Report Update Nov 1, 2024

Sweden - Extruders for Working Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights

Single report

Sent by email within 24h (Mon-Fri)

$599 Basic Edition

$2095 Professional Edition

What's the difference?

Subscription

Online access and download

from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

Sweden: Plastic Extruder Market 2024

Plastic Extruder Market Size in Sweden

For the fourth consecutive year, the Swedish plastic extruder market recorded decline in sales value, which decreased by -55.3% to $X in 2021. In general, consumption, however, saw a significant expansion. Over the period under review, the market attained the maximum level at $X in 2017; however, from 2018 to 2021, consumption remained at a lower figure.

Plastic Extruder Exports

Exports from Sweden

In 2021, overseas shipments of extruders for working rubber or plastics were finally on the rise to reach X units after two years of decline. In general, exports, however, showed a mild contraction. The pace of growth was the most pronounced in 2015 with an increase of 875% against the previous year. The exports peaked at X units in 2018; however, from 2019 to 2021, the exports stood at a somewhat lower figure.

In value terms, plastic extruder exports skyrocketed to $X in 2021. Over the period under review, exports, however, saw a abrupt decline. The growth pace was the most rapid in 2015 when exports increased by 449% against the previous year. The exports peaked at $X in 2013; however, from 2014 to 2021, the exports stood at a somewhat lower figure.

Exports by Country

South Korea (X units) was the main destination for plastic extruder exports from Sweden, with a 78% share of total exports. Moreover, plastic extruder exports to South Korea exceeded the volume sent to the second major destination, Denmark (X units), ninefold. The third position in this ranking was held by Norway (X units), with a 7.9% share.

From 2012 to 2021, the average annual rate of growth in terms of volume to South Korea totaled +48.2%. Exports to the other major destinations recorded the following average annual rates of exports growth: Denmark (0.0% per year) and Norway (+4.3% per year).

In value terms, South Korea ($X) emerged as the key foreign market for extruders for working rubber or plastics exports from Sweden, comprising 59% of total exports. The second position in the ranking was held by Denmark ($X), with a 26% share of total exports. It was followed by Norway, with a 12% share.

From 2012 to 2021, the average annual rate of growth in terms of value to South Korea stood at +8.2%. Exports to the other major destinations recorded the following average annual rates of exports growth: Denmark (+2,193.3% per year) and Norway (-14.7% per year).

Export Prices by Country

The average plastic extruder export price stood at $X per unit in 2021, which is down by -70.5% against the previous year. In general, the export price recorded a abrupt descent. The pace of growth appeared the most rapid in 2013 an increase of 913%. As a result, the export price attained the peak level of $X per unit. From 2014 to 2021, the average export prices remained at a somewhat lower figure.

There were significant differences in the average prices for the major external markets. In 2021, the country with the highest price was the United Arab Emirates ($X per unit), while the average price for exports to South Korea ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Denmark (+159.3%), while the prices for the other major destinations experienced more modest paces of growth.

Plastic Extruder Imports

Imports into Sweden

In 2021, plastic extruder imports into Sweden fell markedly to X units, with a decrease of -39.3% compared with the previous year. Overall, imports, however, posted a strong expansion. The pace of growth was the most pronounced in 2017 when imports increased by 843% against the previous year. As a result, imports attained the peak of X units. From 2018 to 2021, the growth of imports remained at a somewhat lower figure.

In value terms, plastic extruder imports reduced remarkably to $X in 2021. Over the period under review, imports recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2016 with an increase of 157%. Imports peaked at $X in 2020, and then dropped remarkably in the following year.

Imports by Country

Germany (X units), Italy (X units) and Finland (X units) were the main suppliers of plastic extruder imports to Sweden, with a combined 96% share of total imports.

From 2012 to 2021, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Finland (with a CAGR of +30.5%), while imports for the other leaders experienced more modest paces of growth.

In value terms, Germany ($X), Italy ($X) and Finland ($X) constituted the largest plastic extruder suppliers to Sweden, with a combined 95% share of total imports.

Among the main suppliers, Finland, with a CAGR of +34.7%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2021, the average plastic extruder import price amounted to $X per unit, declining by -7.7% against the previous year. In general, the import price saw a deep downturn. The pace of growth appeared the most rapid in 2016 an increase of 1,967%. Over the period under review, average import prices hit record highs at $X per unit in 2012; however, from 2013 to 2021, import prices failed to regain momentum.

Prices varied noticeably country of origin: the country with the highest price was Canada ($X per unit), while the price for China ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Canada (+104.0%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for extruders for working rubber or plastics in the world?

The countries with the highest volumes of plastic extruder consumption in 2020 were China, Germany and India, with a combined 32% share of global consumption. The United States, Turkey, Pakistan, South Korea, the UK, Brazil, Thailand, Indonesia, Vietnam and Russia lagged somewhat behind, together comprising a further 33%.

What are the largest producers of extruders for working rubber or plastics in the world?

