Overview of the Global Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

The global market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022, surging by 27% against the previous year. Overall, the total consumption indicated noticeable growth from 2012 to 2022: its value increased at an average annual rate of +3.8% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by +31.7% against 2020 indices. As a result, consumption reached the peak level and is likely to continue growth in the immediate term.

Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids contracted to $X in 2022 estimated in export price. In general, the total production indicated slight growth from 2012 to 2022: its value increased at an average annual rate of +1.2% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by +0.3% against 2020 indices. The most prominent rate of growth was recorded in 2017 when the production volume increased by 44%. Global production peaked at $X in 2018; however, from 2019 to 2022, production stood at a somewhat lower figure.

Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Exports

In 2022, global exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids expanded notably to X units, with an increase of 14% against 2021 figures. Over the period under review, total exports indicated perceptible growth from 2012 to 2022: its volume increased at an average annual rate of +4.6% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by +46.9% against 2019 indices. The pace of growth appeared the most rapid in 2017 with an increase of 62%. As a result, the exports reached the peak of X units. From 2018 to 2022, the growth of the global exports of remained at a somewhat lower figure.

In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids rose significantly to $X in 2022. Overall, exports, however, showed a slight slump. The most prominent rate of growth was recorded in 2021 when exports increased by 21%. The global exports peaked at $X in 2013; however, from 2014 to 2022, the exports stood at a somewhat lower figure.

Exports by Country

China was the largest exporting country with an export of around X units, which recorded 38% of total exports. It was distantly followed by Italy (X units), Turkey (X units) and Germany (X units), together committing a 30% share of total exports. India (X units), the Netherlands (X units), Australia (X units) and Spain (X units) followed a long way behind the leaders.

From 2012 to 2022, average annual rates of growth with regard to machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids exports from China stood at +10.2%. At the same time, the Netherlands (+26.2%), India (+14.2%), Italy (+7.8%), Turkey (+7.3%) and Spain (+4.1%) displayed positive paces of growth. Moreover, the Netherlands emerged as the fastest-growing exporter exported in the world, with a CAGR of +26.2% from 2012-2022. By contrast, Australia (-1.5%) and Germany (-3.2%) illustrated a downward trend over the same period. From 2012 to 2022, the share of China, Italy, the Netherlands, India and Turkey increased by +16, +4, +2.7, +2.3 and +1.8 percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplying countries worldwide were China ($X), Germany ($X) and Italy ($X), with a combined 47% share of global exports. Turkey, India, the Netherlands, Spain and Australia lagged somewhat behind, together accounting for a further 11%.

India, with a CAGR of +10.8%, saw the highest growth rate of the value of exports, in terms of the main exporting countries over the period under review, while shipments for the other global leaders experienced more modest paces of growth.

Export Prices by Country

The average export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X per unit in 2022, with a decrease of -7.3% against the previous year. Over the period under review, the export price saw a abrupt decline. The pace of growth was the most pronounced in 2019 an increase of 70% against the previous year. The global export price peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.

There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Germany ($X per unit), while Australia ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Germany (-1.5%), while the other global leaders experienced a decline in the export price figures.

Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Imports

In 2022, global imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids dropped slightly to X units, waning by -3.2% against the previous year's figure. Over the period under review, imports continue to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2016 with an increase of 40%. As a result, imports attained the peak of X units. From 2017 to 2022, the growth of global imports of remained at a lower figure.

In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids rose rapidly to $X in 2022. Overall, imports saw a slight decline. The pace of growth was the most pronounced in 2021 with an increase of 15% against the previous year. Over the period under review, global imports of reached the peak figure at $X in 2012; however, from 2013 to 2022, imports stood at a somewhat lower figure.

Imports by Country

The United States (X units) and Algeria (X units) were the largest importers of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in 2022, resulting at approx. 9.2% and 8.8% of total imports, respectively. It was followed by Russia (X units), comprising a 4.8% share of total imports. The following importers - India (X units), Egypt (X units), Indonesia (X units), Germany (X units), France (X units), Saudi Arabia (X units), Pakistan (X units), Nigeria (X units), Uzbekistan (X units) and Kazakhstan (X units) - together made up 27% of total imports.

From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Pakistan (with a CAGR of +19.8%), while imports for the other global leaders experienced more modest paces of growth.

In value terms, the United States ($X), Indonesia ($X) and Russia ($X) constituted the countries with the highest levels of imports in 2022, together comprising 21% of global imports. Pakistan, Uzbekistan, Germany, India, France, Kazakhstan, Nigeria, Algeria, Saudi Arabia and Egypt lagged somewhat behind, together accounting for a further 22%.

In terms of the main importing countries, Pakistan, with a CAGR of +34.2%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other global leaders experienced more modest paces of growth.

Import Prices by Country

The average import price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X per unit in 2022, rising by 13% against the previous year. In general, the import price, however, recorded a slight reduction. The growth pace was the most rapid in 2017 when the average import price increased by 47%. Global import price peaked at $X per unit in 2013; however, from 2014 to 2022, import prices remained at a lower figure.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Indonesia ($X per unit), while Egypt ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Pakistan (+12.0%), while the other global leaders experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :