
Sweden - Iron, Steel or Aluminium Reservoirs, Tanks, Vats and Similar Containers - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSweden: Market for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers 2021
Market Size for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Sweden
After three years of decline, the Swedish market for iron, steel or aluminium reservoirs, tanks, vats and similar containers increased by X% to $X in 2020. Overall, consumption posted resilient growth. As a result, consumption attained the peak level and is likely to continue growth in the immediate term.
Production of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Sweden
In value terms, iron, steel or aluminium reservoir production expanded to $X in 2020 estimated in export prices. In general, production saw a abrupt decline. The pace of growth appeared the most rapid in 2014 with an increase of X% year-to-year. Iron, steel or aluminium reservoir production peaked at $X in 2007; however, from 2008 to 2020, production remained at a lower figure.
Exports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Exports from Sweden
In 2020, after three years of growth, there was significant decline in overseas shipments of iron, steel or aluminium reservoirs, tanks, vats and similar containers, when their volume decreased by -X% to X tons. In general, exports continue to indicate a slight slump. The pace of growth appeared the most rapid in 2011 when exports increased by X% against the previous year. Exports peaked at X tons in 2015; however, from 2016 to 2020, exports stood at a somewhat lower figure.
In value terms, iron, steel or aluminium reservoir exports dropped significantly to $X in 2020. Over the period under review, exports recorded a deep contraction. The most prominent rate of growth was recorded in 2011 with an increase of X% y-o-y. Exports peaked at $X in 2008; however, from 2009 to 2020, exports failed to regain the momentum.
Exports by Country
Norway (X tons) was the main destination for iron, steel or aluminium reservoir exports from Sweden, accounting for a X% share of total exports. Moreover, iron, steel or aluminium reservoir exports to Norway exceeded the volume sent to the second major destination, Denmark (X tons), more than tenfold. Thailand (X tons) ranked third in terms of total exports with a X% share.
From 2007 to 2020, the average annual growth rate of volume to Norway totaled -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Denmark (-X% per year) and Thailand (+X% per year).
In value terms, Norway ($X) remains the key foreign market for iron, steel or aluminium reservoir exports from Sweden, comprising X% of total exports. The second position in the ranking was occupied by Denmark ($X), with a X% share of total exports. It was followed by Finland, with a X% share.
From 2007 to 2020, the average annual rate of growth in terms of value to Norway stood at -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Denmark (-X% per year) and Finland (-X% per year).
Export Prices by Country
The average export price for iron, steel or aluminium reservoirs, tanks, vats and similar containers stood at $X per ton in 2020, reducing by -X% against the previous year. Overall, the export price recorded a abrupt curtailment. The most prominent rate of growth was recorded in 2008 an increase of X% year-to-year. Over the period under review, average export prices reached the maximum at $X per ton in 2009; however, from 2010 to 2020, export prices failed to regain the momentum.
There were significant differences in the average prices for the major export markets. In 2020, the country with the highest price was Finland ($X per ton), while the average price for exports to Thailand ($X per ton) was amongst the lowest.
From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to Finland, while the prices for the other major destinations experienced a decline.
Imports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Imports into Sweden
In 2020, approx. X tons of iron, steel or aluminium reservoirs, tanks, vats and similar containers were imported into Sweden; waning by -X% against 2019 figures. In general, imports continue to indicate a slight reduction. The pace of growth was the most pronounced in 2010 when imports increased by X% against the previous year. Over the period under review, imports hit record highs at X tons in 2008; however, from 2009 to 2020, imports remained at a lower figure.
In value terms, iron, steel or aluminium reservoir imports rose significantly to $X in 2020. Over the period under review, imports saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2008 when imports increased by X% year-to-year. As a result, imports reached the peak of $X. from 2009 to 2020, the growth imports remained at a somewhat lower figure.
Imports by Country
In 2020, Norway (X tons) constituted the largest iron, steel or aluminium reservoir supplier to Sweden, accounting for a X% share of total imports. Moreover, iron, steel or aluminium reservoir imports from Norway exceeded the figures recorded by the second-largest supplier, Poland (X tons), fourfold. The third position in this ranking was occupied by Germany (X tons), with a X% share.
