Overview of the Global Market for Prefabricated Buildings Of Plastics, Concrete Or Aluminium

Market Size for Prefabricated Buildings Of Plastics, Concrete Or Aluminium

The global market for prefabricated buildings of plastics, concrete or aluminium was finally on the rise to reach $X in 2021, after two years of decline. The market value increased at an average annual rate of +1.8% from 2012 to 2021; however, the trend pattern remained relatively stable, with only minor fluctuations throughout the analyzed period. As a result, consumption attained the peak level of $X. From 2019 to 2021, the growth of the global market failed to regain momentum.

Production of Prefabricated Buildings Of Plastics, Concrete Or Aluminium

In value terms, production of prefabricated buildings of plastics, concrete or aluminium amounted to $X in 2021 estimated in export price. The total output value increased at an average annual rate of +1.4% from 2012 to 2021; however, the trend pattern remained consistent, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2018 when the production volume increased by 18% against the previous year. Global production peaked at $X in 2019; however, from 2020 to 2021, production remained at a lower figure.

Exports of Prefabricated Buildings Of Plastics, Concrete Or Aluminium

Exports

In 2021, the amount of prefabricated buildings of plastics, concrete or aluminium exported worldwide skyrocketed to X tons, picking up by 17% on 2020 figures. The total export volume increased at an average annual rate of +2.1% from 2012 to 2021; the trend pattern remained relatively stable, with only minor fluctuations throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.

In value terms, exports of prefabricated buildings of plastics, concrete or aluminium soared to $X in 2021. The total export value increased at an average annual rate of +2.6% over the period from 2012 to 2021; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being observed throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.

Exports by Country

China was the main exporting country with an export of about X tons, which reached 24% of total exports. Estonia (X tons) held a 7% share (based on physical terms) of total exports, which put it in second place, followed by the Czech Republic (5.2%). Croatia (X tons), the Netherlands (X tons), Germany (X tons), Lithuania (X tons), Poland (X tons), Belgium (X tons), Turkey (X tons), Slovenia (X tons), Canada (X tons) and Italy (X tons) followed a long way behind the leaders.

Exports from China increased at an average annual rate of +2.9% from 2012 to 2021. At the same time, Croatia (+33.5%), Poland (+9.4%), Lithuania (+9.3%), Estonia (+8.0%), Italy (+5.4%), the Czech Republic (+5.0%), Slovenia (+4.7%), Belgium (+3.6%), the Netherlands (+3.2%) and Canada (+1.6%) displayed positive paces of growth. Moreover, Croatia emerged as the fastest-growing exporter exported in the world, with a CAGR of +33.5% from 2012-2021. By contrast, Turkey (-1.6%) and Germany (-3.4%) illustrated a downward trend over the same period. Croatia (+4 p.p.), Estonia (+2.8 p.p.), Lithuania (+1.9 p.p.), Poland (+1.7 p.p.) and China (+1.5 p.p.) significantly strengthened its position in terms of the global exports, while Germany saw its share reduced by -2.7% from 2012 to 2021, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, China ($X) remains the largest prefabricated buildings of plastics, concrete or aluminium supplier worldwide, comprising 18% of global exports. The second position in the ranking was held by the Netherlands ($X), with a 7% share of global exports. It was followed by Estonia, with a 5.5% share.

In China, exports of prefabricated buildings of plastics, concrete or aluminium expanded at an average annual rate of +2.8% over the period from 2012-2021. The remaining exporting countries recorded the following average annual rates of exports growth: the Netherlands (+7.9% per year) and Estonia (+10.4% per year).

Export Prices by Country

The average export price for prefabricated buildings of plastics, concrete or aluminium stood at $X per ton in 2021, growing by 7.3% against the previous year. Overall, the export price recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 an increase of 16% against the previous year. The global export price peaked in 2021 and is likely to continue growth in years to come.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Italy ($X per ton), while Croatia ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by the Netherlands (+4.6%), while the other global leaders experienced more modest paces of growth.

Imports of Prefabricated Buildings Of Plastics, Concrete Or Aluminium

Imports

In 2021, overseas purchases of prefabricated buildings of plastics, concrete or aluminium increased by 60% to X tons for the first time since 2016, thus ending a four-year declining trend. In general, imports recorded a resilient expansion. The pace of growth appeared the most rapid in 2016 with an increase of 100% against the previous year. As a result, imports reached the peak of X tons. From 2017 to 2021, the growth of global imports of remained at a lower figure.

In value terms, imports of prefabricated buildings of plastics, concrete or aluminium soared to $X in 2021. The total import value increased at an average annual rate of +2.5% from 2012 to 2021; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. As a result, imports attained the peak and are likely to continue growth in the immediate term.

Imports by Country

Pakistan represented the major importing country with an import of around X tons, which reached 29% of total imports. Germany (X tons) ranks second in terms of the total imports with a 7.9% share, followed by Indonesia (6.7%). The following importers - France (X tons), Norway (X tons), Sweden (X tons), the Netherlands (X tons), the UK (X tons), Canada (X tons), Switzerland (X tons) and Ireland (X tons) - together made up 21% of total imports.

Pakistan was also the fastest-growing in terms of the prefabricated buildings of plastics, concrete or aluminium imports, with a CAGR of +69.0% from 2012 to 2021. At the same time, Ireland (+41.0%), Indonesia (+32.3%), Sweden (+23.3%), the Netherlands (+14.5%), the UK (+10.0%), Germany (+7.0%) and France (+1.1%) displayed positive paces of growth. Norway experienced a relatively flat trend pattern. By contrast, Switzerland (-4.7%) and Canada (-7.1%) illustrated a downward trend over the same period. Pakistan (+29 p.p.), Indonesia (+5.8 p.p.), Sweden (+2.1 p.p.) and Ireland (+1.6 p.p.) significantly strengthened its position in terms of the global imports, while France, Norway, Switzerland and Canada saw its share reduced by -1.9%, -2.2%, -3% and -5.3% from 2012 to 2021, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Germany ($X) constitutes the largest market for imported prefabricated buildings of plastics, concrete or aluminium worldwide, comprising 11% of global imports. The second position in the ranking was held by Norway ($X), with a 4.7% share of global imports. It was followed by the Netherlands, with a 4.4% share.

From 2012 to 2021, the average annual rate of growth in terms of value in Germany totaled +9.3%. In the other countries, the average annual rates were as follows: Norway (+0.8% per year) and the Netherlands (+20.3% per year).

Import Prices by Country

In 2021, the average import price for prefabricated buildings of plastics, concrete or aluminium amounted to $X per ton, waning by -17.6% against the previous year. Over the period under review, the import price showed a perceptible slump. The growth pace was the most rapid in 2018 an increase of 57%. Over the period under review, average import prices attained the peak figure at $X per ton in 2012; however, from 2013 to 2021, import prices remained at a lower figure.

There were significant differences in the average prices amongst the major importing countries. In 2021, amid the top importers, the country with the highest price was the Netherlands ($X per ton), while Pakistan ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by the Netherlands (+5.0%), while the other global leaders experienced more modest paces of growth.

Source: IndexBox Platform