The countries with the highest volumes of plastic extruder production in 2020 were China, Germany and India, with a combined 49% share of global production. These countries were followed by the United States, Taiwan Chinese), the UK, Pakistan, Japan, Brazil, Italy and Mexico, which together accounted for a further 34%.

What are the leading suppliers of extruders for working rubber or plastics to Sweden?

In value terms, Germany constituted the largest supplier of plastic extruder to Sweden, comprising 68% of total imports. The second position in the ranking was occupied by Italy, with an 11% share of total imports. It was followed by Turkey, with a 6.5% share.

What are the leading importers of extruders for working rubber or plastics from Sweden?

In value terms, Denmark emerged as the key foreign market for plastic extruder exports from Sweden, comprising 77% of total exports. The second position in the ranking was occupied by Switzerland, with a 16% share of total exports. It was followed by North Macedonia, with a 2.8% share.

What is the average export price for extruders for working rubber or plastics in Sweden?

The average plastic extruder export price stood at $8,846 per unit in 2020, with a decrease of -14.6% against the previous year.

What is the average import price for extruders for working rubber or plastics in Sweden?

In 2020, the average plastic extruder import price amounted to $35,274 per unit, surging by 818% against the previous year.

This report provides an in-depth analysis of the plastic extruder market in Sweden. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

Prodcom 28961030 - Extruders for working rubber or plastics, or for manufacturing rubber or plastic products

Country coverage:

Sweden

Data coverage:

Market volume and value
Per Capita consumption
Forecast of the market dynamics in the medium term
Trade (exports and imports) in Sweden
Export and import prices
Market trends, drivers and restraints
Key market players and their profiles

Reasons to buy this report:

Take advantage of the latest data
Find deeper insights into current market developments
Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

How to diversify your business and benefit from new market opportunities
How to load your idle production capacity
How to boost your sales on overseas markets
How to increase your profit margins
How to make your supply chain more sustainable
How to reduce your production and supply chain costs
How to outsource production to other countries
How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business
1. REPORT DESCRIPTION
2. RESEARCH METHODOLOGY AND AI PLATFORM
3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
4. GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance
1. KEY FINDINGS
2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects
1. MARKET SIZE
2. MARKET STRUCTURE
3. TRADE BALANCE
4. PER CAPITA CONSUMPTION
5. MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCT

Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO
1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
2. BEST-SELLING PRODUCTS
3. MOST CONSUMED PRODUCT
4. MOST TRADED PRODUCT
5. MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO
1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
2. TOP PRODUCING COUNTRIES
3. TOP EXPORTING COUNTRIES
4. LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO
1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
2. TOP CONSUMING MARKETS
3. UNSATURATED MARKETS
4. TOP IMPORTING MARKETS
5. MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry
1. PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
1. IMPORTS FROM 2012–2023
2. IMPORTS BY COUNTRY
3. IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
1. EXPORTS FROM 2012–2023
2. EXPORTS BY COUNTRY
3. EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO
LIST OF TABLES
1. Key Findings In 2023
2. Market Volume, In Physical Terms, 2012–2023
3. Market Value, 2012–2023
4. Per Capita Consumption In 2012-2023
5. Imports, In Physical Terms, By Country, 2012–2023
6. Imports, In Value Terms, By Country, 2012–2023
7. Import Prices, By Country Of Origin, 2012–2023
8. Exports, In Physical Terms, By Country, 2012–2023
9. Exports, In Value Terms, By Country, 2012–2023
10. Export Prices, By Country Of Destination, 2012–2023
LIST OF FIGURES
1. Market Volume, In Physical Terms, 2012–2023
2. Market Value, 2012–2023
3. Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
4. Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
5. Trade Balance, In Physical Terms, 2012-2023
6. Trade Balance, In Value Terms, 2012-2023
7. Per Capita Consumption, 2012-2023
8. Market Volume Forecast to 2030
9. Market Value Forecast to 2030
10. Products: Market Size And Growth, By Type
11. Products: Average Per Capita Consumption, By Type
12. Products: Exports And Growth, By Type
13. Products: Export Prices And Growth, By Type
14. Production Volume And Growth
15. Exports And Growth
16. Export Prices And Growth
17. Market Size And Growth
18. Per Capita Consumption
19. Imports And Growth
20. Import Prices
21. Production, In Physical Terms, 2012–2023
22. Production, In Value Terms, 2012–2023
23. Imports, In Physical Terms, 2012–2023
24. Imports, In Value Terms, 2012–2023
25. Imports, In Physical Terms, By Country, 2023
26. Imports, In Physical Terms, By Country, 2012–2023
27. Imports, In Value Terms, By Country, 2012–2023
28. Import Prices, By Country Of Origin, 2012–2023
29. Exports, In Physical Terms, 2012–2023
30. Exports, In Value Terms, 2012–2023
31. Exports, In Physical Terms, By Country, 2023
32. Exports, In Physical Terms, By Country, 2012–2023
33. Exports, In Value Terms, By Country, 2012–2023
34. Export Prices, By Country Of Destination, 2012–2023