
Western Africa - Non-Hydraulic Presses for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingWestern Africa: Non-Hydraulic Press Market 2025
Non-Hydraulic Press Market Size in Western Africa
In 2021, after four years of growth, there was significant decline in the West African non-hydraulic press market, when its value decreased by -5.7% to $X. In general, consumption continues to indicate a deep reduction. Over the period under review, the market attained the peak level at $X in 2012; however, from 2013 to 2021, consumption failed to regain momentum.
Non-Hydraulic Press Production in Western Africa
In value terms, non-hydraulic press production fell to $X in 2021 estimated in export price. In general, production saw a deep setback. The pace of growth was the most pronounced in 2018 when the production volume increased by 22% against the previous year. The level of production peaked at $X in 2012; however, from 2013 to 2021, production stood at a somewhat lower figure.
Non-Hydraulic Press Exports
Exports in Western Africa
In 2021, shipments abroad of non-hydraulic presses for working metal increased by 7.7% to X units, rising for the third year in a row after two years of decline. Overall, exports, however, recorded a deep slump. The pace of growth was the most pronounced in 2016 with an increase of 7,033%. As a result, the exports attained the peak of X units. From 2017 to 2021, the growth of the exports remained at a somewhat lower figure.
In value terms, non-hydraulic press exports declined sharply to $X in 2021. In general, exports, however, saw a deep downturn. The pace of growth appeared the most rapid in 2013 when exports increased by 135% against the previous year. As a result, the exports attained the peak of $X. From 2014 to 2021, the growth of the exports failed to regain momentum.
Exports by Country
In 2021, Senegal (X units) was the largest exporter of non-hydraulic presses for working metal, making up 64% of total exports. Nigeria (X units) took the second position in the ranking, distantly followed by Gambia (X units) and Ghana (X units). All these countries together took near 36% share of total exports.
Exports from Senegal decreased at an average annual rate of -14.5% from 2012 to 2021. Ghana and Gambia experienced a relatively flat trend pattern. Nigeria (-16.4%) illustrated a downward trend over the same period. While the share of Ghana (+7.1 p.p.) and Gambia (+7.1 p.p.) increased significantly in terms of the total exports from 2012-2021, the share of Senegal (-6.9 p.p.) and Nigeria (-7.4 p.p.) displayed negative dynamics.
In value terms, the largest non-hydraulic press supplying countries in Western Africa were Ghana ($X), Gambia ($X) and Senegal ($X), together comprising 56% of total exports.
Among the main exporting countries, Ghana, with a CAGR of +62.1%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced mixed trends in the exports figures.
Export Prices by Country
The export price in Western Africa stood at $X per unit in 2021, shrinking by -41.7% against the previous year. In general, the export price, however, continues to indicate a buoyant expansion. The growth pace was the most rapid in 2017 when the export price increased by 5,903%. The level of export peaked at $X per unit in 2020, and then fell notably in the following year.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Ghana ($X per unit), while Nigeria ($X per unit) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Ghana (+34.7%), while the other leaders experienced a decline in the export price figures.
Non-Hydraulic Press Imports
Imports in Western Africa
In 2021, non-hydraulic press imports in Western Africa contracted remarkably to X units, with a decrease of -24.9% against the year before. Over the period under review, imports, however, posted buoyant growth. The pace of growth was the most pronounced in 2020 with an increase of 209%. As a result, imports reached the peak of X units, and then contracted rapidly in the following year.
In value terms, non-hydraulic press imports fell sharply to $X in 2021. In general, imports saw a slight slump. The most prominent rate of growth was recorded in 2020 when imports increased by 663% against the previous year. As a result, imports attained the peak of $X, and then contracted sharply in the following year.
Imports by Country
Cote d'Ivoire (X units) and Togo (X units) were the largest importers of non-hydraulic presses for working metal in 2021, finishing at near 40% and 29% of total imports, respectively. It was distantly followed by Burkina Faso (X units) and Mauritania (X units), together generating a 13% share of total imports. Nigeria (X units), Liberia (X units) and Senegal (X units) held a relatively small share of total imports.
From 2012 to 2021, the biggest increases were recorded for Togo (with a CAGR of +26.6%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest non-hydraulic press importing markets in Western Africa were Cote d'Ivoire ($X), Nigeria ($X) and Burkina Faso ($X), together accounting for 87% of total imports.
Cote d'Ivoire, with a CAGR of +19.5%, saw the highest rates of growth with regard to the value of imports, in terms of the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2021, the import price in Western Africa amounted to $X per unit, dropping by -70.3% against the previous year. Over the period under review, the import price recorded a abrupt descent. The most prominent rate of growth was recorded in 2020 when the import price increased by 147%. As a result, import price attained the peak level of $X per unit, and then fell remarkably in the following year.
There were significant differences in the average prices amongst the major importing countries. In 2021, amid the top importers, the country with the highest price was Nigeria ($X per unit), while Togo ($X per unit) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Nigeria (-1.3%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the non-hydraulic press market in Western Africa. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28413360 - Non-hydraulic presses for working metal
Country coverage:
- Benin
- Burkina Faso
- Cabo Verde
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Liberia
- Mali
- Mauritania
- Niger
- Nigeria
- Saint Helena, Ascension and Tristan da Cunha
- Senegal
- Sierra Leone
- Togo
- Cote d'Ivoire
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Western Africa, split by region and country
- Trade (exports and imports) in Western Africa
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2024
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2024
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Benin
- Burkina Faso
- Cabo Verde
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Liberia
- Mali
- Mauritania
- Niger
- Nigeria
- Saint Helena, Ascension and Tristan da Cunha
- Senegal
- Sierra Leone
- Togo
- Cote d'Ivoire
-
LIST OF TABLES
- Key Findings In 2024
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Per Capita Consumption, By Country, 2018–2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country Of Destination, 2012–2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, By Country Of Origin, 2012–2024
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2024
- Market Value, 2012–2024
- Consumption, By Country, 2024
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2024
- Production, In Value Terms, 2012–2024
- Production, By Country, 2024
- Production, In Physical Terms, By Country, 2012–2024
- Imports, In Physical Terms, 2012–2024
- Imports, In Value Terms, 2012–2024
- Imports, In Physical Terms, By Country, 2024
- Imports, In Physical Terms, By Country, 2012–2024
- Imports, In Value Terms, By Country, 2012–2024
- Import Prices, By Country, 2012–2024
- Exports, In Physical Terms, 2012–2024
- Exports, In Value Terms, 2012–2024
- Exports, In Physical Terms, By Country, 2024
- Exports, In Physical Terms, By Country, 2012–2024
- Exports, In Value Terms, By Country, 2012–2024
- Export Prices, 2012–2024
Recommended reports
This report provides an in-depth analysis of the non-hydraulic press market in Asia.
This report provides an in-depth analysis of the global non-hydraulic press market.
This report provides an in-depth analysis of the non-hydraulic press market in the EU.
This report provides an in-depth analysis of the non-hydraulic press market in the U.S..
This report provides an in-depth analysis of the non-hydraulic press market in China.
- Non-hydraulic Press Market
- Cold Metal-rolling Mill Market
- Mill Rolling Roll Market
- Machine-tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-numerically Controlled Lathe Market
- Way-type Unit Head Market