South Africa - Plastic Tubes, Pipes and Hoses, and Fitting - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSouth Africa: Market for Plastics Tubes, Pipes And Hoses, And Fitting 2024
Market Size for Plastics Tubes, Pipes And Hoses, And Fitting in South Africa
In 2022, the South African plastic pipe and hose market decreased by X% to $X, falling for the fourth year in a row after two years of growth. Over the period under review, consumption, however, saw a relatively flat trend pattern. Plastic pipe and hose consumption peaked at $X in 2018; however, from 2019 to 2022, consumption stood at a somewhat lower figure.
Production of Plastics Tubes, Pipes And Hoses, And Fitting in South Africa
In value terms, plastic pipe and hose production shrank slightly to $X in 2022 estimated in export price. In general, production, however, continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2017 with an increase of X%. Over the period under review, production hit record highs at $X in 2018; afterwards, it flattened through to 2022.
Exports of Plastics Tubes, Pipes And Hoses, And Fitting
Exports from South Africa
For the third consecutive year, South Africa recorded growth in shipments abroad of plastics tubes, pipes and hoses, and fitting, which increased by X% to X tons in 2022. The total export volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. The exports peaked in 2022 and are likely to see gradual growth in the immediate term.
In value terms, plastic pipe and hose exports surged to $X in 2022. Over the period under review, exports saw a relatively flat trend pattern. The growth pace was the most rapid in 2021 when exports increased by X%. Over the period under review, the exports hit record highs in 2022 and are likely to continue growth in the near future.
Exports by Country
Democratic Republic of the Congo (X tons), Botswana (X tons) and Zimbabwe (X tons) were the main destinations of plastic pipe and hose exports from South Africa, together accounting for X% of total exports. Mozambique, Zambia, Swaziland, Namibia and Angola lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for Swaziland (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest markets for plastic pipe and hose exported from South Africa were Democratic Republic of the Congo ($X), Swaziland ($X) and Mozambique ($X), with a combined X% share of total exports.
Swaziland, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced mixed trend patterns.
Export Prices by Country
The average plastic pipe and hose export price stood at $X per ton in 2022, growing by X% against the previous year. In general, the export price, however, continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 an increase of X%. Over the period under review, the average export prices attained the peak figure at $X per ton in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Angola ($X per ton), while the average price for exports to Botswana ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Namibia (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Plastics Tubes, Pipes And Hoses, And Fitting
Imports into South Africa
In 2022, approx. X tons of plastics tubes, pipes and hoses, and fitting were imported into South Africa; waning by X% on 2021 figures. Over the period under review, imports saw a noticeable decrease. The most prominent rate of growth was recorded in 2019 with an increase of X%. As a result, imports attained the peak of X tons. From 2020 to 2022, the growth of imports failed to regain momentum.
In value terms, plastic pipe and hose imports contracted to $X in 2022. Overall, imports saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 with an increase of X%. As a result, imports attained the peak of $X, and then reduced in the following year.
Imports by Country
Botswana (X tons), China (X tons) and Italy (X tons) were the main suppliers of plastic pipe and hose imports to South Africa, together accounting for X% of total imports. Argentina, France, Spain, the UK, Poland, Germany, India, Switzerland and Israel lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Poland (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest plastic pipe and hose suppliers to South Africa were China ($X), Botswana ($X) and Italy ($X), with a combined X% share of total imports. Germany, the UK, Switzerland, France, Poland, Spain, Israel, Argentina and India lagged somewhat behind, together comprising a further X%.
Among the main suppliers, Poland, with a CAGR of X%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average plastic pipe and hose import price amounted to $X per ton, picking up by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The pace of growth appeared the most rapid in 2021 when the average import price increased by X% against the previous year. The import price peaked in 2022 and is expected to retain growth in the immediate term.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per ton), while the price for Botswana ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the UK (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic pipe and hose in South Africa. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212153 - Rigid tubes, pipes and hoses of polymers of ethylene
- Prodcom 22212155 - Rigid tubes, pipes and hoses of polymers of propylene
- Prodcom 22212157 - Rigid tubes, pipes and hoses of polymers of vinyl chloride
- Prodcom 22212170 - Rigid tubes, pipes and hoses of plastics (excluding of polymers of ethylene, of polymers of propylene, of polymers of vinyl chloride)
- Prodcom 22212920 - Flexible tubes, pipes and hoses of plastics, with a burst pressure . .27,6 MPa
- Prodcom 22212935 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings
- Prodcom 22212937 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors
- Prodcom 22212950 - Plastic tubes, pipes and hoses (excluding artificial guts, s ausage skins, rigid, flexible tubes and pipes having a minimum burst pressure of .27,6 MPa)
- Prodcom 22212970 - Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, p ipes and hoses
Country coverage:
- South Africa
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in South Africa
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic pipe and hose in Asia.
This report provides an in-depth analysis of the market for plastic pipe and hose in the U.S..
This report provides an in-depth analysis of the market for plastic pipe and hose in China.
This report provides an in-depth analysis of the market for plastic pipe and hose in the EU.
This report provides an in-depth analysis of the global market for plastic pipe and hose.
- Market Research in South Africa
- Plastic Pipe and Hose Market
- Plastic Self-adhesive Plate Market
- Plastic Bath or Sink Market
- Plastic Sanitary Ware Market
- Plastic Lavatory Seat Market
- Ethylene Polymer Bag Market
- Plastic Supports Market
- Plastic Tableware and Kitchenware Market
- Plastic Household Ware Market