United Arab Emirates: Reticle Manufacturing Machine Market 2024

Reticle Manufacturing Machine Market Size in the United Arab Emirates

In 2021, the reticle manufacturing machine market in the United Arab Emirates increased by 815% to $X, rising for the second consecutive year after four years of decline. Over the period under review, consumption, however, showed a deep setback. Reticle manufacturing machine consumption peaked at $X in 2015; however, from 2016 to 2021, consumption failed to regain momentum.

Reticle Manufacturing Machine Production in the United Arab Emirates

In value terms, reticle manufacturing machine production expanded to $X in 2021 estimated in export price. Overall, the total production indicated a slight expansion from 2012 to 2021: its value increased at an average annual rate of +1.5% over the last nine-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, production decreased by -4.1% against 2019 indices. The growth pace was the most rapid in 2013 when the production volume increased by 50%. Reticle manufacturing machine production peaked at $X in 2015; however, from 2016 to 2021, production stood at a somewhat lower figure.

Reticle Manufacturing Machine Exports

Exports from the United Arab Emirates

In 2021, shipments abroad of machines for the manufacture of masks and reticles, semiconductor devices or electronic integrated circuits decreased by -92.1% to X units, falling for the third year in a row after three years of growth. Over the period under review, exports, however, posted a significant increase. The most prominent rate of growth was recorded in 2017 when exports increased by 2,375% against the previous year. Over the period under review, the exports reached the maximum at X units in 2018; however, from 2019 to 2021, the exports stood at a somewhat lower figure.

In value terms, reticle manufacturing machine exports dropped sharply to $X in 2021. Overall, exports, however, enjoyed significant growth. The growth pace was the most rapid in 2017 when exports increased by 8,889%. Over the period under review, the exports reached the maximum at $X in 2019; however, from 2020 to 2021, the exports stood at a somewhat lower figure.

Exports by Country

Iran (X units) was the main destination for reticle manufacturing machine exports from the United Arab Emirates, with a 79% share of total exports. Moreover, reticle manufacturing machine exports to Iran exceeded the volume sent to the second major destination, Germany (X units), more than tenfold.

From 2012 to 2021, the average annual growth rate of volume to Iran amounted to +8.3%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (0.0% per year) and Yemen (-30.7% per year).

In value terms, Iran ($X) remains the key foreign market for machines for the manufacture of masks and reticles, semiconductor devices or electronic integrated circuits exports from the United Arab Emirates, comprising 76% of total exports. The second position in the ranking was held by Yemen ($X), with a 3.2% share of total exports. It was followed by Iraq, with a 0.7% share.

From 2012 to 2021, the average annual growth rate of value to Iran totaled +44.2%. Exports to the other major destinations recorded the following average annual rates of exports growth: Yemen (+71.1% per year) and Iraq (+24.3% per year).

Export Prices by Country

The average reticle manufacturing machine export price stood at $X per unit in 2021, reducing by -33.7% against the previous year. Over the period under review, the export price showed a slight reduction. The pace of growth was the most pronounced in 2017 an increase of 242%. As a result, the export price reached the peak level of $X per unit. From 2018 to 2021, the average export prices remained at a lower figure.

Prices varied noticeably country of destination: the country with the highest price was Iran ($X per unit), while the average price for exports to Germany ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Germany (+373.4%), while the prices for the other major destinations experienced mixed trend patterns.

Reticle Manufacturing Machine Imports

Imports into the United Arab Emirates

In 2021, supplies from abroad of machines for the manufacture of masks and reticles, semiconductor devices or electronic integrated circuits was finally on the rise to reach X units after three years of decline. In general, imports, however, continue to indicate a pronounced decrease. The most prominent rate of growth was recorded in 2015 with an increase of 602%. As a result, imports reached the peak of X units. From 2016 to 2021, the growth of imports failed to regain momentum.

In value terms, reticle manufacturing machine imports skyrocketed to $X in 2021. Over the period under review, imports, however, showed a abrupt setback. The growth pace was the most rapid in 2015 with an increase of 1,316%. As a result, imports reached the peak of $X. From 2016 to 2021, the growth of imports failed to regain momentum.

Imports by Country

In 2021, Taiwan (Chinese) (X units) constituted the largest reticle manufacturing machine supplier to the United Arab Emirates, with a 77% share of total imports. Moreover, reticle manufacturing machine imports from Taiwan (Chinese) exceeded the figures recorded by the second-largest supplier, China (X units), sixfold. The third position in this ranking was taken by Malaysia (X units), with a 5.2% share.

From 2012 to 2021, the average annual growth rate of volume from Taiwan (Chinese) totaled +37.7%. The remaining supplying countries recorded the following average annual rates of imports growth: China (+26.7% per year) and Malaysia (-24.7% per year).

In value terms, Taiwan (Chinese) ($X), China ($X) and Italy ($X) appeared to be the largest reticle manufacturing machine suppliers to the United Arab Emirates, with a combined 73% share of total imports.

Among the main suppliers, Taiwan (Chinese), with a CAGR of +47.0%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced mixed trend patterns.

Import Prices by Country

The average reticle manufacturing machine import price stood at $X per unit in 2021, falling by -17.1% against the previous year. In general, the import price saw a perceptible shrinkage. The most prominent rate of growth was recorded in 2015 an increase of 102% against the previous year. As a result, import price reached the peak level of $X per unit. From 2016 to 2021, the average import prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2021, the country with the highest price was Italy ($X per unit), while the price for Taiwan (Chinese) ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Italy (+18.5%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :