012 to 2021, average annual rates of growth with regard to prefabricated buildings of plastics, concrete or aluminium imports into Tanzania stood at +5.5%. At the same time, Lesotho (+11.9%), Mauritius (+11.4%), Botswana (+8.4%), Malawi (+4.7%), Zimbabwe (+2.7%) and Mozambique (+1.5%) displayed positive paces of growth. Moreover, Lesotho emerged as the fastest-growing importer imported in SADC, with a CAGR of +11.9% from 2012-2021. By contrast, Democratic Republic of the Congo (-2.8%), South Africa (-8.2%) and Angola (-14.9%) illustrated a downward trend over the same period. From 2012 to 2021, the share of Tanzania, Botswana, Mauritius, Lesotho, Malawi, Mozambique and Zimbabwe increased by +13, +4.1, +3.5, +3.4, +3.4, +2.8 and +1.9 percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest prefabricated buildings of plastics, concrete or aluminium importing markets in SADC were Mozambique ($X), Tanzania ($X) and Angola ($X), with a combined 51% share of total imports. South Africa, Democratic Republic of the Congo, Botswana, Mauritius, Malawi, Zimbabwe and Lesotho lagged somewhat behind, together comprising a further 40%.

In terms of the main importing countries, Mauritius, with a CAGR of +12.5%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The import price in SADC stood at $X per ton in 2021, increasing by 5.1% against the previous year. In general, the import price saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2018 an increase of 3,309%. Over the period under review, import prices attained the maximum in 2021 and is expected to retain growth in years to come.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Mozambique ($X per ton), while Tanzania ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Mozambique (+9.6%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Platform