South-Eastern Asia - Iron or Steel Solid Fuel Domestic Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSouth-Eastern Asia: Market for Iron Or Steel Solid Fuel Domestic Appliances 2025
Market Size for Iron Or Steel Solid Fuel Domestic Appliances in South-Eastern Asia
The Southeast Asian metal solid fuel appliances market dropped to $X in 2022, which is down by -5.1% against the previous year. In general, consumption recorded a pronounced reduction. Over the period under review, the market attained the maximum level at $X in 2012; however, from 2013 to 2022, consumption stood at a somewhat lower figure.
Production of Iron Or Steel Solid Fuel Domestic Appliances in South-Eastern Asia
In value terms, metal solid fuel appliances production declined slightly to $X in 2022 estimated in export price. Over the period under review, production recorded a pronounced slump. The most prominent rate of growth was recorded in 2015 with an increase of 18% against the previous year. Over the period under review, production reached the peak level at $X in 2012; however, from 2013 to 2022, production stood at a somewhat lower figure.
Exports of Iron Or Steel Solid Fuel Domestic Appliances
Exports in South-Eastern Asia
In 2022, after two years of growth, there was significant decline in overseas shipments of iron or steel solid fuel domestic appliances, when their volume decreased by -37.1% to X units. Overall, exports, however, continue to indicate a resilient increase. The growth pace was the most rapid in 2021 when exports increased by 295% against the previous year. As a result, the exports reached the peak of X units, and then contracted rapidly in the following year.
In value terms, metal solid fuel appliances exports reduced markedly to $X in 2022. In general, exports, however, recorded significant growth. The pace of growth appeared the most rapid in 2021 with an increase of 626%. As a result, the exports attained the peak of $X, and then dropped dramatically in the following year.
Exports by Country
Vietnam was the largest exporting country with an export of around X units, which finished at 57% of total exports. Thailand (X units) took the second position in the ranking, distantly followed by Singapore (X units). All these countries together held near 41% share of total exports.
Vietnam was also the fastest-growing in terms of the iron or steel solid fuel domestic appliances exports, with a CAGR of +36.8% from 2012 to 2022. At the same time, Singapore (+10.7%) displayed positive paces of growth. Thailand experienced a relatively flat trend pattern. Vietnam (+50 p.p.) significantly strengthened its position in terms of the total exports, while Thailand saw its share reduced by -50.7% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Vietnam ($X) remains the largest metal solid fuel appliances supplier in South-Eastern Asia, comprising 84% of total exports. The second position in the ranking was taken by Thailand ($X), with a 14% share of total exports.
From 2012 to 2022, the average annual rate of growth in terms of value in Vietnam totaled +50.4%. In the other countries, the average annual rates were as follows: Thailand (+1.6% per year) and Singapore (+4.1% per year).
Export Prices by Country
In 2022, the export price in South-Eastern Asia amounted to $X per unit, declining by -6.1% against the previous year. Overall, the export price, however, posted a strong expansion. The most prominent rate of growth was recorded in 2021 when the export price increased by 84% against the previous year. As a result, the export price reached the peak level of $X per unit, and then fell in the following year.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Vietnam ($X per unit), while Singapore ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Vietnam (+9.9%), while the other leaders experienced mixed trends in the export price figures.
Imports of Iron Or Steel Solid Fuel Domestic Appliances
Imports in South-Eastern Asia
After two years of growth, overseas purchases of iron or steel solid fuel domestic appliances decreased by -38.2% to X units in 2022. Overall, imports, however, showed a prominent increase. The pace of growth was the most pronounced in 2020 when imports increased by 132% against the previous year. The volume of import peaked at X units in 2021, and then dropped significantly in the following year.
In value terms, metal solid fuel appliances imports shrank markedly to $X in 2022. Over the period under review, imports, however, posted a buoyant expansion. The pace of growth appeared the most rapid in 2018 with an increase of 72% against the previous year. As a result, imports attained the peak of $X. From 2019 to 2022, the growth of imports remained at a somewhat lower figure.
Imports by Country
Thailand dominates imports structure, finishing at X units, which was near 75% of total imports in 2022. The Philippines (X units) held a 9.1% share (based on physical terms) of total imports, which put it in second place, followed by Singapore (8.6%). Malaysia (X units) and Brunei Darussalam (X units) followed a long way behind the leaders.
Thailand was also the fastest-growing in terms of the iron or steel solid fuel domestic appliances imports, with a CAGR of +20.7% from 2012 to 2022. At the same time, Malaysia (+3.9%) and Singapore (+1.4%) displayed positive paces of growth. By contrast, Brunei Darussalam (-4.7%) and the Philippines (-25.8%) illustrated a downward trend over the same period. While the share of Thailand (+30 p.p.) and the Philippines (+9.1 p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Malaysia (-7.4 p.p.), Brunei Darussalam (-9 p.p.) and Singapore (-21.1 p.p.) displayed negative dynamics.
In value terms, Malaysia ($X) constitutes the largest market for imported iron or steel solid fuel domestic appliances in South-Eastern Asia, comprising 58% of total imports. The second position in the ranking was held by Thailand ($X), with a 13% share of total imports. It was followed by the Philippines, with an 11% share.
In Malaysia, metal solid fuel appliances imports expanded at an average annual rate of +5.6% over the period from 2012-2022. The remaining importing countries recorded the following average annual rates of imports growth: Thailand (+5.1% per year) and the Philippines (-13.9% per year).
Import Prices by Country
In 2022, the import price in South-Eastern Asia amounted to $X per unit, surging by 3.5% against the previous year. In general, the import price, however, showed a abrupt descent. The pace of growth was the most pronounced in 2018 an increase of 95%. Over the period under review, import prices hit record highs at $X per unit in 2013; however, from 2014 to 2022, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Malaysia ($X per unit), while Thailand ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Philippines (+16.0%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for metal solid fuel appliances in South-Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 27521270 - Iron or steel solid fuel domestic appliances, including heaters, g rates, fires and braziers (excluding cooking appliances and plate warmers)
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
- Lao People's Democratic Republic
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in South-Eastern Asia, split by region and country
- Trade (exports and imports) in South-Eastern Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption, By Country, 2018–2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Destination, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Origin, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Consumption, By Country, 2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Production, By Country, 2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, 2012–2024
Recommended reports
This report provides an in-depth analysis of the market for metal solid fuel appliances in Asia.
This report provides an in-depth analysis of the market for metal solid fuel appliances in the U.S..
This report provides an in-depth analysis of the market for metal solid fuel appliances in China.
This report provides an in-depth analysis of the market for metal solid fuel appliances in the EU.
This report provides an in-depth analysis of the global market for metal solid fuel appliances.
- Metal Solid Fuel Appliances Market
- Electric Blanket Market
- Table Market
- Ventilating or Eecycling Hoods Incorporating A Fan Market
- Combined Refrigerator-freezer Market
- Refrigerator and Freezer Market
- Non-combined Refrigerator-freezer Market
- Domestic Appliances Market
- Vacuum Cleaner Without Motor Market
- Food Mixer Market