Switzerland - Plastic Tubes, Pipes and Hoses, and Fitting - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSwitzerland: Market for Plastics Tubes, Pipes And Hoses, And Fitting 2024
Market Size for Plastics Tubes, Pipes And Hoses, And Fitting in Switzerland
The Swiss plastic pipe and hose market was estimated at $X in 2022, increasing by X% against the previous year. Overall, the total consumption indicated a buoyant expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2018 indices. Over the period under review, the market reached the maximum level in 2022 and is likely to see steady growth in the near future.
Production of Plastics Tubes, Pipes And Hoses, And Fitting in Switzerland
In value terms, plastic pipe and hose production amounted to $X in 2022 estimated in export price. Overall, the total production indicated a resilient expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2018 indices. The growth pace was the most rapid in 2016 when the production volume increased by X% against the previous year. Plastic pipe and hose production peaked at $X in 2018; however, from 2019 to 2022, production remained at a lower figure.
Exports of Plastics Tubes, Pipes And Hoses, And Fitting
Exports from Switzerland
After five years of growth, overseas shipments of plastics tubes, pipes and hoses, and fitting decreased by X% to X tons in 2022. The total export volume increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern remained consistent, with only minor fluctuations being observed throughout the analyzed period. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of X tons, and then dropped modestly in the following year.
In value terms, plastic pipe and hose exports expanded sharply to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. Over the period under review, the exports reached the maximum in 2022 and are expected to retain growth in the immediate term.
Exports by Country
Germany (X tons) was the main destination for plastic pipe and hose exports from Switzerland, with a X% share of total exports. Moreover, plastic pipe and hose exports to Germany exceeded the volume sent to the second major destination, Italy (X tons), sixfold. The third position in this ranking was taken by the Netherlands (X tons), with a X% share.
From 2012 to 2022, the average annual growth rate of volume to Germany was relatively modest. Exports to the other major destinations recorded the following average annual rates of exports growth: Italy (X% per year) and the Netherlands (X% per year).
In value terms, Germany ($X) remains the key foreign market for plastics tubes, pipes and hoses, and fitting exports from Switzerland, comprising X% of total exports. The second position in the ranking was held by Italy ($X), with a X% share of total exports. It was followed by the United States, with a X% share.
From 2012 to 2022, the average annual growth rate of value to Germany was relatively modest. Exports to the other major destinations recorded the following average annual rates of exports growth: Italy (X% per year) and the United States (X% per year).
Export Prices by Country
In 2022, the average plastic pipe and hose export price amounted to $X per ton, picking up by X% against the previous year. Over the period under review, the export price recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2013 when the average export price increased by X% against the previous year. The export price peaked at $X per ton in 2014; however, from 2015 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was the United States ($X per ton), while the average price for exports to Hungary ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to the UK (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Plastics Tubes, Pipes And Hoses, And Fitting
Imports into Switzerland
In 2022, the amount of plastics tubes, pipes and hoses, and fitting imported into Switzerland fell modestly to X tons, standing approx. at 2021. Over the period under review, imports recorded a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 with an increase of X%. Imports peaked at X tons in 2014; however, from 2015 to 2022, imports failed to regain momentum.
In value terms, plastic pipe and hose imports expanded rapidly to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. Imports peaked in 2022 and are likely to see gradual growth in years to come.
Imports by Country
Germany (X tons), Italy (X tons) and Austria (X tons) were the main suppliers of plastic pipe and hose imports to Switzerland, together comprising X% of total imports. Turkey and France lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Turkey (with a CAGR of X%), while imports for the other leaders experienced mixed trend patterns.
In value terms, Germany ($X) constituted the largest supplier of plastics tubes, pipes and hoses, and fitting to Switzerland, comprising X% of total imports. The second position in the ranking was taken by Italy ($X), with a X% share of total imports. It was followed by Austria, with a X% share.
From 2012 to 2022, the average annual growth rate of value from Germany stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (X% per year) and Austria (X% per year).
Import Prices by Country
In 2022, the average plastic pipe and hose import price amounted to $X per ton, increasing by X% against the previous year. Overall, import price indicated a moderate increase from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, plastic pipe and hose import price decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2016 when the average import price increased by X% against the previous year. Over the period under review, average import prices reached the peak figure at $X per ton in 2020; however, from 2021 to 2022, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was France ($X per ton), while the price for Turkey ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by France (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic pipe and hose in Switzerland. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212153 - Rigid tubes, pipes and hoses of polymers of ethylene
- Prodcom 22212155 - Rigid tubes, pipes and hoses of polymers of propylene
- Prodcom 22212157 - Rigid tubes, pipes and hoses of polymers of vinyl chloride
- Prodcom 22212170 - Rigid tubes, pipes and hoses of plastics (excluding of polymers of ethylene, of polymers of propylene, of polymers of vinyl chloride)
- Prodcom 22212920 - Flexible tubes, pipes and hoses of plastics, with a burst pressure . .27,6 MPa
- Prodcom 22212935 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings
- Prodcom 22212937 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors
- Prodcom 22212950 - Plastic tubes, pipes and hoses (excluding artificial guts, s ausage skins, rigid, flexible tubes and pipes having a minimum burst pressure of .27,6 MPa)
- Prodcom 22212970 - Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, p ipes and hoses
Country coverage:
- Switzerland
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Switzerland
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic pipe and hose in Asia.
This report provides an in-depth analysis of the market for plastic pipe and hose in the U.S..
This report provides an in-depth analysis of the market for plastic pipe and hose in China.
This report provides an in-depth analysis of the market for plastic pipe and hose in the EU.
This report provides an in-depth analysis of the global market for plastic pipe and hose.
- Market Research in Switzerland
- Plastic Pipe and Hose Market
- Plastic Self-adhesive Plate Market
- Plastic Bath or Sink Market
- Plastic Sanitary Ware Market
- Plastic Lavatory Seat Market
- Ethylene Polymer Bag Market
- Plastic Supports Market
- Plastic Tableware and Kitchenware Market
- Plastic Household Ware Market