From 2007 to 2020, the average annual rate of growth in terms of volume from Norway was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Poland (-X% per year) and Germany (-X% per year).
In value terms, the largest iron, steel or aluminium reservoir suppliers to Sweden were Germany ($X), Poland ($X) and the Netherlands ($X), together comprising X% of total imports.
The Netherlands recorded the highest growth rate of the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2020, the average import price for iron, steel or aluminium reservoirs, tanks, vats and similar containers amounted to $X per ton, increasing by X% against the previous year. Over the last thirteen years, it increased at an average annual rate of +X%. The pace of growth appeared the most rapid in 2008 an increase of X% against the previous year. Over the period under review, average import prices attained the peak figure in 2020 and is likely to continue growth in the near future.
Prices varied noticeably by the country of origin; the country with the highest price was Denmark ($X per ton), while the price for Norway ($X per ton) was amongst the lowest.
From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Denmark, while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Sweden. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.
Product coverage:
- Prodcom 25291110 - Iron or steel reservoirs, tanks, vats and similar containers for gases, of a capacity > .300 litres (excluding compressed or liquefied gas, fitted with mechanical or thermal equipment)
- Prodcom 25291120 - Iron or steel reservoirs, tanks, vats and similar containers lined or heat-insulated, for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291130 - Iron or steel reservoirs, tanks, vats and similar containers for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment, lined or heat insulated)
- Prodcom 25291150 - Iron or steel reservoirs, tanks, vats and similar containers for solids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291170 - Aluminium reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291200 - Containers for compressed or liquefied gas, of metal
Country coverage:
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Sweden
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND THE AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDSThis Chapter is Available Only for the Professional EditionPRO
3. MARKET OVERVIEW
Understanding the Current State of The Market and its Prospects
- MARKET SIZE: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
- MARKET STRUCTURE: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
- TRADE BALANCE: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
- PER CAPITA CONSUMPTION: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
- MARKET FORECAST TO 2035
4. MOST PROMISING PRODUCTS FOR DIVERSIFICATION
Finding New Products to Diversify Your Business
- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCTS
- MOST TRADED PRODUCTS
- MOST PROFITABLE PRODUCTS FOR EXPORTS
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Export
- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
- IMPORTS BY COUNTRY: HISTORICAL DATA (2012–2024)
- IMPORT PRICES BY COUNTRY: HISTORICAL DATA (2012–2024)
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS: HISTORICAL DATA (2012–2024) AND FORECAST (2025–2035)
- EXPORTS BY COUNTRY: HISTORICAL DATA (2012–2024)
- EXPORT PRICES BY COUNTRY: HISTORICAL DATA (2012–2024)
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Market Value: Historical Data (2012–2024) and Forecast (2025–2035)
- Per Capita Consumption: Historical Data (2012–2024) and Forecast (2025–2035)
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country, 2012–2024
LIST OF FIGURES
- Market Volume, In Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Market Value: Historical Data (2012–2024) and Forecast (2025–2035)
- Market Structure – Domestic Supply vs. Imports, in Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Market Structure – Domestic Supply vs. Imports, in Value Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Trade Balance, In Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Trade Balance, In Value Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Per Capita Consumption: Historical Data (2012–2024) and Forecast (2025–2035)
- Market Volume Forecast to 2035
- Market Value Forecast to 2035
- Products: Market Size and Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports and Growth, By Type
- Products: Export Prices and Growth, By Type
- Production Volume and Growth
- Exports and Growth
- Export Prices and Growth
- Market Size and Growth
- Per Capita Consumption
- Imports and Growth
- Import Prices
- Production, In Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Production, In Value Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Imports, In Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Imports, In Value Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Exports, In Value Terms: Historical Data (2012–2024) and Forecast (2025–2035)
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country, 2012–2024
Recommended reports
This report provides an in-depth analysis of the global market for iron, steel or aluminium reservoir.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the EU.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Asia.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the U.S..
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in China.